K700i hang on language menu!!!!!Heeelp

[globalmedia100]

How can i repair this stupid phone K700i which hang on language menu with Cruiser????Please help!!

[fonecellar]

ok first make sure your battery is fully charged and is all ok 100%
make sure all connections on cable are clean and also the block on bottom of battery
reflash with latest files make sure you use same main and raw files and all should be ok;)
good luck have fun

[globalmedia100]

Don't work my friend!!!I flsah with latest files from support area,gdfs,main,raw fs!!!!

[hossam_on_line]

i have this proplem many time althogh the cruiser is best tool but cant solve it sometimes solve with setool with small file but sometimes is hardware proplem .

[globalmedia100]

No man !!It's 100% software problem ,only with sim card hang on language menu,in service test works fine all keypad and joystick

[abadon]

write k 700 lang loc fix
work

[fonecellar]

No man !!It's 100% software problem ,only with sim card hang on language menu,in service test works fine all keypad and joystick


now you did not mention this previously :confused:

[globalmedia100]

with K700 lag lock fix don't work my friend

[shahjee]

with K700 lag lock fix don't work my friend
try with hardware soul posted by Platijet

use search maybe work for u

[HilmanAnshori]

Use Universal Box, Works for me 100%:cool:

[.:Kuku:.]

Use Sonics Crack...(u will fine its working link in the forum)

Select Model.(K700i)
Just Check K700 Freeze Box.
Unlock Urs Phone..


;)


WBR
Kuku

[lwilson]

Is better use SETOOL to write the small fix file, but you can also use cruiser to direct unlock if not ok, change power chips on the phone, which is on upper side of CPU. 100% ok.

[shahjee]

Is better use SETOOL to write the small fix file, but you can also use cruiser to direct unlock if not ok, change power chips on the phone, which is on upper side of CPU. 100% ok.
could u explain more which chip to change??

waitting for ur reply

[jjfox04]

Try to do this, before doing hardware stuffs.

1. Before flashing, determine first the OTP CID for reference of your next moves.
2. Boot the phone via recovery selecting the correct OTP CID in your case.
3. Repair Certificate( This is very important). Detach phone,.
4. Boot now normally. Depending on the response of the software as to "unlock rsa first or convert the phone to brown first". Do as the software tell you to do so.
5. After seeing that phone rsa protection is weak. You are now ready to flash the phone with the latest version( I suggest).
6. After flashing, unlock the phone.

i think this could help you.

[lwilson]

AB2000 R1A or AB2001 R1A, which is on upper side of CPU & lower the camera socket.

[begginer]

Repair EROM Then flash with latest Firmware

[usernome]

Please post here that lang fix file !


Thanx !