View Full Version : 15 in one cable, problems unlock z500
hanebatser
03-26-2006, 16:20
i ahve the 15 in one cable, all operations work except z500 unlock!!
do i need a special driver? and which one, or can i use the cable that came with?
imused the z140 and z130 connector for it!
greetings hanebatser
jesusangel
03-26-2006, 20:07
i ahve the 15 in one cable, all operations work except z500 unlock!!
do i need a special driver? and which one, or can i use the cable that came with?
imused the z140 and z130 connector for it!
greetings hanebatser
Use the cable included with it.
Regards
hanebatser
03-28-2006, 17:48
Do i need to connect the 2-3 pins together of the com port when i use original cable!!
Why my 15 in one cable not works with z500 but it works with the other models (not umts).
maybe other drivers?
greetings hanebatser
jesusangel
03-28-2006, 18:16
Do i need to connect the 2-3 pins together of the com port when i use original cable!!
Why my 15 in one cable not works with z500 but it works with the other models (not umts).
maybe other drivers?
greetings hanebatser
About connect pins 2 and 3 it is only for winimei soft. Don need to do it with Usb-Smart
About cable I don't know how can't work, yes can be drivers problem, but this cable only work with this models
http://pinouts.ru/data/samsung_z130_pinout.shtml
If you can't unlock it maybe is a recent version and must downgrada before reading codes.
Regards
please post drivers here :)
where can i buy all cables set needed for usb-smart samsung operation?????
.:GSM International:.
04-10-2006, 13:56
unlock is only by usb i think
Inovator
04-10-2006, 15:52
unlock is only by usb i think
I think COM for unlock, and USB for flash
z500 will unlock only by usb cable......but u must short the pin 2 and 3 of seraial port for unlocking operatoin
mikiidan
04-11-2006, 09:27
only usb cable works....tested by me
hanebatser
04-11-2006, 11:40
SO i only need original usb cable i not need to short the pin 2 and 3 of serial port?
greetings hanebatser
hanebatser
04-11-2006, 15:11
SO i only need original usb cable i not need to short the pin 2 and 3 of serial port?
greetings hanebatser
it worked!!
thanx
Hanebatser
eureka8888
04-19-2006, 10:22
did you conect pins 2 and 3?
What about my Z140 is not detected by computer?
Cable working couse earlier i unlocked ZV10.
And why com short 2-3 when using USB communicatios?
jesusangel
04-19-2006, 18:33
What about my Z140 is not detected by computer?
Cable working couse earlier i unlocked ZV10.
And why com short 2-3 when using USB communicatios?
Short com pins 2 and 3 is only needed to use Winimei soft.
About not detected Z140 if cable works and drivers are instaled only rest phone problem, phone connector or something else.
Regards
So winimei communicating by COM port ?
About phone - it is new,plug ideal.
It is some problem if correct sim card inserted or not?
gsmbase.de
04-22-2006, 08:29
Or use a E720 USB Data Cable for Unlock Z500, Tested by me yesterday ;)
BR Piotrek