PDA

View Full Version : problem with setool and k608i red49

kemel
03-23-2006, 15:13
i received that phone dead after unlocking i tried unlockrepair anf flashing but i have only this :
GUI v0.91380013/UNI
Card serial:00004950
Loaded 49 flash descriptors
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800
OTP status:0 locked:1 CID:49 PAF:1 IMEI:35684100310142 CERT:RED

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS 'TESTPOINT OK'

Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800

then nothing!!!!!
what to do

br
.::Zafar Communication::.
03-23-2006, 15:22
i received that phone dead after unlocking i tried unlockrepair anf flashing but i have only this :
GUI v0.91380013/UNI
Card serial:00004950
Loaded 49 flash descriptors
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800
OTP status:0 locked:1 CID:49 PAF:1 IMEI:35684100310142 CERT:RED

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS 'TESTPOINT OK'

Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800

then nothing!!!!!
what to do

br


i did but nothing all process complete but set become dead then again alive with cruiser with test point

dear dont try if your phone is still alive

thanks & regards


Zafar Janjua
blaiseid
03-23-2006, 15:27
Please, no SETOOL SUPPORT here.Free support is on Mo.b.il.e-.fi les
infogsm
03-23-2006, 16:45
mob***file is closed those days!!

br
midou01
03-23-2006, 16:50
i received that phone dead after unlocking i tried unlockrepair anf flashing but i have only this :
GUI v0.91380013/UNI
Card serial:00004950
Loaded 49 flash descriptors
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800
OTP status:0 locked:1 CID:49 PAF:1 IMEI:35684100310142 CERT:RED

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS 'TESTPOINT OK'

Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800

then nothing!!!!!
what to do

br

You have to do TP methode with setool in this case and follow these steps:
1. flash main+fs (not check complete) (use K600 flash=K608i)
2. write gdfs from frec\k600gdfs.bin (check format)
3. unlock.
4. set RED49 in "change cid" and write db2000erom (eroms directory)
5. now, press "clear names" , check complete and press flash.
kemel
03-23-2006, 19:46
trying with TP methode :
ATTACH TESTPOINT NOW, THEN PRESS TESTPOINT OK
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS INVISIBLE (00000000)
NO valid FLASH CID detected (00)
Speed:460800
err: 45
loader prologue returns invalid status
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:4 secs.

can't flash or repair!!!
help
br
mihy
03-23-2006, 19:52
trying with TP methode :
ATTACH TESTPOINT NOW, THEN PRESS TESTPOINT OK
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS INVISIBLE (00000000)
NO valid FLASH CID detected (00)
Speed:460800
err: 45
loader prologue returns invalid status
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:4 secs.

can't flash or repair!!!
help
br
Just use right testpoint.
AndreS
03-23-2006, 20:23
i received that phone dead after unlocking i tried unlockrepair anf flashing but i have only this :
GUI v0.91380013/UNI
Card serial:00004950
Loaded 49 flash descriptors
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800
OTP status:0 locked:1 CID:49 PAF:1 IMEI:35684100310142 CERT:RED

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS 'TESTPOINT OK'

Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800

then nothing!!!!!
what to do

br

it means that setool non TP solution is with TP :D

where are you mobileland to make support for your customer :D


back to kemel

first search on the forum for K608i testpoint.
open the phone
start USB SMART or CRUISER.
flash your phone
make complete phone.
that's all.


br
infogsm
03-24-2006, 13:36
trying with TP methode :
ATTACH TESTPOINT NOW, THEN PRESS TESTPOINT OK
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS INVISIBLE (00000000)
NO valid FLASH CID detected (00)
Speed:460800
err: 45
loader prologue returns invalid status
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:4 secs.

can't flash or repair!!!
help
br

the TP used by kemel is good while the phone is detected as invisible !!!
the problem is not there!!

br
infogsm
03-25-2006, 01:56
it means that setool non TP solution is with TP :D

where are you mobileland to make support for your customer :D



br
yeah where is setool support !!! even their forum is closed:D

br
.::Unlocker.::
03-25-2006, 05:56
their forum will be up soon.
blaiseid
03-25-2006, 18:50
You can ACCESS the mo bi. l..e .f -i le site FROM www.setool.net and click FORUM
mr.nour
04-08-2008, 23:13
flash k600 or k608i

1- go to this website and download Main & Fs for k608 /http://se-firmware.extra.hu/?path=./Firmware/K600i/CID49/R2T002/


good lucky
aly2ko3
04-08-2008, 23:31
use vodka clip and press unlock or use usb smart ur phone will be alive again