View Full Version : Widcomm 5.0.1.1400
adisor19
03-02-2006, 05:51
Hello everyone,
I have managed to obtain a heavily customised version of Widcomm 5.0.1.1400 from ANYCOM. The reason i mention it's heavilly customised, it's cause the btwusb.inf file included only has support for their USB dongles. Everything else has been stripped out so in order for it to work with other dongles, just replace the VID and PID in there with the one from your own dongle and it should then work. I might also suggest to just use the btwusb.inf files from the previous .1200 release but i don't guarantee it will work ok..
I have tested the license.dat that Phantasm had made for the .1200 version and it does not work. It complains that we can't use a licence file that was designed for a previous version of Widcomm so unless he can make us another version for .1400, WinXP x86 64bit users are out of luck :(
I then used the Widcomm V2 patcher that is mentioned in one of the previous threads and to my surprise, IT WORKS ! There is just one slight problem in that the little bluetooth icon that normally apears in the system tray is nowhere to be found. However, if one goes into "my bluetooth places" everything's there and working fine.
Why i think this release is important : beacause it seems it's the only one that works with the new Plantronics 590 Pulsar headset as described here :
http://bluetoothbob.atspace.com/Pulsar590PlantronicsHeadsetWithAnycom.htm
Here are the official fixes compared to previous 4.0.1.xxxx version as posted on the ANYCOM support forums :
- Support for A2DP Profile as SNK
- Support for A2DP Profile on Windows 98SE/ME
- Support for Basic Printing Profile
- Support for Windows XP x64 edition
- Local PC can now be used as Bluetooth print server
- Enhanced security
Oh, and here's the link :
http://www.megaupload.com/?d=Z2KWUOFF
Enjoy :)
Adi
Yolly Zubrick
03-02-2006, 17:01
wowoweeeeee :) Keep up the good work dude! :D :D :D
adisor19
03-02-2006, 17:42
wowoweeeeee :) Keep up the good work dude! :D :D :D
Hehe just giving back to the comunity the little that i can :)
Btw, i installed it on a different machine, and patched it the same way and this time the System Tray icon is there :eek: Results may vary i guess..
Adi
Hello Adi,
May I know more about the Widcomm V2 Patcher. Where is I can download this file.
Thank you very much.
adisor19
03-02-2006, 21:25
Hello Adi,
May I know more about the Widcomm V2 Patcher. Where is I can download this file.
Thank you very much.
I see that wasn't clear enough... You can download it from this thread :
http://forum.gsmhosting.com/vbb/showthread.php?t=264945
Adi
Phantasm4489
03-03-2006, 00:45
The license.dat files are specific to a version of widcomm.
Attached is the version that should work with this release.
I got it working by doing the following:
1) Remove any previous widcomm installations
2) overwrite the btwusb.info from the previous 5.0.1.1200 version (in the win32 & win64 folders)
3) copy the license.dat in here over the license.dat in the anycom widcomm 5.0.1.1400 folder
4) Install anycom widcomm 5.0.1.1400
5) Make sure the drivers are installed correctly (eg. if the microsoft bluetooth drivers installed then update the driver to the correct widcomm driver)
6) Reboot
That should do it.
(Tested on both 32bit and 64bit installs)
bonehead1
03-03-2006, 01:55
I got it to work using the ver.2 patcher, and modding the .inf thanx
adisor19
03-03-2006, 04:51
The license.dat files are specific to a version of widcomm.
Attached is the version that should work with this release.
I got it working by doing the following:
1) Remove any previous widcomm installations
2) overwrite the btwusb.info from the previous 5.0.1.1200 version (in the win32 & win64 folders)
3) copy the license.dat in here over the license.dat in the anycom widcomm 5.0.1.1400 folder
4) Install anycom widcomm 5.0.1.1400
5) Make sure the drivers are installed correctly (eg. if the microsoft bluetooth drivers installed then update the driver to the correct widcomm driver)
6) Reboot
That should do it.
(Tested on both 32bit and 64bit installs)
My hat's off to you Phantasm4489 :)
Can any of you peeps with WinXP 64bit test the licence file and confirm it works ? (it's about the only solution for 64bit windows for the moment..)
Adi
The Megaupload server was busy yesterday, so I D/L it this morning.
Just replace the btwusb.inf with the one from .802 plus the V2 patch, now its working smoothly. There is one thing I have noticed. After updated from .802 to .1200, my BT mouse movement shows intermittent pause. Its kind of annoying. But this issue got fixed in .1400.
Just found out that my WinXP won't shut down properly now. Anyone has the similiar issue?
2) overwrite the btwusb.info from the previous 5.0.1.1200 version (in the win32 & win64 folders)
I'll try this evening on my xp64 but it's my first time ...
Someone can give a link to this .inf file ? I would like it without dw the 1200 version if it's possible.
If I unterstand this inf file it's the list of the devices supported by the drivers ? I've a D-Link DBT-122 do you know if this device is supported ?
Thanks for your help !
Matthieu
willjcroz
03-03-2006, 12:09
Hi, here are the infs from 5.0.1.1200 i have included both from win32 and win64 directories (tey are probably the same but just in case!)
:D
Will
thx you ! I'll post an update this evening when i'll be @home.
Matthieu
reachhusain
03-03-2006, 15:27
Has anyone managed to get these drivers to work with A2DP headphones? I still have the problem whereby the bluetooth connection seems to initiate but but terminates almost immediately thereafter. I used the btwusb.inf from the Widcomm 5.0.1.802 (after copying the header containing the version number from the new inf) for installation. The headset and com profiles seem to be working fine.
The headphones I am using (Sonorix OBH0110) worked fine with the Widcomm 4.0.1.21 drivers which I was using before trying these drivers.
I would really appreciate any suggestions.
Thanks!
adisor19
03-03-2006, 15:37
Has anyone managed to get these drivers to work with A2DP headphones? I still have the problem whereby the bluetooth connection seems to initiate but but terminates almost immediately thereafter. I used the btwusb.inf from the Widcomm 5.0.1.802 (after copying the header containing the version number from the new inf) for installation. The headset and com profiles seem to be working fine.
The headphones I am using (Sonorix OBH0110) worked fine with the Widcomm 4.0.1.21 drivers which I was using before trying these drivers.
I would really appreciate any suggestions.
Thanks!
Follow the instruction on the link i posted : http://bluetoothbob.atspace.com/Pulsar590PlantronicsHeadsetWithAnycom.htm
Looks like the key reason why it disconnects is because a media player program is not running at the time the connection is established.
Adi
reachhusain
03-03-2006, 15:43
Adi,
Thanks for your reply. I had Windows Media Player running when I tried connecting but still no luck. I remember reading that others were having these problems with earlier versions of the Widcomm 5 drivers but I haven't been visiting the forum regularly for the past couple of months. Did anyone report being able to use A2DP with the 1200 drivers?
adisor19
03-03-2006, 15:48
Adi,
Thanks for your reply. I had Windows Media Player running when I tried connecting but still no luck. I remember reading that others were having these problems with earlier versions of the Widcomm 5 drivers but I haven't been visiting the forum regularly for the past couple of months. Did anyone report being able to use A2DP with the 1200 drivers?
So your media player was actually playing an mp3 and then you connected the headphones but still nothing ? What BT version is your dongle ?
As far as .1200 version goes, i don't recall anyone having luck with it and A2DP.
Adi
reachhusain
03-03-2006, 15:54
Yup, there was an mp3 file playing when I tried to connect.
I am using a CSR bluetooth 1.2 chip which is integrated into my laptop. Hoping I won't have to go back to the Widcomm 4 drivers...
I follow the steps provided by Phantasm4489 and the inf files from willjcroz and it works great on my configuration :
dongle d-link dbt-122 - windows xp64 - jabra 250
I get the popup withn the limit to 24578964 days :)
Thanks a lot !
Matthieu
s0346821
03-03-2006, 20:53
Thanks for your reply. I had Windows Media Player running when I tried connecting but still no luck. I remember reading that others were having these problems with earlier versions of the Widcomm 5 drivers but I haven't been visiting the forum regularly for the past couple of months. Did anyone report being able to use A2DP with the 1200 drivers?
Broadcom 2045 USB with Anycom BSH-100 Stereo Headset, have tested with Software: Windcomm 5.0.1.1200, Widcomm (Anycom) 5.0.1.1400
A2DP works fine with both Software; I think they are the same.
reachhusain
03-03-2006, 21:17
s0346821,
Could you tell me the exact method you used to install the drivers? I think the BSH-100 is pretty much the same as the Sonorix headphones that I have but I have had no luck in getting A2DP to work with the Widcomm 5 drivers.
Let me know if you have any suggestions.
Thanks!
kalpik25
03-04-2006, 05:10
Can someone please upload it on Rapidshare? Megaupload never lets me download!
Can someone please upload it on Rapidshare? Megaupload never lets me download!
5.0.1.1400 in Filefactory
http://www.filefactory.com/get/v3/f2.php?f=da085c82fcb3e29dd7279785
working ok on Msi Btoes 2 BT2.0 (Broadcom 2045)
The license.dat files are specific to a version of widcomm.
Attached is the version that should work with this release.
i can not download that file, site asks me for login and pass even if i'm already logged in. I can downlad other files, but that cant.
could you check the link or send me (zupa@home.se) that file?
Scramble
03-08-2006, 02:54
Created a simple all-in-one patched single file installer for Widcomm 5.0.1.1400
Get it here:
http://www.filefactory.com/get/f.php?f=d13f512d5af8519e52a1a964
or p2p download
ed2k://|file|Widcomm%205.0.1.1400%20patched.exe|38236721| 70319501ad7eb0abe3fa23244d5b6bcc|/
magnet:?xt=urn:bitprint:IHDMCEAJT6PLDHYBQXAAS42EF3 SFQD76.IFMQLDBVVJZLJ3FKGVSWXI4RWRJBDD2ANUKKNAA&dn=Widcomm%205.0.1.1400%20patched.exe
blackg35
03-08-2006, 03:10
whats the difference between 5.0.1.1400 and 5.0.1.1200?
adisor19
03-08-2006, 04:47
whats the difference between 5.0.1.1400 and 5.0.1.1200?
Bug fixes it seems, mostly in regards to A2DP profile, but knowing Widcomm(now Broadcom), there's probably more then just that..
Adi
Digitallwz
03-10-2006, 09:39
Hello everyone,
Everything else has been stripped out so in order for it to work with other dongles, just replace the VID and PID in there with the one from your own dongle and it should then work. I might also suggest to just use the btwusb.inf files from the previous .1200 release but i don't guarantee it will work ok..
Adi
can you explain how i can change VID and PID and where i can find them :confused:
I did the following: YMMV
NB: GET YOUR VID and PID. Right click MY COMPUTER -> HARDWARE -> DEVICE MANAGER -> BLUE TOOTH DEVICES -> DOUBLE CLICK on your dongle -> DETAILS -> SWOP I/O DEVICE to PEN + PAPER -> WRITE DOWN DEVICE ID VID AND PID. You are going to reboot .. so don't copy and paste.. unless you do it to a file.
NBB: HARDWARE DISABLE BLUETOOTH BY PRESSING YOUR WIRELESS BUTTON ON YOUR NOTEBOOK OR UNPLUG YOUR DONGLE - KEEP IT DISABLED TILL I TELL YOU TO PLUG IT IN!
1) IMPORTANT : Uninstall ANY version of stack that you have ( DO NOT UPGRADE )
2) Downloading raw 1400 anycom version
3) Get phantasm's license.dat and overwrite the one in the anycom software install directory
4) Install software - Cancel when it looks for the dongle.
5) Reboot when prompted
6) Manually change VID and PID in C:\Program Files\ANYCOM\Blue USB-200-250\bin\btwusb.inf
7) Enable/Plug in your Bluetooth dongle
8) During detection point it at C:\Program Files\ANYCOM\Blue USB-200-250\bin\
Once it has successfully installed the AnyCom Device:
Use the Bluetooth WIZARD to find the headset AND Pair it at the same time. Make sure ALL other bluetooth devices are switched off ( i.e. mobile phone's, mice ..etc ). Media player does not need to be open.
These work well .. (the least 30 minutes or so ) http://www.logitech.com/index.cfm/products/large_view/ZA/EN,crid=103,contentid=10679,sh=1
Need to play somemore.. but it's been a long time since they worked .. thanks all for your collective submissions.
update: headphones work with targus mini bluetooth mouse connected, no audible distortion ( unlike v4. stack )
Created a simple all-in-one patched single file installer for Widcomm 5.0.1.1400
Get it here:
http://www.filefactory.com/get/f.php?f=d13f512d5af8519e52a1a964
or p2p download
ed2k://|file|Widcomm%205.0.1.1400%20patched.exe|38236721| 70319501ad7eb0abe3fa23244d5b6bcc|/
magnet:?xt=urn:bitprint:IHDMCEAJT6PLDHYBQXAAS42EF3 SFQD76.IFMQLDBVVJZLJ3FKGVSWXI4RWRJBDD2ANUKKNAA&dn=Widcomm%205.0.1.1400%20patched.exe
how is it that this file is only half the size of the original download ? thanks anyways will try
how is it that this file is only half the size of the original download ? thanks anyways will try
I also tried the file factory link ... its a pain in the arse with the click here .. click there .. and then d/l speed is slower than a modem.
Gionames
03-15-2006, 01:47
No matter what I do, I've followed all the tips in this thread (license.dat, inf file, Widcomm patcher v2) but I always get the nagging window which says this is a tryout version, although it seems the trial period is... some million days. Beside, on my CSR BC04 EDR dongle the .1400 version seems unable to enstablish a remote connection on a Nokia N70 UMTS phone. Also, no Widcomm 5 of sort seems to be able to find the BT serial profile of my Nokia.
Am I the only one having troubles?
Gio
mohit2010
03-15-2006, 10:03
I have installed the widcom 5.0.1.1400 drivers and they work well after the crack. My dongle connects to the Jabra BT200 headset and the driver shows it as connected. The specs of the Dongle are-- Integrated System Solution Corp. version 500 HVI version Bluetooth HCI 1.2 LMP version Bluetooth LMP 1.2 LMP Sub Version 01f4.
I am able to get audio in the ear fone of the head set. But the mic doesnt work . The settings for sound are as indicated in the forum i.e. blue tooth audio as default for in and out. The blue tooth devices in the device manage shows bluetooth bus enumerator and ISSC USB bluetooth device. Both are of Broadcom. I don't have MS bluetooth installed. Despite all this while i get the audio the mic doesnt work.I have tried and wasted at least 48 hours . Can someone help ????
I have installed the widcom 5.0.1.1400 drivers and they work well after the crack. My dongle connects to the Jabra BT200 headset and the driver shows it as connected. The specs of the Dongle are-- Integrated System Solution Corp. version 500 HVI version Bluetooth HCI 1.2 LMP version Bluetooth LMP 1.2 LMP Sub Version 01f4.
I am able to get audio in the ear fone of the head set. But the mic doesnt work . The settings for sound are as indicated in the forum i.e. blue tooth audio as default for in and out. The blue tooth devices in the device manage shows bluetooth bus enumerator and ISSC USB bluetooth device. Both are of Broadcom. I don't have MS bluetooth installed. Despite all this while i get the audio the mic doesnt work.I have tried and wasted at least 48 hours . Can someone help ????
my T43 has changed widcomm into IVT BLUESOLEIL,works fine..:cool:
eelnekeelnek
03-17-2006, 00:35
Hey, guys. I've got a problem installing these drivers and getting them to recognize the BT device. The device is a CSR chip that came with my laptop (Acer TM 8006lmi). This is what I did:
1. Turned off and uninstalled all BT related software/drivers/etc. I went to the Device Manager to double check that there were no BT devices listed.
2. Downloaded the .1400 installation files, the .1200 inf file, and Phantasm's license.dat file.
3. Unzipped the .1400 installation files, replaced the license.dat file with Phantasm's, and replaced the btwusb.inf file with the .1200 inf file.
4. Installed the .1400 drivers. Clicked 'Ok' when it asked to disable the Windows Certification warnings. Clicked 'Cancel' when asked to turn on device.
5. Completed installation. Didn't ask to reboot.
6. Turned on BT device, and Windows goes crazy finding tons of services/devices. Windows installs drivers automatically.
7. I can't find any BT hardware in 'My Bluetooth Places'.
What's going on here? Am I doing something wrong?
dilip kumar j
03-17-2006, 14:06
:) hi
thanks a lot i downloaded and installed on my xp the application is working,
regarding bluetooth headset i will check and post the reply.
Created a simple all-in-one patched single file installer for Widcomm 5.0.1.1400
Get it here:
http://www.filefactory.com/get/f.php?f=d13f512d5af8519e52a1a964
or p2p download
ed2k://|file|Widcomm%205.0.1.1400%20patched.exe|38236721| 70319501ad7eb0abe3fa23244d5b6bcc|/
magnet:?xt=urn:bitprint:IHDMCEAJT6PLDHYBQXAAS42EF3 SFQD76.IFMQLDBVVJZLJ3FKGVSWXI4RWRJBDD2ANUKKNAA&dn=Widcomm%205.0.1.1400%20patched.exe
Thanks for this, I now have both audio profiles working with the Plantronics 590A and a BCM92045DG dongle. Good work, only issue is that to get HQ audio through the 'phones I usually need to switch several times between mono and HQ (shows connected every time but audio only comes through about 1 in 3 switches) not a huge hassle and at least it works now.
niveathk
03-18-2006, 16:08
I have installed the widcom 5.0.1.1400 drivers and they work well after the crack. My dongle connects to the Jabra BT200 headset and the driver shows it as connected. The specs of the Dongle are-- Integrated System Solution Corp. version 500 HVI version Bluetooth HCI 1.2 LMP version Bluetooth LMP 1.2 LMP Sub Version 01f4.
I am able to get audio in the ear fone of the head set. But the mic doesnt work . The settings for sound are as indicated in the forum i.e. blue tooth audio as default for in and out. The blue tooth devices in the device manage shows bluetooth bus enumerator and ISSC USB bluetooth device. Both are of Broadcom. I don't have MS bluetooth installed. Despite all this while i get the audio the mic doesnt work.I have tried and wasted at least 48 hours . Can someone help ????
hey, i am having the same problem as you, exactly the same. i come to this conlcusion.
the issc chipset dont support audio headset. i can email you my photo of the issc blue tooth. I have tried widcom and bluesoil. none work.
I bought first bluetooth dongle for 25 sgd, it failed.
I bought another brand, for 20 sgd, failed again.
Both brands claimed to be class 1, which is 100meter.
I was frustrated. I striped open both dongle to see what is the chipset, both are actually issc.
i bought another bluetooth dongle, this time, it is the bluetooth version 2.0, class one, at 29 sgd, from simlimsquare. it works beautifully with toshiba software bundled.
hey, i am having the same problem as you, exactly the same. i come to this conlcusion.
the issc chipset dont support audio headset. i can email you my photo of the issc blue tooth. I have tried widcom and bluesoil. none work.
I bought first bluetooth dongle for 25 sgd, it failed.
I bought another brand, for 20 sgd, failed again.
Both brands claimed to be class 1, which is 100meter.
I was frustrated. I striped open both dongle to see what is the chipset, both are actually issc.
i bought another bluetooth dongle, this time, it is the bluetooth version 2.0, class one, at 29 sgd, from simlimsquare. it works beautifully with toshiba software bundled.
you should try CSR dongle with IVT bluesoleil. works fine:D
lgfclient
03-19-2006, 19:56
No matter what I do, I've followed all the tips in this thread (license.dat, inf file, Widcomm patcher v2) but I always get the nagging window which says this is a tryout version, although it seems the trial period is... some million days. Beside, on my CSR BC04 EDR dongle the .1400 version seems unable to enstablish a remote connection on a Nokia N70 UMTS phone. Also, no Widcomm 5 of sort seems to be able to find the BT serial profile of my Nokia.
Am I the only one having troubles?
Gio
First of all, thank you to Adi for the post. It works great!
I tried this several ways before getting rid of the nag screen. On the 5th try, there has been no nag screen for over 48 hours. My recommendation follows. YMMV
1. Uninstall any previous installations
2. Download the full 5.0.1.1400 (not the pre-patched version)
3. Download the V2 patcher
4. Replace the btwusb.inf with the one from 5.0.1.1200 or modify yourself to include the PID/VID for your device
5. Do not replace the license.dat
6. Install 5.0.1.1400
7. Reboot in safe mode
8. Run the patcher
9. Reboot in normal mode
10. Insert your device, and when prompted, point the install hardware to the bin folder that contains the btwusb.inf
Good luck!
Lord Reaper
03-20-2006, 04:58
Hi guyz, I had been looking for billionton bluetooth v2.0 +edr usb adapter (toshiba) driver for almost a month.. then I found a post on Nfree forum which is about using widcomm driver for all bt devices. and a link for an installation guide. then I read this thread but all of them so complex.. here is the simplest way to install widcomm driver ever! btw I registered this forum for only post this msg.
1) Download all-in-one patched single file installer for Widcomm 5.0.1.1400 *
2) Uninstall ANY version of stack that you have (NO UPGRADE)
3) Reboot your system
4) Install software - Cancel when it looks for the dongle to continue installation without driver (you do not have to disable or unplug your dongle)
5) Manually delete your device's VID and PID line from [ControlFlags] part in C:\Program Files\ANYCOM\Blue USB-200-250\bin\btwusb.inf file.
here is the line for billionton v2.0 +edr "ExcludeFromSelect = USB\VID_0A12&PID_0001" (everybody says "change", but nobody says how to change, what to change, where to change.. and besides I never found anything to change.. there is an exclude list in the file which anycom put almost all brand's pid&vids to prevent use their software with other bt devices. I think if you delete all pid&vids then you can use it with almost any bt devices)
6) Unplug and Plug in your Bluetooth dongle
7) Let windows automaticaly installs your device driver (mine is CSR usb bt)
8) have fun :)
in this way, I never use any patch or license file, sometimes I get an pop up which says:
ANYCOM Blue USB-200/250 Software 5.0.1.1400
This is an evaluation copy of ANYCOM Blue USB-200/250 Software 5.0.1.1400
Evaluation expires on ƒñâ@.
You have 268435557 days remaining on your evaluation.
here is the question: do I need to do the license replacement? and when I do it, will it make that pop up never appear again?
For Getting YOUR VID and PID: Start/Run/ Type devmgmt.msc for device manager (or Right click MY COMPUTER/HARDWARE/DEVICE MANAGER) BLUE TOOTH DEVICES/DOUBLE CLICK on your dongle/ (if you delete your bt driver then let windows find it with named Unknown USB Device, check details) DETAILS/ Device instant id: USB\VID_0A12&PID_0001
*all-in-one patched single file installer for Widcomm 5.0.1.1400
Get it here:
http://www.filefactory.com/get/f.php...f8519e52a1a964
or p2p download
ed2k://|file|Widcomm%205.0.1.1400%20patched.exe|38236721| 70319501ad7eb0abe3fa23244d5b6bcc|/
magnet:?xt=urn:bitprint:IHDMCEAJT6PLDHYBQXAAS42EF3 SFQD76.IFMQLDBVVJZLJ3FKGVSWXI4RWRJBDD2ANUKKNAA&dn= Widcomm%205.0.1.1400%20patched.exe
ps: I have no problem with pc suite, but OPM 4 symbian can not connect when bt serial port secure connection is selected. and I cant connect with widcomm software's serial port connection, when I press connect it connects then disconnects..
what is the difference between patched version and original version? why patched version is half size of the original one?
thx
syber_kowboy
03-23-2006, 01:10
First of all, thank you to Adi for the post. It works great!
I tried this several ways before getting rid of the nag screen. On the 5th try, there has been no nag screen for over 48 hours. My recommendation follows. YMMV
1. Uninstall any previous installations
2. Download the full 5.0.1.1400 (not the pre-patched version)
3. Download the V2 patcher
4. Replace the btwusb.inf with the one from 5.0.1.1200 or modify yourself to include the PID/VID for your device
5. Do not replace the license.dat
6. Install 5.0.1.1400
7. Reboot in safe mode
8. Run the patcher
9. Reboot in normal mode
10. Insert your device, and when prompted, point the install hardware to the bin folder that contains the btwusb.inf
Good luck!
This is the best method I've found. I did have to add my device to the .inf file. To do this you want to find the PID and VID that is closet to yours (after you find yours) and then copy and paste that line in below itself, then you can just edit the hex values (numbers and letters). You have to do this in two places. In the top section that is [ControlFlags] and then again in the lower section [WIDCOMM.NTx86.5.1].
No reg reminders and the A2DP works perfectly. My HT820 sound great. Everything works exactly the same as ver. 4. It seems a lot more stable though. Streaming radio is perfect and stops if the buffer gets wack. So far I really really like this stack. Thanks guys
Lord Reaper
03-23-2006, 17:31
I cant edit my previous post for this reason;
The administrator has specified that you can only edit messages for 2880 minutes after you have posted. This limit has expired, so you must contact the administrator to make alterations on your message.
and now here is the correct way to install widcomm driver:
1) Download all-in-one patched single file installer for Widcomm 5.0.1.1400 *
2) Uninstall ANY version of stack that you have (NO UPGRADE)
3) Install software - Cancel when it looks for the dongle to continue installation without driver (you do not have to disable or unplug your dongle)
4) You do not have to change/edit or mod anyfile!
5) Unplug and Plug in your Bluetooth dongle
6) Let windows automatically installs your device driver (mine is CSR usb bt)
7) have fun
in this way, you do not have to do any patch or license file but sometimes I get an pop up which says:
ANYCOM Blue USB-200/250 Software 5.0.1.1400
This is an evaluation copy of ANYCOM Blue USB-200/250 Software 5.0.1.1400
Evaluation expires on ƒñâ@.
You have 268435557 days remaining on your evaluation.
here is the question: how do I get rid of that damn pop up?
For Getting YOUR VID and PID (which you do not have to do this for this patched version): Start/Run/ Type devmgmt.msc for device manager (or Right click MY COMPUTER/HARDWARE/DEVICE MANAGER) BLUE TOOTH DEVICES/DOUBLE CLICK on your dongle/ (if you delete your bt driver then let windows find it with named Unknown USB Device, check details) DETAILS/ Device instant id (is like): USB\VID_0A12&PID_0001
*all-in-one patched single file installer for Widcomm 5.0.1.1400
http://www.filefactory.com/get/f.php...f8519e52a1a964
or p2p download
ed2k://|file|Widcomm%205.0.1.1400%20patched.exe|38236721| 70319501ad7eb0abe3fa23244d5b6bcc|/
magnet:?xt=urn:bitprint:IHDMCEAJT6PLDHYBQXAAS42EF3 SFQD76.IFMQLDBVVJZLJ3FKGVSWXI4RWRJBDD2ANUKKNAA&dn= Widcomm%205.0.1.1400%20patched.exe
ps: I have no problem with pc suite, but OPM 4 symbian can not connect when bt serial port secure connection is selected. and I cant connect with widcomm software's serial port connection, when I press connect it connects then disconnects..
ps2: the difference between original and patched version's sizes is original version has 64bit driver/software files too which means another 40mb..
Phantasm4489
03-23-2006, 22:46
I've only managed to find 1 way to get rid of the nag without a full crack so far (and i've not managed to crack the x64 version yet so you guys are stuck with these license replacements for now).
If you move the clock forward on your pc say 5 years then wait for the nag to appear and ok it. You can then move your clock back and it wont appear again till that date.
Please repost the patched one! It says hardware failure on a server, no longer available.
same problem, file deleted
Hi @Scramble,
please upload your patched file again.
An hardware error on the server killed your file previously uploaded!
Thank you!
Re-posting, I'll post the link in about 30 minutes when its finished uploading.
- Plowna
Here you go. (http://www.filefactory.com/get/f.php?f=1553e709116e1a4d82a3243e)
I have an HP bluetooth in my laptop that is not recognised (no driver) by Vista. I tried installing the 1400 stack, works fine, however any time I click "Start using Bluetooth" on the bluetooth systray icon (showing in white), i click Next-Next-Finish and RunDLL hangs and vista closes the wizard... is there anything I can do here? Maybe getting the integrated BT working with the MS stack?
I have meet a problem for x64 windows with this version. after installation, I want to setup PIM sync of phone with outlook, but the program could not find outlook, only outlook express listed in dropdown menu, does anybody meet this problem? In win32, I know its okay.
hey whenever i install this or any other version of widcomm and restart my pc, i get an error message saying
"BTTray.exe- Unable To Locate Component
This application failed to start because BtBalloon.dll was not found. Re-installing the application may fix this problem"
Reinstalling doesnt. any help please? Thanks.
the 'bluetooth configuration' in control opened and it found my dongle. my phone also finds my pc! but BTTray.exe wont open because of the problem above. how can i get BtBalloon.dll? thanks.
nvm i got the dll file from a driver download site. and drivers now work with my issc dongle. :)
Thanks for all your help and great dl's. :D
STNVIDNOYE
04-11-2006, 20:46
http://rapidshare.de/files/17725252/WIDCOMM_5.0.1.1400_Jabra.7z.html - full version from jabra headphone.
To russians:
Дистрибутив на поверку оказался странноватым. Во-первых, после установки пишет, что не могу найти btballoon.dll, при этом в дистрибутиве есть bballoon.dll - простое перименование этого файла (непосредственно в дистрибутиве, еще до инсталляции) помогает. Далее при установке на систему с русской локалью пишет, что не могу загрузить btrez.dll - помогают два варианта. Взять эту библиотеку из более старой версии драйвера (там, где русского языка еще не было), но при этом часть меню не работает (в дистрибутиве штук 17 этих файлов под разные локали, ни ни один не приводит к нормальной работе русского языка - испанский, французский и так далее работают). Либо в regional and language options WinXP установить все в english и unated states (в том числе - язык для non-unicode программ) и только после этиого ставить драйвер. В этом случае он ставтся в англоязычном варианте и работает, но не проверял что будет, когда вернешь русскую локаль. Этот глюк, мне кажется, вызван все же патчером файлов - с этой версией он, похоже, работает некорректно. Файл License.dat, что здесь пробегал и есть на гсмхосте, дает триал-период в кучу дней, что тоже не есть хорошо, так как, насколько я слышал, при этом остается ряд функциональных ограничений. версия 1200 у меня работала нормально.
Исходный дистрибутив, так как он шел на диске Jabra, я положил на ........ http://rapidshare.de/files/17725252/WIDCOMM_5.0.1.1400_Jabra.7z.html
Возможно по рузультатам экспериментов сделаю готовую патченную сборку, пока же не вижу в этом смысла - со старыми патчами все работает очень криво и нужно чтобы за дело взялись профессионалы, те кто делал патчеры для файлов и лицензии.
Yolly Zubrick
04-12-2006, 11:41
Wow, very helpfull... eer I don't understand a thing :D This is an English forum. Let's keep it that way please.
Пожалуйста напишите на английском языке. OK? :D [Babelfish it for translation.]
Amir-SkillZ
04-13-2006, 12:24
I need Software for My bluetooth ISSC HORUS Need drivers urgently....I lost my Cd actually Will Widcomm work on It ??????
apristel
04-21-2006, 05:59
So I can use these drivers like I am the .1200? On some generic pile china dongle?
damocles
04-21-2006, 22:57
Hey guys,
I have the DBT-120 dongle from D-Link.
I have downloaded the patched 1400 setup. I first removed my old software from the software list in config panel then rebooted and installed the patched anycom version.
I removed the VID/PID from the list and after that I unplugged and plugged in again my dongle.
It perfectly says DBT-120 dongle but it also shows enumerator thing and the bluetooth sign in my taskbar is red which isn't good.
It says it's not intstalled and at advanced configuration via right mouse click on the pictogram and hardware I see my dongle as hardware but also it says at status: Inactive, how to get it active?
Thanks a lot guys!
Hi guys, i have created this unbranded version of 5.0.1.1400. It's not branded to ANYCOM anymore (like .1200 was). It has a modified inf so works with all dongles that worked with .1200. And pre-patched so no need for the patcher or going to safe mode. just uninstall your existing software if any, reboot then install. after that update the drivers in device manager with the ones from the rar file. It's works great for me, i tested it with Nokia N70, bluetooth mouse & motorola hs810 headset. I think all the services are there but not sure if they are different than what was originally with the anycom branded version, can someone check for that?
thought someone would like an unbranded version.
http://rapidshare.de/files/18683118/BTW5.0.1.1400.rar.html
Hi guys, i have created this unbranded version of 5.0.1.1400. It's not branded to ANYCOM anymore (like .1200 was). It has a modified inf so works with all dongles that worked with .1200. And pre-patched so no need for the patcher or going to safe mode. just uninstall your existing software if any, reboot then install. after that update the drivers in device manager with the ones from the rar file. It's works great for me, i tested it with Nokia N70, bluetooth mouse & motorola hs810 headset. I think all the services are there but not sure if they are different than what was originally with the anycom branded version, can someone check for that?
thought someone would like an unbranded version.
http://rapidshare.de/files/18683118/....1400.rar.html
After few days of trying to make my pulsar 590A work with my belkin dongle in high quality audio stream I finally found your forum and got your package. After an update of the inf file, I got it connected !!! Thank you very much !!!!!
necroticism
04-23-2006, 16:01
Hi guys, i have created this unbranded version of 5.0.1.1400. It's not branded to ANYCOM anymore (like .1200 was). It has a modified inf so works with all dongles that worked with .1200. And pre-patched so no need for the patcher or going to safe mode. just uninstall your existing software if any, reboot then install. after that update the drivers in device manager with the ones from the rar file. It's works great for me, i tested it with Nokia N70, bluetooth mouse & motorola hs810 headset. I think all the services are there but not sure if they are different than what was originally with the anycom branded version, can someone check for that?
thought someone would like an unbranded version.
http://rapidshare.de/files/18683118/BTW5.0.1.1400.rar.html
I have had some problems in the past with the previous release of 5.0.1.1400 drivers found here but your version seems to be working alright on my desktop and laptop PC. Thanks for sharing. I have only had to add my PIDs to the INF file, usual business. No problems so far with Nokia N70, MS Outlook 2003, PC Suite, etc. :)
caliposistemas
04-24-2006, 16:18
Has anyone verificated that with this version the horrible nag screen indicating the days left in the license disspears?
Regards from Spain
Fran
STNVIDNOYE
04-25-2006, 08:26
caliposistemas
Do not use license patcher. Try this svcpack: http://rapidshare.de/files/17768309/svcpack_1400.zip.html and this distrib: http://rapidshare.de/files/17725252/WIDCOMM_5.0.1.1400_Jabra.7z.html
caliposistemas
Do not use license patcher. Try this svcpack: http://rapidshare.de/files/17768309/svcpack_1400.zip.html and this distrib: http://rapidshare.de/files/17725252/WIDCOMM_5.0.1.1400_Jabra.7z.html
How Do I to install a service pack?:confused:
STNVIDNOYE
04-28-2006, 07:43
Unpack driver archive, then Just unpack cracked files (svcpack_1400.zip) to svcpack folder. Install Driver.
tarzan_jj
05-19-2006, 02:50
I'm having problems connecting noname BT dongle with Jabra 250V (pairs and connects, but no audio though). Tested 3 different USB dongles so far, using different machines - no success so far. AlthoughI've managed to connect this Jabda with laptop's built-in BT device (HP, WIDCOMM stack) - works just fine. But I'd like to use my earpiece with my desktop computer as well...
Will this soft upgrade solve my problem?
BR,
tarzan
I could never get 1200 or 1400 to work with Audio .. either go back to 850 or go up to 2500.
I have an HP bluetooth in my laptop that is not recognised (no driver) by Vista. I tried installing the 1400 stack, works fine, however any time I click "Start using Bluetooth" on the bluetooth systray icon (showing in white), i click Next-Next-Finish and RunDLL hangs and vista closes the wizard... is there anything I can do here? Maybe getting the integrated BT working with the MS stack?
I can't get hid2hci to work in vista, nothing happens and my BT adapter still stuck at hid mode. Anyone have a solution to these 2 problems? I like Microsoft Anna voice and would like to hear it with BT headset.
thanks
Sorry for my English (is not really good). I'm writing from Italy.
I got a problem installing the Widcomm drivers. Yesterday I have decided to install the new 5.0... version but the Windows installer show me the follow message: " error initializing application setup.exe" (I don't know if it is the exact translation in English :-) in italian is "errore di inizializzazione dell'applicazione setup.exe") I have used previous 4.0... version without problem for a long time. Now i can't install the new program and I can't reinstall previous version too!
Anybody know the solution?
Thank you in advance.
owoweeeeee Keep up the good work dude!
I just got a pair of the motorola bluetooth ht820 stereo headphones and was wondering if anybody had the software profiles needed to get it to transmit audio with my dell inspirion laptop. The laptop is quite new and the built in bluetooth detects the headphones but doesn't transmit audio. Any help would be greatly appreciated. Thanks.
jignesh_1000
06-09-2006, 05:22
Can any tell can used demo not cracked can work and aslo internet
jignesh_1000
06-09-2006, 05:40
can any tell how to cracked useding demo version also internet have past in Widcomm.Bluetooth.Software.Drivers.v5.0.1.1400.Cra ck.folder in same folder so it cracked and can used internet
tigerlan
07-12-2006, 12:55
Hi guys, i have created this unbranded version of 5.0.1.1400. It's not branded to ANYCOM anymore (like .1200 was). It has a modified inf so works with all dongles that worked with .1200. And pre-patched so no need for the patcher or going to safe mode. just uninstall your existing software if any, reboot then install. after that update the drivers in device manager with the ones from the rar file. It's works great for me, i tested it with Nokia N70, bluetooth mouse & motorola hs810 headset. I think all the services are there but not sure if they are different than what was originally with the anycom branded version, can someone check for that?
thought someone would like an unbranded version.
http://rapidshare.de/files/18683118/BTW5.0.1.1400.rar.html
You are THE ONE :)
I've been struggling for the past couple of days to have my Billionton Bluetooth dongle V2.0 + EDR USBv2 recognized by the W**comm drivers as Microsoft always came in the way no matter how to the letter I followed Jon's guide (the bluetooth help authority on the web, I guess it's you now :D ).
I tried various W** v4 and V5 versions, and their patches to no avail.
And you came :D
After removing all the Widcomm or BlueSoleil drivers and files followed by a registry cleaning (not necessary though),
I rebooted my machine and cleared all bt*.dlls following Jon's guide (don't know if that made a difference though),
installed your unbranded package, hit cancel when it asked for the dongle and when it has finished installing,
did a reboot (not sure it was necessary),
plugged in my dongle, Microsoft kicked in :mad: to install its drivers and put two bluetooth icons in my system tray (the W**comm in dark blue and white and the Microsoft icon in lighter blue and white)... But no sweat :cool: , you'll see.
went to device managers and found
the W**comm Bluetooth Devices with only the Bluetooth Enumerator and not the other line for my bluetooth dongle,
which was in the Microsoft Bluetooth Devices section with the Microsoft Bluetooth Enumerator and its Generic Bluetooth Device :confused:
I noted down the info about the VID & PID of my dongle (Device Manager, Microsoft Bluetooth, Generic Device) (mine is USB\VID_0A12&PID_0001)
did a sanity check in the installation folder (c:\program files\W**comm\bluetooth software\bin) that the btwusb.inf has the VID & PID of my device
went back to Device Manager, Microsoft bluetooth devices, right-click on Generic device, manual driver update pointing to c:\program files\W**comm\bluetooth software\bin... Et Voilà ;)
the system removed on its own the Microsoft Bluetooth Devices section and just kept the [W**comm] Bluetooth Devices section with its W**comm bluetooth enumerator and CSR USB Bluetooth DeviceI made a very long description for those who would need it but it is really simple.
So to resume, there is no patch to install, no reboot in safe mode, no fiddling for modifying the btwusb.inf file.
It's working just fine for my Nokia 8800 with various mobile phone manager softwares.
CONGRATULATIONS to zonly1
and thank you
SeannPerry
07-26-2006, 06:50
I've tried most of these ways, to no avail. I've got the issc chipset.
each time i install the dongle, device manager puts it in the USB section, not the bluetooth section. thus the device isnt recognized. what do I need to do?
Hi guys, i have created this unbranded version of 5.0.1.1400. It's not branded to ANYCOM anymore (like .1200 was). It has a modified inf so works with all dongles that worked with .1200. And pre-patched so no need for the patcher or going to safe mode. just uninstall your existing software if any, reboot then install. after that update the drivers in device manager with the ones from the rar file. It's works great for me, i tested it with Nokia N70, bluetooth mouse & motorola hs810 headset. I think all the services are there but not sure if they are different than what was originally with the anycom branded version, can someone check for that?
thought someone would like an unbranded version.
http://rapidshare.de/files/18683118/BTW5.0.1.1400.rar.html
Works great! Thanks mate!
BTW!
First, I try v5.0.1.700 with no success... My dongle is CRS rev.373 - very old :) I was able to install it, but after that, no service was discovered for my mobile phone.
ganesh_n
07-29-2006, 07:45
i have bh200 bluetooth headset.iam using n70,when i pair the headset its paired.but unable to connect.pls any solution
I have a Jabra a320s dongle. No luck with original software CD. I try the WIDCOMM_5.0.1.1400_Jabra.7z and as well with the svcpack_1400.zip in the srvpack directory and still received the same error right at the beginning of the install: An unknown error occurred with your Bluetooth Software license. [1]
Any of you have an idea of what this means? BTW, I check also with the Widcomm 5.1.0.1100 set and same result. Thanks.
First, I would like to thank the various people who have generously posted links and instructions to which helped me get my bluetooth working. I spent probably 24 hours over the last week and half searching everywhere to no avail until I discovered this site. Its amazing that companies can sell products that either don't function properly or are incompatible.
That said, I have it working fully with no "bluetooth connectivity" problems but now widows (XP Home SP2) hangs/freezes during shutdown at the point after "Saving Your Settings" when it says "Windows is Shutting Down". I have isolated that it is the bluetooth widcomm driver holding it up by uninstalling it and so forth but don't how I could try to fix it. I've searched around but haven't seen anything usefull yet. Any ideas? I would greatly appreciate it.
My system specs are:
Dell Inspiron 9200
Pentium M 1.6Ghz/1.25 GB RAM
XP Home SP2
Dell Truemobile 350 Internal Bluetooth Card
Widcomm 5.0.1.1400 Driver
Thanks In Advance
Nevermind, after trying .1700, .1700a (which allowed to shutdown but couldn't connect) .2500 & .2800 worked but I had no taskbar power options. Went back to .1100, works great. Thanks again to all the posters.
Could someone please please please republish the BTW5.0.1.1400.rar file ?!?!?
Great many thanks
wolfsbane2k
08-30-2006, 13:30
Hi guys, i have created this unbranded version of 5.0.1.1400. It's not branded to ANYCOM anymore (like .1200 was). It has a modified inf so works with all dongles that worked with .1200. And pre-patched so no need for the patcher or going to safe mode. just uninstall your existing software if any, reboot then install. after that update the drivers in device manager with the ones from the rar file. It's works great for me, i tested it with Nokia N70, bluetooth mouse & motorola hs810 headset. I think all the services are there but not sure if they are different than what was originally with the anycom branded version, can someone check for that?
thought someone would like an unbranded version.
http://rapidshare.de/files/18683118/BTW5.0.1.1400.rar.html
You sir, are a star!
I had been spend 3 hours trying to get this lot working - until i found this batch ( CSR HCI 1.1 chipset - MSI Bluetoes)
Ran and installed without any issues what so ever - thank you!
Wolfsbane2k
I need some help. Before i can even install the program, i get the error
"An unknown error occured with your bluetooth license [1]"
After this error, the program closes down and dosent let me install it. Can anyone please help me out. Its driving me mad! I have tried it with all sorts of different WIDCOMM drivers and stacks, but its the same thing over and over again.
Thank you!!!!!!!!:confused: :confused: :confused:
tigerlan
08-30-2006, 16:09
Could someone please please please republish the BTW5.0.1.1400.rar file ?!?!?
Great many thanks
Here it is
http://www.filesend.net/download.php?f=95c02529d40f76602443a572aeb3fa09
First of all, thank you to Adi for the post. It works great!
I tried this several ways before getting rid of the nag screen. On the 5th try, there has been no nag screen for over 48 hours. My recommendation follows. YMMV
1. Uninstall any previous installations
2. Download the full 5.0.1.1400 (not the pre-patched version)
3. Download the V2 patcher
4. Replace the btwusb.inf with the one from 5.0.1.1200 or modify yourself to include the PID/VID for your device
5. Do not replace the license.dat
6. Install 5.0.1.1400
7. Reboot in safe mode
8. Run the patcher
9. Reboot in normal mode
10. Insert your device, and when prompted, point the install hardware to the bin folder that contains the btwusb.inf
Good luck!
Hey,
I used your instructions to install my ISSC USB Device to my laptop. However, i when i try and add a new device, it tells me that there is no hardware installed.
When i first pluged in the Bluetooth dongle, i selected the ISSC driver from the long list. Should i have selected something else?
Any help from anyone would be greately appreciated!
Thank you in advanced!
After few days of trying to make my pulsar 590A work with my belkin dongle in high quality audio stream I finally found your forum and got your package. After an update of the inf file, I got it connected !!! Thank you very much !!!!!
I also have a pulsar 590 together with a belkin dongle. Audio stream is working but it also worked with belkins original drivers. I want to use my headset for skype but the microphone dont work. I have tried all audio sorces possible but nothing works. Anyone who knows how to solve this problem?
thanosied
09-27-2006, 20:29
I have a serious issue: when I install the drivers, the bluetooth devices show up, but the bluetooth radios doesn't under device manager. HELP!!! I have no idea what to do. I have tried uninstalling and reinstalling to no end or avail. I have windows xp media center running on my hp pavilion m7287c & belkin f8t001 ver 211 bt dongle. Whatever will i do? ;)
tigerlan
09-28-2006, 02:17
I have a serious issue: when I install the drivers, the bluetooth devices show up, but the bluetooth radios doesn't under device manager. HELP!!! I have no idea what to do. I have tried uninstalling and reinstalling to no end or avail. I have windows xp media center running on my hp pavilion m7287c & belkin f8t001 ver 211 bt dongle. Whatever will i do? ;)
Hi,
Have you deleted all bt*.dll before a new install? Pls refer to my earlier post about installing Zonly's package and all the required steps. If you did all the described steps, then I hope other will be able to help you further.
Sorry :confused:
Where exactly do you put in the VID/PID within the btwsub.inf file? Do you replace all instances of the VID/PID with the one from before I started this whole process?
tigerlan
09-29-2006, 00:42
Where exactly do you put in the VID/PID within the btwsub.inf file? Do you replace all instances of the VID/PID with the one from before I started this whole process?
Please check the last post on page 2 of this thread, the reply from int03h (http://forum.gsmhosting.com/vbb/member.php?u=42973) about how to check your specific VID/PID.
But I believe that if you use Zonly's version (page 5 of this thread, first post) you shouldn't need to play with modifying the btwsub.inf because he/she has already included every hardware to date.
rleonardi
05-08-2007, 18:10
Hi guys, i have created this unbranded version of 5.0.1.1400. It's not branded to ANYCOM anymore (like .1200 was). It has a modified inf so works with all dongles that worked with .1200. And pre-patched so no need for the patcher or going to safe mode. just uninstall your existing software if any, reboot then install. after that update the drivers in device manager with the ones from the rar file. It's works great for me, i tested it with Nokia N70, bluetooth mouse & motorola hs810 headset. I think all the services are there but not sure if they are different than what was originally with the anycom branded version, can someone check for that?
thought someone would like an unbranded version.
http://rapidshare.de/files/18683118/BTW5.0.1.1400.rar.html
Hi, I know it's a bit late for that, but could anyone wich still has it, upload this version to me? :D
so is there a final solution to stop the annoying ANYCOM USB pop up appearing every few minutes?
Hello everyone,
I have managed to obtain a heavily customised version of Widcomm 5.0.1.1400 from ANYCOM. The reason i mention it's heavilly customised, it's cause the btwusb.inf file included only has support for their USB dongles. Everything else has been stripped out so in order for it to work with other dongles, just replace the VID and PID in there with the one from your own dongle and it should then work. I might also suggest to just use the btwusb.inf files from the previous .1200 release but i don't guarantee it will work ok..
I have tested the license.dat that Phantasm had made for the .1200 version and it does not work. It complains that we can't use a licence file that was designed for a previous version of Widcomm so unless he can make us another version for .1400, WinXP x86 64bit users are out of luck :(
I then used the Widcomm V2 patcher that is mentioned in one of the previous threads and to my surprise, IT WORKS ! There is just one slight problem in that the little bluetooth icon that normally apears in the system tray is nowhere to be found. However, if one goes into "my bluetooth places" everything's there and working fine.
Why i think this release is important : beacause it seems it's the only one that works with the new Plantronics 590 Pulsar headset as described here :
http://bluetoothbob.atspace.com/Pulsar590PlantronicsHeadsetWithAnycom.htm
Here are the official fixes compared to previous 4.0.1.xxxx version as posted on the ANYCOM support forums :
- Support for A2DP Profile as SNK
- Support for A2DP Profile on Windows 98SE/ME
- Support for Basic Printing Profile
- Support for Windows XP x64 edition
- Local PC can now be used as Bluetooth print server
- Enhanced security
Oh, and here's the link :
http://www.megaupload.com/?d=Z2KWUOFF
Enjoy :)
Adi
I came back here to inform that this exact post has my Jabra A320s bluetooth adapter working in Vista Business.
I downloaded the exact version mentioned in the link above. Installed it. Did NOT do the patcher as for some reason, all worked well with the 5.0.1.1400 drivers.
Pretty interesting (lame) to me that Jabra doesn't have vista support on their site for this adaptor.
So... thanks adisor19 for taking the time to post. And for all other Vista users with Jabra adaptor, here's one confirmed working solution.
Hello,
I 've done step by step what phantasm4489 adviced. And i've got the error message : this installation package is not taken in charge by this kind of processor. My PC is a dell latitude D620. Could someone please help me ?
In fact, i have no more this problem. But i have another question. If the bluetooth module of my PC doesn't support the A2DP profil, it's not possible to upgrade the module instead of using a bluetooth USB key ?
Many thanks
its highly unlikely that the d620 built-in bluetooth module would not support a2dp at the hci hardware version level. It is a relatively new machine and if it is broadcom bases then version up to 5.1.0.1300 should load if configured well. It must only be the case of bluetooth stack support (which I think dell uses the toshiba stack but not sure)..
i am trieing to install my aiptek bt dongle since a few weeks without getting it working.
i tried many diffrent drivers and followed many howtos from this forum but all with the same result.
the device gets installed and has the name i entert in the .ini file. but the icon in the device manager still has this yellow "!". in the details of the device manager i can see a massage like "could not start device" (i have a german system so i don't know the exact message).
all com-ports and bt-audio and this things are installed correctly. the bt-icon in the system tray stays always blue and red.
i tried to update my xp to sp3. but still the same result
please help me.