View Full Version : step by step to unlock 903sh here
hi guyssssssssss
who have success to unlock 903sh ?
please explained us step by step here, in order to all people knowing that procedure....
1...
2....
Siemens man
04-05-2006, 17:28
tell me you 903sh soft version and date of produced???? i'm tell you all solution
successfull unlock 903sh 2006 using usb smart
1.DISASSEMLY THE PHONE..
2.SELECT FLASH FILE TO BE NEEDED
3.CLIP THE ALIGATOR CLIP W/ WIRE CONNECTED TO NEEDLE
TO THE GROUND OF THE PHONE..
4.PRESS FLASH NOW CONNECT THE TESTPOINT GENTLY TO AVOID DEAD PHONE HOLD..PRESS TESTPOINT THEN THE SOFTWARE ASK RELEASE THE TESTPOINT..
5. SMILE
6.AFTER FLASHING PRESS THE UNLOCK BUTTON FOLLOW THE INSTRUCTIONS 3 AND 4
7.PHONE UNLOCKED
sanitizer
04-05-2006, 20:46
about "disassemble" hopefully someone will kindly upload a picture ...LoL, since I can't use my brain anymore. :D:D:D
henryk_jr
04-10-2006, 10:11
Hey everyone :)
I own 4 pcs of sharp 903SH, 12/2005 locked with CID73 and all of those phones imei starts with: 358141/00/1******/*. I heard that it is possible to unlock it without using TP. I just need to use november flash file from support section, and upload this file. Is it true?
Regrds
Henry
Kevbodian
04-11-2006, 23:18
Not True. Phone Will Not Boot After.
need confirmation, anyone has succeed unlocking sharp 903sh cid 79 with usb smart??????
Kevbodian
04-12-2006, 13:06
i think you mean CID73. and yes some people have.
ChinaSpace
04-15-2006, 16:45
chinese look here :http://www.gsmcity.cn/read.php?tid=1016&fpage=1
no thanks, i have a solution....
work 100 %
henryk_jr
04-27-2006, 17:04
Hey GIGOLO - can You tell me solution? My 2 phones wont reboot...When I press "power on" button phone boot, but only for 3-5 sec.After that phone automaticly turn off...People who unlocked my phone is still saying that my battery is bad,dead and everything...But I just can`t belive that 2 batteries r dead...something is wrong...Maybe that unlocked it wrong? Is it possible to do something with that? Thanks :)
successfull unlock 903sh 2006 using usb smart
1.DISASSEMLY THE PHONE..
2.SELECT FLASH FILE TO BE NEEDED
3.CLIP THE ALIGATOR CLIP W/ WIRE CONNECTED TO NEEDLE
TO THE GROUND OF THE PHONE..
4.PRESS FLASH NOW CONNECT THE TESTPOINT GENTLY TO AVOID DEAD PHONE HOLD..PRESS TESTPOINT THEN THE SOFTWARE ASK RELEASE THE TESTPOINT..
5. SMILE
6.AFTER FLASHING PRESS THE UNLOCK BUTTON FOLLOW THE INSTRUCTIONS 3 AND 4
7.PHONE UNLOCKED
SIR
I followed your istructions and did exactly as you stated
flashed phone complete
did unlock as well
now phone failed to power up on assemling back
pls is there any way to bring this phone back to life
need help asap
cos right now,i have a very furious customer
she is like pointing gun in my brain
all to usb-smart sharp3g tool
pls all help is appreciated
note;
phone still connect to tools
cheers1