PDA

View Full Version : here is X480 repair "keypad not work"


mru
02-25-2006, 22:15
http://mru.czechian.net/girder/x480_keyboard_failure.jpgHi friends! Hear I put my picture for "Samsung SGH-X480 keypad not work". Phone switch on immediately after battery plug in? Keyboard has no response? Remove some varistors (all if you want). This 3 was enough for my case.

Kashif Khan
02-25-2006, 22:32
Thanx for the share.
BR
Kashif Khan

masterspargo
02-27-2006, 14:36
Remove 5 varistors more when that's goood work 1000%

no_man1123@yahoo.com

fadhel
06-24-2006, 11:01
ok 100/100 after remove all 13 resistors.
thanks

TRABEL
06-24-2006, 11:23
http://mru.czechian.net/girder/x480_keyboard_failure.jpgHi friends! Hear I put my picture for "Samsung SGH-X480 keypad not work". Phone switch on immediately after battery plug in? Keyboard has no response? Remove some varistors (all if you want). This 3 was enough for my case.


THANK YOU !!! JUST IN TIME
i hope this will solve my problem , PWR key not working after i turn phone on.
all other keys are working
gonna try it later today and post results
thx

TRABEL
06-24-2006, 14:07
nm
found my problem , was missing 3 leg components under pwr key on the main board
fixed it all working

simlockmaster
07-27-2006, 11:46
thx is working :):):):):):););)

gbluez
08-02-2006, 01:33
Any solution for this case?
-when i press power on and hold it, phone is powered up.
But when i release it, it shuts down immediately.
How?

BR

mobile.gsm
08-18-2006, 13:41
Any solution for this case?
-when i press power on and hold it, phone is powered up.
But when i release it, it shuts down immediately.
How?

BR

Very Thanks

VeryGooooooooooooooood

:D

nycu
08-29-2006, 12:35
Hi I have an X480 with keypad still not working after I removed all the varistors.
Do you have any solution for this pls?

murthyy
03-27-2007, 12:31
After removing the varistors it works well thanks all

ctl
06-20-2007, 16:42
THX A LOT> 100%!
Keep sharing a helping
. Worked 100%

UnlockingLab
06-20-2007, 23:22
Yes tried works.
Good

nems
08-27-2007, 23:53
nice ! coool guys , worked perfectly , i got a x480 water damaged , and working by pressing ON but not responding when key pressed, worked after removing the 13 , thanx

sudais_rizwan
08-28-2007, 17:07
this solution is normally can be applied on all the samsung with pwr key working but rest of the keys are not working if this dont work resold ur mic , change or resold the volume keys that will help

zullu2004
10-16-2007, 07:41
:D:D:D:Dvery nice solution, after removing all, phone ok, thx for sharing :D:D:D

fadhel
10-16-2007, 09:25
good ,now what about e900 ??

delchoni
10-23-2007, 12:58
Im Have Same Problem WitH E900 Key NotH Work SENSOR ALL IS OKK BUT 1234567890...... NOTH WORK

delchoni
10-23-2007, 15:28
problem solved remove varistor zd310 and zd311 100% solutions tested