me75 v19 problems after simlock

[xDAN]

hi I was try to unlock with 7.10 and 6.86

Phone model changed to: C65/C6V/C6C/C66/CT66
Please connect the needle to Test-point
Starting Unlock Procedure ...

and stoped

Phone model changed to: CX75
Please connect the needle to Test-point
Starting Unlock Procedure ...
OTP IMEI: 1515151515151515151515151515
EEPROM IMEI: 357985002968767
Writing Simlock ...
Unlock Procedure Stopped
Timeout Raised
Please ,Try Again!

Please connect the needle to Test-point
Starting Unlock Procedure ...
OTP IMEI: 1515151515151515151515151515
EEPROM IMEI: 357985002968767
Writing Simlock ...
Unlock Procedure Stopped
Timeout Raised
Please ,Try Again!


And now phone is still locked, powering on without simcard, but when i insert simcard phone hang up, powering off after 3-5 seconds....

[artusius]

hi I was try to unlock with 7.10 and 6.86

Phone model changed to: C65/C6V/C6C/C66/CT66
Please connect the needle to Test-point
Starting Unlock Procedure ...

and stoped

Phone model changed to: CX75
Please connect the needle to Test-point
Starting Unlock Procedure ...
OTP IMEI: 1515151515151515151515151515
EEPROM IMEI: 357985002968767
Writing Simlock ...
Unlock Procedure Stopped
Timeout Raised
Please ,Try Again!

Please connect the needle to Test-point
Starting Unlock Procedure ...
OTP IMEI: 1515151515151515151515151515
EEPROM IMEI: 357985002968767
Writing Simlock ...
Unlock Procedure Stopped
Timeout Raised
Please ,Try Again!


And now phone is still locked, powering on without simcard, but when i insert simcard phone hang up, powering off after 3-5 seconds....

Martech team works on this problem.
Now try fullflash to phone.
At this moment no solutions for ME75 unlock...

[xDAN]

After 24 hours phone doesn't power on anymore :| If I trying to flash with file ME75_Intel_V19_lg4_full as me75(7.10) - after releasing testpoin - "Read beyond of file." and if i trying one more time "Stack overflow." and next time error, invalid operation...

Same with 686 with x65 section.

No solution right now ?

B.R.

[artusius]

After 24 hours phone doesn't power on anymore :| If I trying to flash with file ME75_Intel_V19_lg4_full as me75(7.10) - after releasing testpoin - "Read beyond of file." and if i trying one more time "Stack overflow." and next time error, invalid operation...

Same with 686 with x65 section.

No solution right now ?

B.R.
whos software you using?

[hallo]

..trouble with Me75 but sucssefuly done with Papuas SW and BootPass by Caos....btw...U shoode try first to use BootPass and than Test Point method.
Whay You did not try to unlock with Me75 chosen? I see You try to with C65 selected...any specific reason for that?:confused:

[cover_one]

tray like that v6.86 as CX75 i have unlocked one like that.

[SST-GSM]

Probably the problem is that the OTP imei is not set!
We shall try with othe Me75 phones with blank OTP IMEI.
You should select ME75 moidel and boot password method.
Detailed description on "Boot Password" method is in our support area.