cl75 restart at siemens logo after flash

[ddhorn]

i got a cl75 and try to change language. i flash the phone with fireware, lang pack and map file and all flash went ok. but after that phone always restart at siemens logo. i checked the ffs erase. also flashed eprom, still same. any idea to fix this.

BR

[InfinitySupport]

pls, log file to check, can't give any advice before I see Log file. you can try to use this: http://forum.gsmhosting.com/vbb/showthread.php?t=248879

[ddhorn]

hi, this is the log of flash fireware, map and lang pack
Current device: CL75
Loading...
CL75_100D_Main.21M.bin Loaded
Loading...
CL75_Map_DF-M22.10.21F.bin Loaded
Loading...
CL75_100_LP08L2707_Cn.21P.bin Loaded
COM1 selected
Device: CL75
Checking data, wait...
Action: Flash write
"SmartWrite" enabled
Write: Firmware
Write: MAP/Customization
Write: Language Pack
Boot...
Press and HOLD Power button !
Connecting, wait...
Release Power button !
FLASH: 01227E22202200
FLASH: 98E59F00000000
Boot Done
Set baud...
Set baud Done
Check Flash...
Check Flash Done
Check space...
Check space Done
Check parameters...
Check parameters Done
Erasing...
Erasing Done
Writing...
Write: Firmware
Write: MAP/Customization
Write: Language Pack
Writing Done
Finished
Remove/Install battery now !
Time used: 1796 sec

then i reset the phone:

COM1 selected
Device: CL75
Checking data, wait...
Action: Reset
Boot...
Press and HOLD Power button !
Connecting, wait...
Release Power button !
FLASH: 01227E22202200
FLASH: 98E59F00000000
Boot Done
Set baud...
Set baud Done
Check Flash...
Check Flash Done
Check space...
Check space Done
Check parameters...
Check parameters Done
Erasing...
Erasing Done
Writing...
Writing Done
Finished
Remove/Install battery now !
Time used: 18 sec

and then i write eprom:

Current device: Siemens CL75
Loading...
CL75_Repair_eeprom01.21E.bin Loaded
COM1 selected
Device: Siemens CL75
Checking data, wait...
Action: Flash write
"SmartWrite" enabled
Skip: Firmware
Skip: Map/Customization
Skip: Language Pack
Write: Eeprom
Boot...
Press and HOLD Power button !
Connecting, wait...
Release Power button !
Flash: 01227E22202200
Flash: 98E59F00000000
Boot Done
Set baud...
115200
Set baud Done
Check Flash...
Check Flash Done
Check space...
Check space Done
Check parameters...
Check parameters Done
Erasing...
Erasing Done
Writing...
Write: Eeprom
Writing Done
Finished
Remove/Install battery now !
Time used: 38 sec

[CLIFFORD25502]

do u check ver before flashing or make backup?

[nobal1976]

i have same problam in cl75 hang on startup flash with infinty with 3 file and eprom but same need solotion urgent

[InfinitySupport]

Flash 3 parts together (main +lp + map) according to FlashFileDescription manual fromn support area.
Make "reset".
Check hardware.

[nobal1976]

hardware is ok set is brand new but all option in infinity i have apply but same

[symbiah]

help , what is the difference between CL75 and CL75 POPPY

[symbiah]

same hapens to me

i need to put in that fu.... phone original contents
flash it with infinity - CONTENTS WAS THERE
after that i try to open xxxxx.GIF - unsuported fail format
flash it again - no contents in it
take a puicture - all fine , there is my photo and it is opened fine
but i need contents !!!
download CL75 update from original BENQ-SIEMENS site - two versions COM and USB

start to flash with COM , error on 80% , than on 20% , but phone can SWITCH ON normally , i didnt look for contents

than flash it via USB with ORIGINAL UPDATER , all past fine but when i power on phone , only LOGO and thats it , .......

BELEIVE ME i try everything after that with INFINITY .... NO SUCCESS

i need HEEELP

now i see that this is POPPY , but i flash it with regular CL75 SW
there is no SW for POPPY in the BENQ - SIEMENS SUPPORT

what to do ????


I NEED HEEEEEELP

[InfinitySupport]

Hi,
What was phone original state ?
What was the reason you flashed it first time ?

try to flash different set of files. It's important to write 3 files together: main + lp + map

[symbiah]

ORIGINAL STATE - OK but without contents in user memory
all folders empty , no images , no sounds , customer want original
1.FLASH with infinity , contents was there but when open original ***.GIF
give "UNSUPORTED FAIL FORMAT"
2.FLASH , FLASH , REPAIR EEPROM , FFS FORMAT , all ... and nothing ... all folders remain empty , but HW flash IC i thing OK , coz when i take a picture with camera , *****.JPG fail was there and opening fine

3.I deside to flash with original flasher from support http://www.benq-siemens.com/cds/frontdoor/0,2241,hq_en_0_130289_0_xcs%253A130989_xcp%253A130 802,00.html
first flash with serial cabel , give me error , i think battery was low

4.than i change the battery and start with USB downloader
all start fine , there is message "need to reformat file system, all contents will lost" something like this , i said "OK" and all pass fine " SUCCESSFULL"
but the phone power and remain at startup logo

AND WITH THIS START ALL MY TROUBLES .....

[nabilrifi]

any sulistion i flached with all version not seccse helppppppppppppp

[InfinitySupport]

@nabilrifi
could you, please, explain what is the problem ?

[nabilrifi]

1 i unlock cl 75 aftar that no network
2 i have same problem last month but after flash is ok
this taim after flash restart sory for bad english

[InfinityHelp]

hello!

have you tried what we adviced above?
Flash 3 parts together (main +lp + map) according to FlashFileDescription manual fromn support area. This is important because flash files must be correspondent to each other!
Make "reset".

[nabilrifi]

problem solved
with map :CL75_Map_s124-M24.10_234-30.21F.bin
thnks infinity