patch of the IVT bluesoleil 2.1.3.0 VoIP Release 060429 [Archive]

lidouf

05-01-2006, 07:26

patch was only tested with my bt devices. so i wish u can be fortunately enough to use this patch....if u r the unlucky guy,so, plz tell me.

this is the link to download the original software :
http://www.bluesoleil.com/download/download.asp?resoure=ivt_bluesoleil_voip

and this is the release note and changelogs:
http://www.bluesoleil.com/download/index.asp?topic=voip_release_note

The following significant changes have been made to BlueSoleil 2.1.3 VoIP since it is build 2.1.2 VoIP:

Automatically show ever-connected devices on UI after BlueSoleil starts. //good news...
Bug fix: DUN fails on windows 2000 OS.
Bug fix: BlueSoleil does not support Nokia new phones (e.g. N series).
Bug fix: For some Bluetooth devices, BlueSoleil still runs in evaluation mode after registering a license key.
Bug fix: PAN cannot find physical network cards on some machines.
Bug fix: "End program -IVT Corporation..." dialog is shown when the system is being shut down.
Bug fix: BlueSoleil cannot run when there is no taskbar.
Bug fix: When "Welcome to Bluetooth" is shown at the first run, BlueSoleil behaves abnormally after standby/resume the system.
Bug fix: When PC suite 6.7 is installed and BlueSoleil is not set to auto-run on startup, more than one instance of BlueSoleil can run at the same time.
Bug fix: On media center OS, if there are too many com ports, LAP does not work.

timmeng

05-01-2006, 09:57

s0346821

05-01-2006, 17:22

Tanks, its works great!!!

Cakecatcher

05-01-2006, 22:12

Thank you very much!
I tried your other patch of bluesoleil 2.1.2.0 VoIP and it works also great!
Maybe we can get more patches for future releases?
Bluesoleil works great with my CSR-Dongle and Plantronics Pulsar 590a Headset.
With WIDCOMM (even with 5.0.1.2500) I was not successful.
Thanks again!

Vulcanite

05-03-2006, 02:01

2 lidouf
Is it pissible to use your patch for NON VoIP version?

Vulcanite

05-03-2006, 02:06

this is not a patch. it's only a patched file?

Amir-SkillZ

05-03-2006, 06:34

Patched Licensed File Actually
Can i use By ISSC harlos with it .???...At now i am using Widcomm soft
Reply Fast Any one?

lidouf

05-03-2006, 06:57

i'm poor in English..so the title of this post should be some confusion..I'm sorry for this...I restate as the following:
->this is only a cracked(patched) file(i wanna make a keygen at first, but its algorithm is some complex, so i give up this idea)..
->i didn't test on NON VoIP version..but I guess it can work fine..
->it's ok for ISSC dongle, for mine is.

Amir-SkillZ

05-03-2006, 14:17

thankx Lidouf So Cofirmation

frylord

05-03-2006, 15:22

Thansk works like a charm and atleast it has good a2dp support *cought* widcomm *cough*.

frylord

05-03-2006, 15:32

I dont know how to thank you! I really want Bluesoleil VOIP version, I cant seem to buy from their site. I even offered to pay more for their service, they turned me down. This is really a life saver. Thanks

C'mon if you want to use cracked software use it but don't give some bogus reason... You can buy the VoIP version of their site (just click on Store) for $15.

k0la

05-03-2006, 19:16

thanks work much much better than widcomm

timmeng

05-03-2006, 20:49

C'mon if you want to use cracked software use it but don't give some bogus reason... You can buy the VoIP version of their site (just click on Store) for $15.

I understand your skepticism, but please do not jump on to conclusion right away. Please go to Bluesoleil's forum, and check out my thread with the admin. Their software simply refuse to allow me into the "Purchase Page", stating that my bluetooth device is "incompatible". WHICH is total bull-crap, since the trial version worked perfectly.

So yeah, before you accuse me of stealing, check your facts first. BTW, even with the patched version, I did send $15 cheque to Bluesoleil China.

twill

05-06-2006, 19:31

Thanks for the patch, for some reason tho, when I copy over the patched file and run the VOIP plugin, it says voip not suppored by this version...did I do something wrong?

Thanks again

valsiglio

05-09-2006, 01:58

I cannot install these patch. please they help me (Guidance)

lidouf

05-10-2006, 02:33

2 Twill:
I found this problem,too. And I tested the original version, and sometimes it was so, too. Maybe bugs of the original version? The solution is that u restart the program again and it will be ok.
2 valsiglio:
only copy this file to the installation directory, and overwrite the same-name file...some dongle maybe can't be surpported.

bearcuor

05-10-2006, 03:27

IVT does not work with my Logitech bluetooth adapter(bt2.0)

valsiglio

05-12-2006, 12:32

2:lidouf
I have installed this patch. Is good for my MS-6967.
Thanks from Germany. It`s great work

BonScott

05-13-2006, 14:09

C'mon if you want to use cracked software use it but don't give some bogus reason... You can buy the VoIP version of their site (just click on Store) for $15.

I tried also to buy it but my vid pid was not supported!!!
USB\VID_044E&PID_3007\5&3038F488&0&1
its a internal orginal sony vaio VGN-S3XP ..

the logitec/widcomm works but still havent managed to get the high quality sound to work.

lidouf

05-13-2006, 14:46

U can try to edit these two files in the installed directory:bttl.ini&btcusb.inf. And add ur pid&vid to these two files...Maybe a surprise...But I can't guarantee it will work.U can try it.

BonScott

05-13-2006, 15:02

Great... brilliant job!! so far it works with the patches...
with my vid\pid i couldnt even buy the bluesoleil.

USB\VID_044E&PID_3007\5&3038F488&0&1

f_brian

05-17-2006, 11:38

i am looking for this too. thank you.

sayas

05-17-2006, 15:56

basuraparatodo

05-18-2006, 17:44

valsiglio,

you just need to replace the file "BlueSoleil.exe" in your installation folder with the file that lidouf kindly offers (dude, you rock).

valsiglio

05-19-2006, 22:35

2 basuraparatodo:

F**k off! Are you blind?

roma0803

05-20-2006, 10:22

2 basuraparatodo:

F**k off! Are you blind?

Great attidude kid. :rolleyes:

rst0x0d

05-20-2006, 18:31

Hello folks!
I am observing the patch, and found some strange issues.
1) It bigger, than original file by 600K, but original file is not packed\encrypted\etc. What contains the other 600K of code?
2) After start it connects to 211.94.168.252, http. And original version is not.
3) 211.94.168.252 belongs to China provider, Lidouf from china as well...
4) IVT Corporation located in china as well. but IVT's ip 72.9.248.106, not 211.94.168.252.
5) I am not paranoid, i just want answers.

lidouf

05-21-2006, 02:20

Hi, rst0x0d,
I think I must state as this for ur questions:
1). It's bigger than original file,Yes.BUT u say it is not packed. and I think U should study the original file carefully...do u know some info about "ASProtect 2.1x SKE -> Alexey Solodovnikov"?
2). I'm Chinese ,that's right. BUT my IP is NOT 211.94.168.252, Neither my pc's, nor my site's, nor my friends' ... What's **** the IP has any relation with me???
3). refer 2).
4). IVT's IP is 72.9.248.106, but do u know IVT has a branch www.bluesoleil.com?, and it's IP is???
5). ok. ASSUME that I have put some trojans or viruses in this file, U have rights to determine to use it or not, AND plz don't shout here.

superfrog

05-21-2006, 14:15

Its bluesoleil itself that is the spyware, probably when it is used in unlimited mode:

c:\>nslookup license.bluesoleil.com

Name: license.bluesoleil.com
Address: 211.94.168.252

There is a number of sites that are used within bluesoleil:
http://store.bluesoleil.com/
http://license.bluesoleil.com/
http://upgrade.bluesoleil.com/

If you are keen on you privacy:
Either patch the software using a hexeditor to other adresses, or
enter the following lines into your
C:\WINDOWS\system32\drivers\etc\hosts
file:
127.0.0.1 license.bluesoleil.com
127.0.0.1 store.bluesoleil.com
127.0.0.1 upgrade.bluesoleil.com

.:bono:.

05-21-2006, 20:57

thanks, this soft works for me, i try it with usb bt fujutech class1 and my k750i, it's the first time when i can use my phone like remote controle! it's so cool:)

rst0x0d

05-22-2006, 14:24

Lidouf. Thank you for your answers. I am happy now ;)
I am apologizing for assuming you put "malware" in the patch.

lidouf

05-25-2006, 13:43

rst0x0d, That's all right now.
I was very angry at first for your assumption. But It's ok now.
I'm very glad to hear any criticism on the warez itself, But plz don't assume that I have bad morality.

Thanks superfrog's explanation for this question and the effective solution.

woodalia

05-25-2006, 15:41

when i open the bluesoleil voip using the patch and have outlook open i get an error that says cannot load avgxchange32.dll (exact filename not sure off)
this message pops up as an outlook error. this box will not go away and says i should try detect and repair... i did that and same thing when reopening BS voip.
when i close BS voip my computer returns to almost normal. after reboot back to normal. running 2000 advanced server and runs like a tank normally.
any advice or suggestions as to what prob might be?
previously had basic BS that came with dongle and that works no prob.:(

i hope someone is still monitoring this. maybe has straight key or key gen by now?
woodalia

woodalia

05-25-2006, 15:50

why are there 3 rar files for patch? which to use? all 3? how? am i missing something? i believe i extracted 1st and replaced exe in /ivt/bluesoleil...

hope someone out there can explain. maybe this is why i had above problems with avg/outook.

woodalia:confused:

Eddie_O

05-27-2006, 02:14

Yes, I would also like help knowing what the 3 individual .rar files are for and which ones they replace in the folder, and how they are renamed.

It will be awesome to get this sorted as BlueSoleil sure don't make it easy to purchase their products.

Thanks in advance!

pichoscosama

05-28-2006, 23:09

It is divided into 3 parts. Download all of them, put them in the same directory and run part1.

onnyuho

05-29-2006, 02:05

Thanks again Thanks for the patch

Eddie_O

05-29-2006, 18:16

navythai

06-01-2006, 15:05

I cannot download partch 1 please help me

or sand to E-mail

navythai@mthai.com

Thanks

emobo

06-01-2006, 21:32

Alright, in my quest to enabled headset operation on my dongle I tried bluesoliel.

1. Found clean system
2. Installed bluesoliel software
2b. copied over the new .exe file
3. modifed inf file in driver directory of install to include my vid&pid
4. modifed ini file to include my vid&pid in an [HWxx] section
5. Plugged in device and installed driver (worked ok and ID'd as Broadcom 2035 in Dev manager)
6. ran bluesoliel

Bluesoliel environment opened and paused for a bit, then displayed that it could not find any devices.

Grumble...this dongle was not worth the $10... :confused:

grzehu

06-01-2006, 21:38

I cannot download partch 1 please help me

or sand to E-mail

navythai@mthai.com

Thanks

i've got the same problem... please send me first file...

rejestracjee@gmail.com

lidouf

06-02-2006, 02:41

http://www.moshoo.com/bbs/read.php?tid-180.html
maybe something error...
anyone can't dl here can also dl from this page. But u must register & post a reply then u can dl...

SoSouly

06-15-2006, 07:50

Many thx! been looking for this for some time..cheers:)

damaddog

06-19-2006, 01:13

C'mon if you want to use cracked software use it but don't give some bogus reason... You can buy the VoIP version of their site (just click on Store) for $15.
Could but if you got a "pirated' Dongle from ebay like me they will not sell you the software!

monocilinder

06-28-2006, 14:09

BlueSoleil[1].part1 is not recognised as an multivolume rar. It is probably damaged or so. Can you provide me with a working patch?

RonR

06-28-2006, 21:04

BlueSoleil[1].part1 is not recognised as an multivolume rar. It is probably damaged or so. Can you provide me with a working patch?

I just downloaded the three part archive from the first message in this thread and it extracted without any errors.

][No_WaY

07-01-2006, 09:08

MSI Star Key 2.0 works fine with widcomm but with bluesoleil cannot found the driver!!!

any idea?

regards
][No_WaY

Razo

07-02-2006, 12:20

If you are keen on you privacy:
Either patch the software using a hexeditor to other adresses, or
enter the following lines into your
C:\WINDOWS\system32\drivers\etc\hosts
file:
127.0.0.1 license.bluesoleil.com
127.0.0.1 store.bluesoleil.com
127.0.0.1 upgrade.bluesoleil.com

I know this is an old post but i've just found it and feel i should say this.
If you are using windows XP or 2K trying to talking to 127.0.0.1 whle NOT running a local web server can create slowdowns as your computer will keep trying this address untill it times out.
A simple way to get around this is to set the ip to 0.0.0.0 The computer see's it as an invaild ip and instantly times out. This is a useful trick for programs like spybot that can add known sites that download spyware. spybot by default uses 127.0.0.1 but as i stated above slows down some websites. All i do is load up "notepad.exe %windir%\system32\drivers\etc\hosts" without the quotes from start run, press CTRL+H (find and replace) and replace 127.0.0.1 with 0.0.0.0
NOTE: if you use replace all remember to set 0.0.0.0 localhost back to 127.0.0.1

Like i said this is an old post but thought i would try and help

ihhann

07-06-2006, 01:32

Thanks so much, this rocks.

(to any new people, you need to download the files, unzip them and install the new files into the existing bluesoleil directory, overwriting any files that may have the same name)

I've downloaded all files, but after extracting them to the BlueSoleil folder, I realized they all have the same file name. For my purposes (making a Socketcom USB adapter work with a Plantronics P590), this didn't work. I then just extracted the first one and that worked like a charm.

(Many thanks to lidouf.)

abyz

07-08-2006, 08:19

The address that it is trying to connect to is in fact license.bluesoleil.com - I would recommend you block it with either a firewall or the hosts file.

Lidouf,

Thanks SO much for this. I have spent so many hours trying to get this Bluetake BT007ex to work properly. They provide the Toshiba BT stack, but that doesn't allow AVRCP to control anything but Windows Media Player. WinXP's builtin stack and Wildcomm stacks both fail to detect my headphones at all. Only Bluesoleil works for everything, but I had almost given up hope of getting the non-trial version when I found your patch. Again, thanks!

-abyz

meo_udon

07-14-2006, 16:20

Thanks you for patchf

mmubashar

07-18-2006, 11:51

lidouf, you are my MASTER!! Thanks SO MUCH!! I love you man!!
I finally got my Motorola H-700 bluetooth headset to be used with my laptop!! Yeehaw!! If not because of you, I never would've succeed!!Now my bluetooth headset is beyond just mobile use!! :D Thanks so much mate!!

fiveb

07-19-2006, 16:12

:rolleyes: :D :p :rolleyes: :D ;)

fiveb

07-19-2006, 16:17

For newbies (being one myself) this really works and if you read this far then like me you probably didn't know how to preform the actual procedure of patching the software. Here's the short and sweet of it :D
1. download software and install (I've tried it with both voip and regular versions it works fine on both bluesoleil.com)
2. download software to decompress .rar files (I used winrar download.com)
3. select all 3 files from the first post of this killer thread and download to your desktop
4. select all 3 files from your desktop right click and extract them to the folder your bluesoleil program installed to (will be somthing like c:\programfiles\ivtsoftware\bluesoleil)
5. your computer will ask you if you want to replace duplicate files, you want to choose yes to all.
6. after extraction is complete start bluesoleil software and enjoy ultimate bluetooth connectivty.
Thanks again lidouf and everyone else who contributed to this thread

vitucciog

07-21-2006, 04:25

Hi all!! Sorry for my bad english:D...

I've just installed Bluesoleil with the crack...
...but when Windows starts appear a message that says "Questa versione di Bluesoleil non supporta Voip plugin" (translated more o less is "this version of bluesoleil doesn't support the voip plugin"):eek:
...then the icon of the voip-plugin disappear...
Then I can re-open the voip plugin and all goes right...
But what is this message:confused:?
It appears on your pc's too?

Thank you...
Bye...

vitucciog

07-22-2006, 21:01

no one knows something of this trouble?

lidouf

07-24-2006, 03:06

OK, vitucciog, I have met the same question, And I tried the origin version(unpatched version), and I was hint the same info, so i doubted it maybe bugs of this software, of courz it maybe also bugs of the patched file. however, I think I should spend some time on finding the reason and solving this trouble.

vitucciog

07-25-2006, 00:24

I think I should spend some time on finding the reason and solving this trouble.
:Dthank you...
...I'll wait for you...:p

mutazn

07-25-2006, 08:20

Anyone else having problems with the automatic loading of HID's? I have to use my keyboard to login to windows everytime and then manually set all my bluetooth devices again!!

felang

07-31-2006, 06:25

Ok, so i installed the bluesoleil software, overwrote the .exe with the one from the patch. But when I run the bluesoleil, and then connect my usb dongle (kensington 2.0), the software does not seem to detect it, I only get the add new hardware window from windows (XP PRO SP2) and usb drivers from bluesoleil directory don't work. Should I edit the files that were mentioned before to include my VID and PID (VID_047D&PID_105E) as they are not included?

Sorry if this is dumb question as I am new to all of this, any help would be greatly appreciated...

lidouf

07-31-2006, 08:28

sure, U should add your BT dongle's VID&PID into the file btcusb.inf first and edit the file bttl.ini also.

Maître Désastre

08-03-2006, 00:48

The archive in post http://www.GSMhosting.com/vbb/showpost.php?p=1908847&postcount=7 contains a cracked version of BlueSoleil VoIP 2.1.3.0

p0rnrh3tt

08-03-2006, 06:39

lidouf, thanks for the patch .. :) .. works great on my MSI BToes .. :)

emjay

08-05-2006, 15:45

Is this patch also working for the new 2.3 version?

RonR

08-05-2006, 18:45

Is this patch also working for the new 2.3 version?

What's posted here (in the first message) is NOT a patch. It's a patched EXE file (from version 2.1.3.0). Therefore, it will only work with v2.1.3.0.

KiDolphin

08-06-2006, 14:29

When can we use BlueSoleil_2.3_Release_060728's patch?

silverflyguy

08-10-2006, 18:09

Just wanted to say thank you for the patch!

emjay

08-11-2006, 15:28

What's posted here (in the first message) is NOT a patch. It's a patched EXE file (from version 2.1.3.0). Therefore, it will only work with v2.1.3.0.

If you can read: this patched FILE also worked for the previous version 2.1.2.0 and also works for the 2.3 version..

brainsucker.na

08-13-2006, 15:07

That patched exe file from 2.1.3 Voip doesn't work properly with 2.3.0 VoIp drivers. At first sight it did, however the AD2P (high quality audio streaming to the headset) is not working. Place the original exe file, and it will work with 5M limit. Replace with crack, and no sound again. The only thing I could state is the Audio Gateway is not working properly.
Waiting for the proper crack...

p.s. Haven't tested other functions beside AD2P...

LuMe96

08-25-2006, 15:39

Hi to all,

I've been trying to get my Vaio S4 bluetooth to work with my Jabra BT620s headset for days now and finally found this very nice forum.

I have tried the different Widcomm and Toshiba stacks without success. With Widcomm (4.x, 5.0.x & 5.1.x) no sound (A2DP) with Toshiba (3.x & 4.x) "bluescreens" right after pairing the headset. The only stack with works really great is the Bluesoleil 2.3.0, unfortunately they do not "support" my BT device and I therefore can't purchase a license. I've found the patch for the 2.1.3 but no place where to get the actual driver. Does anybody have a link to download the 2.1.3 VoIP Version, please ?

Thank's in advance.

Bye.
LuMe

LuMe96

08-25-2006, 17:44

Ok, don't bother. Found a download link for the 2.1.3 VoIP version.
pm me if someone needs the link.
Bye

vranoga2

08-25-2006, 18:32

you have PM. .

priegog

08-30-2006, 20:05

LuMe96

08-30-2006, 21:25

Hi. With bluesoleil updating to v.2.3 I can't seem to find the old 2.1.3.0 VoIP version anywhere to use this patch with. Could somebody please point me in the right direction? Of course a patched file for the 2.3 version would be awesome, but lidouf has said in another thread it can't be done. The current patch DOES work with my 2.3 version, but it won't let the VoIP plugin work properly. Hence the need for the 2.1.3.0 version. Thanks in advance

You've PM.

It can be done, there's one available. The pb is that the Audio is not working. Have been in contact with the person who made the patch but as he doesn't have a BT headset, he can't test/find the protection concerning the Audio (it's a patched exe of the 2.3 version, not the 2.1.3, I checked).

He said that he might get a headset to test. If I have news, I'll keep you informed.

Bye.

tamiyak

09-04-2006, 04:53

Dude i frikin' love you, absolutely great job.

Thanks again

:D

kripal_81

10-08-2006, 19:55

Donno how to thankyou for this wonderful work, Lidouf...Thanks a lot.................

medward

10-22-2006, 03:36

sure, U should add your BT dongle's VID&PID into the file btcusb.inf first and edit the file bttl.ini also.

Thanks for your patch, now no restriction but somehow it does not show my device, I use a billionton. I haven't edited the files.... how to do it, pls guide.......:confused: pls help at the earliest

mmubashar

10-23-2006, 08:21

Guys, there's a new release..Any patch for it? ;)

tejedusor

10-23-2006, 15:10

Guys, there's a new release..Any patch for it? ;)
No new release as far as I can see, unless you're talking about v. 2.3. If so, have a look here http://forum.gsmhosting.com/vbb/showthread.php?t=325762

wutduhphuk

10-24-2006, 08:02

Ni hau ma Lidouf? Thank you for the effort you have put into the latest Voip version. Unfortunately with the built in Blutooth on my IBM T30 laptop I can't get any audio when trying to listen to music. Everything seems to work correctly even when you look at the 'status' you see the blu meter working ok. When I put the original exe file back in everything works fine except I'll get cut off at the 5mb limit. Off course BluSoleil doesn't support my device (when I clic on buy). I find it odd though because when I look in the inf files my VID & PID are in both...What's them Chinese up to?...I'm half Chinese for your info..... Hey Lidouf please verify the exe again when you have time. CheChe...Da Je

wutduhphuk

10-24-2006, 08:05

I don't want to double post....excuse me.

lidouf

10-27-2006, 03:33