View Full Version : Z140 - always communication error
freewaycomms
03-03-2006, 21:17
Hi there
First use on the samsung and it was a z140 - no matter what i did i only got Communications error
Tried different cables etc but no luck
can someone provide a step by step so i can see what im doing wrong? should i be using com or usb etc etc etc
cheers
FWC
davor2003
03-03-2006, 23:27
Hi there
First use on the samsung and it was a z140 - no matter what i did i only got Communications error
Tried different cables etc but no luck
can someone provide a step by step so i can see what im doing wrong? should i be using com or usb etc etc etc
cheers
FWC
samsung Z series communications error select com1 unlock %100
Hi there
First use on the samsung and it was a z140 - no matter what i did i only got Communications error
Tried different cables etc but no luck
can someone provide a step by step so i can see what im doing wrong? should i be using com or usb etc etc etc
cheers
FWC
if you are using USB cable:
go to START/SETTINGS/CONTROL PANEL/PHONE AND MODEM OPTIONS
double click on MODEM OPTIONS
click on MODEMS.
in that tab you have all instaled modems.
you must REMOVE all SAMSUNG CDMA #2, #3, #.... from there and all MOTOROLA MODEM #1, #2, #.....
unplug the SAMSUNG phone from usb cable and plug it again.
windows will ask for drivers.
instal the drivers.
after that go to MY COMPUTER, right click on it, PROPERTIES/HARDWARE/DEVICE MANAGER.
here go to MODEMS and there you will see SAMSUNG CDMA as modem.
double click on it, select second tab MODEM and you will see the come port where the phone is instaled.
select it on the software and enjoy.
br
Hi there
First use on the samsung and it was a z140 - no matter what i did i only got Communications error
Tried different cables etc but no luck
can someone provide a step by step so i can see what im doing wrong? should i be using com or usb etc etc etc
cheers
FWC
First - use USB cable
Seccond - AFTER you connect phone to cable and computer you'll see a new
port detected by Samsung program. Select this new port and make your job ;)
Mobile-madman
03-07-2006, 10:13
Many thanks this solved all my problems!!
cvp-handy-tuning.da.ru
03-07-2006, 13:21
its possible use USB cable to flash Firmware ? i have a e730!