View Full Version : sharp903sh cid 73 after flash with usb smaert now cant booot????
can any body help me with my sharp903sh flash with usb smart now cant power on and not boooting
wot is problm??
need help
thankx
falak
Siemens man
04-03-2006, 21:35
you phone dead forever. many guys same problem. read forum. i have this problem too...........................
Kevbodian
04-11-2006, 23:28
you phone dead forever. many guys same problem. read forum. i have this problem too...........................
actually.
phone may not be dead. i even heard that HWK can fix it.
but using usb smart:
ok. if you have a phone that wont work with the tool anymore (tool doesnt recognize it), follow this steps:
1. insert battery
2. plug in 4in1 cable (autopower cable or using 3, 3.7, 4.2V by alligator)
3. do selected jobs
4. it will say "press power on shortly"
5. insert POWER CABLE
6. then do flash as needed.
However, after flashing then unlocking with the same procedure, the phone will not boot.
Kashif Khan
04-11-2006, 23:34
MR some time that not detect due to low battery,i checked.
BR
Kashif Khan
Did Everythng But No Way Cant Conect
Siemens man
04-12-2006, 14:06
hi man
thank you for reply mail. i'm try your solution. but no result. usb-smart sharp tool can't detect my phone.
actually.
phone may not be dead. i even heard that HWK can fix it.
but using usb smart:
ok. if you have a phone that wont work with the tool anymore (tool doesnt recognize it), follow this steps:
1. insert battery
2. plug in 4in1 cable (autopower cable or using 3, 3.7, 4.2V by alligator)
3. do selected jobs
4. it will say "press power on shortly"
5. insert POWER CABLE
6. then do flash as needed.
However, after flashing then unlocking with the same procedure, the phone will not boot.
Kevbodian
04-13-2006, 01:46
wow... weird. hmm...
im sure there is a way to fix. just hang on.
Siemens man
04-13-2006, 02:00
please made another solution
wow... weird. hmm...
im sure there is a way to fix. just hang on.
@Falak.bro can post log her.i mean the full opperation of doing 903?
for more power stable? use hwk cable with twister interfce..
Kevbodian
04-13-2006, 23:05
3R,
their phones are not recognized by tool. so most likely the log won't say anything because it is not getting any signal.
great_justice
04-14-2006, 11:56
1. insert battery
2. plug in 4in1 cable (autopower cable or using 3, 3.7, 4.2V by alligator)
3. do selected jobs
4. it will say "press power on shortly"
5. insert POWER CABLE
6. then do flash as needed.
However, after flashing then unlocking with the same procedure, the phone will not boot.
That's exactly my problem. I just tried using an external charger to make sure the battery was full, and it still doesn't work. :( looks like I have to save up another $400
b4 fone is working fine? or what?
Siemens man
04-14-2006, 15:46
hi man
i have same problem. i have safe too up another 300USD
That's exactly my problem. I just tried using an external charger to make sure the battery was full, and it still doesn't work. :( looks like I have to save up another $400
Kevbodian
04-15-2006, 01:13
i havent seen this problem with usbsmart.. but i am positive it is happening.
i saw this problem 1 time with setool.
after flash and unlock, everything completes OK. but when trying to turn on the phone it wont boot.
after this, the phone will not connect to any tool. using setool you can make it connect again by flashing with the battery IN the phone and when it says "press power shortly" insert the charger.
however, after flash and unlock again, phone still doesnt power on.
@Falak.bro can post log her.i mean the full opperation of doing 903?
for more power stable? use hwk cable with twister interfce..
yes i did but now cant booot anymore i dont kno y this happnd
:confused:
be sure that TP is right.now flash it again and follow on screan prcedure!!
be sure that TP is right.now flash it again and follow on screan prcedure!!
but how i flash coz its not booting anymore???
so any oher way to solve this problm?
:confused:
great_justice
04-18-2006, 04:10
but how i flash coz its not booting anymore???
so any oher way to solve this problm?
:confused:
You can flash it by plugging in the charger when it says "Power phone on," But when I did that my phone was still broken.
3R, Would the log file from this flashing be useful?
ll it work??????with this method???
You can flash it by plugging in the charger when it says "Power phone on," But when I did that my phone was still broken.
3R, Would the log file from this flashing be useful?
i managed to flash agin file latest file but cant unlock or power on
can some1 help me 4 this
i flashed using charger without charget it unable to booot
thankx
falak
now its flash and unlock ok but still cant power on ???
any help????
thankx
falak
great_justice
05-04-2006, 01:06
now its flash and unlock ok but still cant power on ???
any help????
thankx
falak
That's exactly my problem. A few other people seem to have the same problem too, but I haven't seen anybody say how to fix it.
Siemens man
05-10-2006, 01:04
hey guys
any one can repair dead 903sh cid73???? no solution exit for repair
thanks a lot