alcatel db dead

[joe locks]

i have a few alcatel db that are dead i reflowed the entire board but no joy any ideas will be appreciated

[jonwillow]

Try check all resistors in power area.<br />If you have software problem, use SW Alcatel repairer.<br />You can't read phones with any sw ??<br />http://www.hot.ee/ssservice/yanch.gif

[Williamcwy]

Please replace Power IC, sure ok one...

[sidharthaharish]

hai friend <br />follow these steps<br />1 first find whether its a hardware or software problem....if the resistance between the positive and negative terminals is less than 1000ohms its hardware complaint...you have to replace power ic....if you dont have power ic with you, you can try shorting pin number 2 and 3 of power ic...the phone will be ok....<br />2 if its a software problem use be1srv12.3to cure your phone...90%phone will be cured.. <br />3 if not cured the best software is andromeda5.9..try the user default option in it..if not cured you have to flash the phone using andromeda with correct version...<br />best of luck and please inform me about the result..<br />thanking all zfrank friends <br />sidhartha harish<br /> harish@net-city.com <img src="wink.gif" border="0"> <img src="wink.gif" border="0"> <img src="wink.gif" border="0"> <img src="wink.gif" border="0"> <img src="wink.gif" border="0">

[makgsm]

i have four alcatel be4 dead

idon't know what's the pb

i selled with this pb

[MobileSoft]

All dead alcatel wit hardware problem, usually PTW IC (Powerchip).

First try and short pin 2 and 3 if this not work - replace - Works most of the time!

To the South African dude who posted this msg - If u still need help or need any other help - Call me - 0827687778

[arti123a]

where i find powerchip in pcb ??
alcatel db

[ARS]

Is it a big IC near SIM connector
PTWL2207

[arti123a]

thanks ARS !!!

[iqballk]

short 1+2+3 pins in ptw..