v3 restart

[sepid]

hi

v3 when calling restarting

plz problem

thanks for all

[scarb-man]

it looks like PA cold solder, try to reflow PA

[zahwi]

full flash ok solve it

[lmt]

just flash your phone with this file can solve the problem 100000% test
R374_G_0E.42.10R_A_PDS005_LP0039_DRM0001_JPJAVA_G_ 0E_V3_01_10R_GSMV3XXT677GA193_1FF

[sepid]

hi

plz link for version

[greeni222000]

hi

plz link for versionl
please if u solved ur problem try to send me an email to tell me how to solve this problem ? i have the same problem in v3i,l6,l7,e398, e1, when it registr the network it will be restarted , please if u solve ur problem tell me please
thanks in advance for ur replay
greeni222000@yahoo.com

[mobilesmith]

nothing more than a pa............ like v3688

[Kashif Khan]

But i solve my problem with flash the phone OCR version.
BR
Kashif Khan

[semirkose]

just flash your phone with this file can solve the problem 100000% test
R374_G_0E.42.10R_A_PDS005_LP0039_DRM0001_JPJAVA_G_ 0E_V3_01_10R_GSMV3XXT677GA193_1FF

please upload flash files...

[KhOliO]

it looks like PA cold solder, try to reflow PA


pls dear

can explain more what is PA

pls

many thx

[semirkose]

please upload files.v3.....calling restart problem...

[tawfek]

please upload files.v3.....calling restart problem...

[djluigi]

i dont think you can fix that by flashing the phone , PA is damaged thats why when you get a signal or phone registers to network phones restarts , there is nothing to do with the software reheat PA or remove and power phone you will notice phone will not restart because the damaged PA is removed

[KhOliO]

i dont think you can fix that by flashing the phone , PA is damaged thats why when you get a signal or phone registers to network phones restarts , there is nothing to do with the software reheat PA or remove and power phone you will notice phone will not restart because the damaged PA is removed

pls what is PA

can u explane more ???

ols replay

[semirkose]

i dont think you can fix that by flashing the phone , PA is damaged thats why when you get a signal or phone registers to network phones restarts , there is nothing to do with the software reheat PA or remove and power phone you will notice phone will not restart because the damaged PA is removed

v3 you calling this restart problem.

[vietnamfirmware]

link download flash file mototrola
username : sontayninh
pass": cuti
http://www.truongvinh.com/motorola.htm

[pusulateknik]

http://www.planetmotox.net/

[Zloy]

Service Bulletin :)

[sonuk]

v3 insert sim. what the prob?canany one help ?

[frostbite]

Could some body post a picture, where about the PA is on the bord.

Thanks

[djluigi]

here you go my friend http://i16.photobucket.com/albums/b5/djluigi7/DSC01930.jpg

location of PA in V3

[abou nar]

pls what is PA

can u explane more ???

ols replayPA =PF either of them means power amplifer or network ic

[BASSIM KHALF]

Change Other Battary Or Change P.f < Rf Power Amp I.c >

[aneesulislam]

hi.can any body tell me how to repair v3 ringer

[usernome]

When I put a simcard in the phone , my phone restarts when it gets network but when I try SOS call without simcard , it emites .

[mrmisudnjbd]

PA means Power Amplifier The network IC

[OB1]

Hi,
The PA that is being refered to is the Power Amplifier the intergrated IC that would amplify the signal that is coupled/mixed with the converted data and transmit it via the coax connector through the antennae through the open air to the nearest base tranciever station(GSM Network). It has typically got a silver cap or is black in colour (all contact point would be under thecomponent) and close to it will be a duplexer also typically silver in colour with about 6-8 legs/contact points. In terms of Motorola it would be under a RF (Radio Frequency) metal shield which you you would have to remove first using a hot air station and a cardfull approach. Remember hovever that affter replacement of this component the mobile would have to be re-callibrated/re-phased to suit the amplication carachteristics of the new amplifier.

Cheers.
OB1.

[OB1]

Hi,
The PA that is being refered to is the Power Amplifier the intergrated IC that would amplify the signal that is coupled/mixed with the converted data and transmit it via the coax connector through the antennae through the open air to the nearest base tranciever station(GSM Network). It has typically got a silver cap or is black in colour (all contact point would be under thecomponent) and close to it will be a duplexer also typically silver in colour with about 6-8 legs/contact points. In terms of Motorola it would be under a RF (Radio Frequency) metal shield which you you would have to remove first using a hot air station and a cardfull approach. Remember hovever that affter replacement of this component the mobile would have to be re-callibrated/re-phased to suit the amplication carachteristics of the new amplifier.

Cheers.
OB1.:)

[tarek hamd]

thx soooo much yes pa is the problem

[saf470]

i have one v3i with dummy network, network displayed full. but cant make a call, its displayed call-failed,. please help me urgent

[That'sme]

i have one v3i with dummy network, network displayed full. but cant make a call, its displayed call-failed,. please help me urgent
first try to repair pds. if not solved the just fill flash the phone 100% works.reply

[lokkinho]

pls what is PA

can u explane more ???

ols replay


PA = Power Amplifier for network which is also called RF IC.

[mobile20]

only software

restart by standard flash ok

reprirman_mobile@hotmail.com

[maplegsm]

if water damage just flash after wash

[Lhick]

PA = Power Amplifier for network which is also called RF IC.
PA & RF IC Mate are Different.:)

[Gozha]

sometimes very funny problem :) chech if battery contacts are clean... even if thy look clean.. clean them once again.. very often works... really,,, even pon 6280 turning of..and 8800...

[~ Nawab Traders ~]

hi mate in some cases this problem can be solved just replacing the phone battery its easy so try it.........

[jointaccess]

please what is calibration? and how can it be done?

allidtech@yahoo.com

[ilpigro]

hello!

im going crazy with this phone

i have two v3 with almost the same problem.

The first one restarts itself when closing the phone and sometimes just by doing nothing.

The second one restarts itself frecuently, with no reason. Sometimes it drop calls (when talking, the screen turns off and it make a noise and then restarts). =(

any ideas? pleasee help s.o.s. :confused:

[sharmin]

Check cable and battery connector , If it's ok then do repair pds, full flash with perfect firmware it will solve ur problem

[stylemobile]

hi bro plz chek its on off power battan ..cleen it.its 100%ok .i just do it .workinking 100%.*** help u. email.stylemobile@yahoo.com