View Full Version : nec e616vhow to flash
david laborator
04-23-2006, 21:16
i need help the procedure how to flash nec e616 and e616v i have sharp gx 30 com cable and nec e616 usb cable even sharp gx15 usb flashing cable so wich cable to use and how i can connect the phone with ultimo hpp server ver 1.2.5? thanx in advice:p
you can use the usb modified cable, it works without battery, insert the cable, ur system should detect the phone ,install the software that is located inside the program folder, once you have done this the led should change to blue. them you can now flash
david laborator
04-24-2006, 10:07
ok thanx bt how to modify usb cable ? give me the pin out
use ur cable come with fone
david laborator
05-01-2006, 20:17
my phone now connected and the light starting with yelow then blue bt when i flash the phone its given me error
see at computer manger
what com port u use
at divice manger
and setup it at your program
gambitjam
05-01-2006, 21:24
see at computer manger
what com port u use
at divice manger
and setup it at your program
uSE THE OBEX COM
Under Control Panel - Device Manager - Ports (e.g com18).
Make sure ur Battery is Charged to the FULL ( I mean Seriously Full Charged).
david laborator
05-02-2006, 08:42
thanx man u mean i have to flash with the battery attached? i use obex com 4!
darie cruz
05-06-2006, 10:00
yup....u need the battery to be attached then click start button & wait till it finished
david laborator
05-07-2006, 15:40
thanx to all now my phone alive !
Uzo Daddy
05-13-2006, 01:46
i need help the procedure how to flash nec e616 and e616v i have sharp gx 30 com cable and nec e616 usb cable even sharp gx15 usb flashing cable so wich cable to use and how i can connect the phone with ultimo hpp server ver 1.2.5? thanx in advice:
pls how do i get this softee,
what models it works for?
david laborator
05-16-2006, 18:53
use search botton man!