View Full Version : Nokia ALL Availible Codes
moonmoon8
05-06-2006, 15:30
Nokia Useful & Fun Codes !!!
#PW+1234567890+1# = GIVES PROVIDER-LOCK STATUS
#PW+1234567890+2# = GIVES NETWORK-LOCK STATUS
#PW+1234567890+3# = GIVES COUNTRY-LOCK STATUS
#PW+1234567890+4# = GIVES SIM-CARD-LOCK STATUS.
*#0000# Displays your phones software version:
1st Line : Software Version
2nd Line : Software Release Date
3rd Line : Compression Type
*#06# For checking the International Mobile Equipment Identity (IMEI Number)
*#2640# Displays security code in use
*#0000# Display Software ver. and compresion type
*#100# Shows the phones number
*#639# Programming - min/sid
*#67705646# Removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#7760# Manufactures code
*#7780# Restore factory settings
*#92702689# Displays:
1. Serial Number
2. Date Made
3. Purchase Date
4. Date of last repair (0000 for no repairs)
5. Transfer User Data. To exit this mode you need to switch your phone off then on again
*#30# Lets you see the private number
*#94870345123456789# Deactivate the PWM-Mem (not recommend)
*#746025625# Displays the Sim Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible
**21*number# Turn on "All Calls" diverting to the phone number entered
**61*number# Turn on "No Reply" diverting to the phone number entered
**67*number# Turn on "On Busy" diverting to the phone number entered
*3001#12345# Programming / Field Test
*#21# Allows you to check the number that "All Calls" are diverted to
*#61# Allows you to check the number that "On No Reply" calls are diverted to
*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to
*#67# Allows you to check the number that "On Busy Calls" are diverted to
*#43# Allows you to check the "Call Waiting" status of your phone.
#3370# Enable Enhanced Full Rate Codec (EFR)
#4720# Disable Half Rate Codec (correct code)
*#1345# Shows credit value
lotusbrs_trl
05-07-2006, 05:45
hai it very nice idea to the this tips for every body it very usefull to all
Gr8 post man...
Keep up the gud work
Regards,
svjazz
Wow! Thanks, I really found these usefull...
Do u have codes that for Three on noki@6630 to all it to allow it to use any sim
You must unlock it! It's not for free at this time, sorry.
ps - look at "bb5" subforum for more information
ronaldo-9
05-08-2006, 12:19
Nokia Useful & Fun Codes !!!
#PW+1234567890+1# = GIVES PROVIDER-LOCK STATUS
#PW+1234567890+2# = GIVES NETWORK-LOCK STATUS
#PW+1234567890+3# = GIVES COUNTRY-LOCK STATUS
#PW+1234567890+4# = GIVES SIM-CARD-LOCK STATUS.
!!!!!WARNING!!!!!
DO NOT ENTER THESE IF YOUR PHONE IS LOCKED TO A NETWORK!!!!
YOU ONLY GET 5 TRYS THEN UR PHONE WILL NOT UNLOCK WITH IMEI CALC
U WILL NEED A CABLE UNLOCKIN. THIS INC BB5 AS THE NEXTWORK PROVIDERS CAN PROVIDE CODES AT A FEE.
sorry for caps but u need to understand this
FoneFusion
05-08-2006, 12:29
Nokia Useful & Fun Codes !!!
#PW+1234567890+1# = GIVES PROVIDER-LOCK STATUS
#PW+1234567890+2# = GIVES NETWORK-LOCK STATUS
#PW+1234567890+3# = GIVES COUNTRY-LOCK STATUS
#PW+1234567890+4# = GIVES SIM-CARD-LOCK STATUS.
!!!!!WARNING!!!!!
DO NOT ENTER THESE IF YOUR PHONE IS LOCKED TO A NETWORK!!!!
YOU ONLY GET 5 TRYS THEN UR PHONE WILL NOT UNLOCK WITH IMEI CALC
U WILL NEED A CABLE UNLOCKIN. THIS INC BB5 AS THE NEXTWORK PROVIDERS CAN PROVIDE CODES AT A FEE.
sorry for caps but u need to understand this
Thanks nearly put this into my 6630!!
Regards,
Fonefusion
moonmoon8
05-09-2006, 05:24
For Nokia DCT-L (9110, 9210i, 9210 Etc)
Software Version : At Main Out Side Display
*#0000# or *#682371158412125#
Prodect Date :
*#3283#
For Hard Reset For Nokia DCT-L (9110, 9210i, 9210 Etc)
Eject Battery and Reinsert Battery and Before Nokia Hands Appear Press :
Ctrl + Shift + F ... this will ask u Confirmation about Formation, Press YES by push top right LCD Button ... A Processing Bar Appear and Complete Your Phone And Make As Fresh And Kool !
Njoy!
Regards
~MahiL~
moonmoon8
05-09-2006, 05:24
For Nokia DCT-L (9110, 9210i, 9210 Etc)
Software Version : At Main Out Side Display
*#0000# or *#682371158412125#
Prodect Date :
*#3283#
For Hard Reset For Nokia DCT-L (9110, 9210i, 9210 Etc)
Eject Battery and Reinsert Battery and Before Nokia Hands Appear Press :
Ctrl + Shift + F ... this will ask u Confirmation about Formation, Press YES by push top right LCD Button ... A Processing Bar Appear and Complete Your Phone And Make As Fresh And Kool !
Njoy!
Regards
~MahiL~
moonmoon8
05-09-2006, 05:27
Sorry Due To Some Problem With My PC! i posted two times my POST! SOrry AGain !
ronaldo-9
05-10-2006, 00:45
Thanks nearly put this into my 6630!!
Regards,
Fonefusion
No problem mate. Every one needs to be carefull when entering codes that they dont know.
Here is the list :
Some of these may not work.
When various network functions are selected via the cellphone's menu using the
keypad, the cellphone automatically generates the corresponding GSM network
command string and transmits it to the network. These commands can however be
manually entered via the keypad.
Each command is prefixed with either one or two * or # characters as
follows:
** register and activate
* activate
## de-register (Deactivate)
# deactivate
*# check status
Once each command has been entered, if it is a network command it must be
transmitted to the network by pressing Send key which acts as an enter key.
Enter numbers in full international format +CountryAreaNumber.
Command Description Command String:
Security:
Change call barring code **03*OldCode*NewCode*NewCode#SEND
Change call barring code **03*330*OldCode*NewCode*NewCode#SEND
Change PIN code **04*OldPIN*NewPIN*NewPIN#SEND
Change PIN2 code **042*OldPIN2*NewPIN2*NewPIN2#SEND
Unlock PIN code (when PIN is entered wrong 3 times)
**05*PUK*NewPIN*NewPIN#SEND
Unlock PIN2 code (when PIN2 is entered wrong 3 times)
**052*PUK2*NewPIN2*NewPIN2#SEND
Display IMEI *#06#
Call Forwarding: (Diverting)
De-register all call diversions ##002#SEND
Set all configured call diversions to number and activate **004*number#SEND
De-register all configured call diversions (no answer, not reachable, or busy)
##004#SEND
Unconditionally divert all calls to number and activate **21*number#SEND
Activate unconditionally divert all calls *21#SEND
De-register unconditionally divert all calls ##21#SEND
Deactivate unconditionally divert all calls #21#SEND
Check status of unconditionally divert all calls *#21#SEND
Divert on no answer to number and activate **61*number#SEND
Activate divert on no answer *61#SEND
De-register divert on no answer ##61#SEND
Deactivate divert on no answer #61#SEND
Check status of divert on no answer *#61#SEND
Divert on not reachable to number and activate **62*number#SEND
Activate divert on not reachable *62#SEND
De-register divert on not reachable ##62#SEND
Deactivate divert on not reachable #62#SEND
Check status of divert on not reachable *#62#SEND
Divert on busy to number and activate /td> **67*number#SEND<
Activate divert on busy *67#SEND
De-register divert on busy ##67#SEND
Deactivate divert on busy #67#SEND
Check status of divert on busy *#67#SEND
Change number of seconds of ringing for the given service before diverting a call.
Seconds must be a value from 5 to 30. De-registering the same divert
will also delete this change. **service*number**seconds#SEND
Call barring:
Activate barr all outgoing calls (see Security to set code) **33*code#SEND
Deactivate barr all outgoing calls #33*code#SEND
Check status of barr all outgoing calls *#33#SEND
Activate barr all calls **330*code#SEND
Deactivate barr all calls #330*code#SEND
Check status of barr all calls /td> *#330*code#SEND<
Activate barr all outgoing international calls **331*code#SEND
Deactivate barr all outgoing international calls #331*code#SEND
Check status of barr all outgoing international calls *#331#SEND
Activate barr all outgoing international calls except to home country
**332*code#SEND
Deactivate barr all outgoing international calls except to home country
#332*code#SEND
Check status of barr all outgoing international calls except to home country
*#332#SEND
Activate barr all outgoing calls **333*code#SEND
Deactivate barr all outgoing calls #333*code#SEND
Check status of barr all outgoing calls *#333#SEND
Activate barr all incoming calls **35*code#SEND
Deactivate barr all incoming calls #35*code#SEND
Check status of barr all incoming calls *#35#SEND
Activate barr all incoming calls when roaming **351*code#SEND
Deactivate barr all incoming calls when roaming #351*code#SEND
Check status of barr all incoming calls when roaming *#351#SEND
Activate barr all incoming calls **353*code#SEND
Deactivate barr all incoming calls #353*code#SEND
Check status of barr all incoming calls *#353#SEND
Call waiting:
Activate call waiting *43*#SEND
Deactivate call waiting /td> #43##SEND<
Check status of call waiting *#43#SEND
Calling Line Identification:
The following only works if CLIP and CLIR are enabled:
CLIP: Presentation of the number of the incoming call
Activate CLIP **30#SEND
Deactivate CLIP ##30#SEND
Check status of CLIP *#30#SEND
CLIR: Presentation of one's own number to the to the called party
Activate CLIR **31#SEND
Activate CLIR for the actual call *31#numberSEND
Deactivate CLIR ##31#SEND
Deactivate CLIR for the actual call #31#numberSEND
Check status of CLIR *#31#SEND
COLP: Presentation of the actual number reached (if number called was diverted to
another number
Activate COLP *76#SEND
Deactivate COLP #76#SEND
Check status of COLP *#76#SEND
COLR: Presentation of the original number called by the calling party (if the call was
diverted to this cellphone)
Activate COLR *77#SEND
Deactivate COLR #77#SEND
Check status of COLR *#77#SEND
GSM Network Service Codes:
Note: That at present only the following service codes are in use:
11 Speech
13 fax
25 data
In the future we will be able to control our individual calls by using of the following
service codes. To do this the user has to insert the service code in front of the last # in
the MMI command above.
For example the sequence *21*number*16# would divert all SMS calls
to the given number.
Cellphone services:
10 = All types of cellphone services
11 = Speech service
12 = Data service
13 = Fax
14 = Datex-J
15 = Teletex
16 = Short message service (SMS)
18 = All data services without SMS
19 = All cellphone services without SMS
Carrier services:
20 = All services
21 = All asynchronous services
22 = All synchronous services
23 = 3.1kHz services
24 = Synchronous point-to-point connections including PAD's (all synchronous data
services)
25 = Asynchronous point-to-point connections including PAD's (all asynchronous data
services)
26 = Data packet sending including PAD's (all synchronous data packet services)
27 = Services with PAD-share
29 = Digital connection with 12kbps
pankaj207
07-29-2006, 15:41
hi this is very good
my mo is nokia 6600
pl give me quickoffice 2.3.6 unlock code
dearsir
tanx for ur usefull codes