How To Unlock Sl75 - GSM-Forum

AbdulKadir · 03-30-2006, 12:08

Hello,

Can somebody help me and advise on how to unlock the SL75 on martech.

I have tried but gives error.

zinoubinabil · 03-30-2006, 17:41

Quote:

Originally Posted by AbdulKadir

Hello,

Can somebody help me and advise on how to unlock the SL75 on martech.

I have tried but gives error.

read this manual

Manual:

1. Download midlet file:
x75reader_for_Martech.zip

2. Unpack file (you'll get "x75reader" folder with 2 files inside)

3. Go to www.my-siemens.com or www.siemens-mobile.com , download MPM software, conect phone with MPM (phone explorator mode).
You can use com cable, usb cable, IRDA (data cable).

4. Copy folder "x75reader" (full folder) to phone into "Applications" folder

5. Enter phone menu (for example using function "Simulate SIM Card")

6. Connect phone with box via data cable (modified cable)

7. Run SIEM Service Tools program (v11.4 or higher), and press "Generate BOOT_PASS (from java midlet)" function (in "Additional" menu)

8. Run midlet (from menu: Applications) - run file x75reader.jar

Accept - that you are sharing COM port on phone, etc...

On phone LCD you'll see info "Please wait..." , after 10sec SIEM Service Tools program will start generating BOOT_PASS.

9. Connect phone (phone should be turned off) to box/clip and chose "Direct mode"

10. Press for example option "Read Phone" - There will be window "DIRECT_MODE Dialog"
- chose "New DIRECT_MODE method (BOOT_PASS file)"
- click "Open BOOT_PASS file"
- select file generated BOOT-PASS on Your HDD

nvad · 05-31-2006, 08:12

hi
sultion is tested 100% working?????

zinoubinabil · 05-31-2006, 08:34

hi;
yes this solution 100% tested & working
without problem

with respect

vandal · 06-22-2006, 20:16

PLEASE WHERE DO I ET THIS midlet file:
x75reader_for_Martech.zip IS URGENT PLEASE

Stylo_GSM · 06-23-2006, 17:45

Quote:

Originally Posted by vandal

PLEASE WHERE DO I ET THIS midlet file:
x75reader_for_Martech.zip IS URGENT PLEASE

attachment...................

vandal · 06-24-2006, 21:53

@ Stylo Communications thanks mate

cartuchobahia · 07-06-2006, 17:34

anyone got the scheme of this modified cable? 10k resistor, rj45 conector, c55 cable...? someone tell me that with this components he made a cable to do de generate booth pass directly with martech box

v11 · 07-08-2006, 07:35

how to unlock SL75 with MARTECH typ new ... recent ?
Please...
Thx.

Stylo_GSM · 07-08-2006, 13:33

pls read the post made by zinoubinabil

cartuchobahia · 07-08-2006, 13:38

Martech solution, get ready to make your cable!

you'll need: 1 RJ45 conector
2 resistors, of 10K or 15K
1 siemens cable (MC60, C55)

in RJ45, conect this cables (you're the martech, and the conector is coming to you, with the conectors on the top. that's the view of the cable)

1) green 2)white 4)yellow 5)blue 6)black 8)red
on the other side, you got the 12 pins conector. This is the order:
2)white 3)blue 4)yellow 5)resistor 7)resistor
Put an extra cable as a bridge to conect pin 2 (white cable) to the resistors.
Now you can use the method from this thread directly with martech:
1)simulate sim
2)put the folder on the cellphone
3)Conect cellphone to martech with your new cable
4)go to extra and press "generate booth pass (java midlet)
5)execute the program on the cellphone, ok in all the options
6) martech will create the boothpass and ask you to save it. Turn off the phone
7)now, with regular martech cable, select direct method, unlock, and select in the new window the booth pass file.
8)press "go"
9) enjoy it
Many many thanks to my local Sensei, Luciano, who teached me the scheme of the cable!

v11 · 07-09-2006, 13:27

Please solve my problem...

How to enter in Menu Phone , for Simulate sim card...? Siemens service tools no work for sl75 model...
Please...
Thx.

v11 · 07-09-2006, 13:43

Please there no work with - sl75 versoin 24...
please solution...
No work with "simulate sim card" ... no communicate with cable qualified.

cartuchobahia · 07-10-2006, 23:29

first, you conect in martech with regular cable, simulate sim, enter the files in the cellphone by usb cable or bluetooth, conect to martech with modified cable and then make the "magic" with generate booth pass. After it was generated and saved in the HD, change again for regular martech cable, and then you go to unlock.
All had been done with martech and any program to upload files into siemens (that normally comes with the usb cable)

v11 · 07-11-2006, 10:05

Quote:

Originally Posted by cartuchobahia

first, you conect in martech with regular cable, simulate sim, enter the files in the cellphone by usb cable or bluetooth, conect to martech with modified cable and then make the "magic" with generate booth pass. After it was generated and saved in the HD, change again for regular martech cable, and then you go to unlock.
All had been done with martech and any program to upload files into siemens (that normally comes with the usb cable)

Thanks cartuchobahia ....

Super...

03-30-2006, 12:08	#1 (permalink)
AbdulKadir Freak Poster Join Date: Jul 2005 Age: 74 Posts: 349 Member: 163019 Status: Offline Thanks Meter: 9	How To Unlock Sl75 Hello, Can somebody help me and advise on how to unlock the SL75 on martech. I have tried but gives error.

07-08-2006, 07:35	#9 (permalink)
v11 No Life Poster Join Date: Dec 2005 Location: RIFF-XILINX Posts: 993 Member: 214827 Status: Offline Sonork: 100.1597158 Thanks Meter: 59	how to unlock SL75 with MARTECH typ new ... recent ? Please... Thx. Last edited by v11; 07-08-2006 at 08:18.

07-08-2006, 13:38	#11 (permalink)
cartuchobahia No Life Poster Join Date: Aug 2005 Location: Salvador - Bahia - Brazil Age: 48 Posts: 840 Member: 172567 Status: Offline Thanks Meter: 90	modified cable for martech! Martech solution, get ready to make your cable! you'll need: 1 RJ45 conector 2 resistors, of 10K or 15K 1 siemens cable (MC60, C55) in RJ45, conect this cables (you're the martech, and the conector is coming to you, with the conectors on the top. that's the view of the cable) 1) green 2)white 4)yellow 5)blue 6)black 8)red on the other side, you got the 12 pins conector. This is the order: 2)white 3)blue 4)yellow 5)resistor 7)resistor Put an extra cable as a bridge to conect pin 2 (white cable) to the resistors. Now you can use the method from this thread directly with martech: 1)simulate sim 2)put the folder on the cellphone 3)Conect cellphone to martech with your new cable 4)go to extra and press "generate booth pass (java midlet) 5)execute the program on the cellphone, ok in all the options 6) martech will create the boothpass and ask you to save it. Turn off the phone 7)now, with regular martech cable, select direct method, unlock, and select in the new window the booth pass file. 8)press "go" 9) enjoy it Many many thanks to my local Sensei, Luciano, who teached me the scheme of the cable!

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
HOW TO unlock SE v600i ??please help	xiongfuchen	SETool2	15	05-21-2013 08:10
how to unlock iphone 3.0	louisgsm	iPhone 2 / iPhone 3G / iPhone 3GS	10	03-29-2010 15:53
to all experts how to unlock sl75 with mt with out testpoint	day@walker	MT-BOX	1	05-24-2008 18:13
how to unlock simense sl75 . . .	harish35200	S-Gold Based Phones	1	02-11-2007 07:51
how to unlock sl75????	Siemens man	SST-Dongle	3	08-25-2006 07:33

05-31-2006, 08:12	#3 (permalink)
nvad Freak Poster Join Date: Jul 2005 Location: ......... Posts: 308 Member: 165303 Status: Offline Sonork: 100.1580123 Thanks Meter: 57	hi sultion is tested 100% working?????

05-31-2006, 08:34	#4 (permalink)
zinoubinabil Product Supporter Join Date: Sep 2004 Location: In the right way Posts: 2,748 Member: 84268 Status: Offline Sonork: 100.114149 Thanks Meter: 2,569	hi; yes this solution 100% tested & working without problem with respect

06-22-2006, 20:16	#5 (permalink)
vandal No Life Poster Join Date: Dec 2003 Location: UNSHAKEABLE LIFE Posts: 754 Member: 45656 Status: Offline Thanks Meter: 31	PLEASE WHERE DO I ET THIS midlet file: x75reader_for_Martech.zip IS URGENT PLEASE

06-24-2006, 21:53	#7 (permalink)
vandal No Life Poster Join Date: Dec 2003 Location: UNSHAKEABLE LIFE Posts: 754 Member: 45656 Status: Offline Thanks Meter: 31	@ Stylo Communications thanks mate

07-06-2006, 17:34	#8 (permalink)
cartuchobahia No Life Poster Join Date: Aug 2005 Location: Salvador - Bahia - Brazil Age: 48 Posts: 840 Member: 172567 Status: Offline Thanks Meter: 90	anyone got the scheme of this modified cable? 10k resistor, rj45 conector, c55 cable...? someone tell me that with this components he made a cable to do de generate booth pass directly with martech box

07-08-2006, 13:33	#10 (permalink)
Stylo_GSM No Life Poster Join Date: Sep 2005 Location: UK, London Age: 35 Posts: 2,236 Member: 177235 Status: Offline Sonork: 111568 Thanks Meter: 138	pls read the post made by zinoubinabil

07-09-2006, 13:27	#12 (permalink)
v11 No Life Poster Join Date: Dec 2005 Location: RIFF-XILINX Posts: 993 Member: 214827 Status: Offline Sonork: 100.1597158 Thanks Meter: 59	Please solve my problem... How to enter in Menu Phone , for Simulate sim card...? Siemens service tools no work for sl75 model... Please... Thx.

07-10-2006, 23:29	#14 (permalink)
cartuchobahia No Life Poster Join Date: Aug 2005 Location: Salvador - Bahia - Brazil Age: 48 Posts: 840 Member: 172567 Status: Offline Thanks Meter: 90	first, you conect in martech with regular cable, simulate sim, enter the files in the cellphone by usb cable or bluetooth, conect to martech with modified cable and then make the "magic" with generate booth pass. After it was generated and saved in the HD, change again for regular martech cable, and then you go to unlock. All had been done with martech and any program to upload files into siemens (that normally comes with the usb cable)