ct568

[danex_2000]

hi infinity team please help about ct568 i try to flash many times the result like this...it is the cable problem or the phone itself? before the problem is hang in text message but now is dead.

COM5 selected
Device: Philips 568
Checking data, wait...
Action: Flash write
Write: Firmware
Write: Map/Customization
Write: Language Pack
Skip: Eeprom
Boot...
Press and HOLD Power button !
Connecting, wait...
Release Power button !
Flash: 98007400000032
Flash: 98BC0800000000
Boot Done
Set baud...
230400
Set baud Done
Check Flash...
Check Flash Done
Check space...
Check space Done
Check parameters...
Check parameters Done
Format file system...
area-01...
area requested/selected: 02/02
area-02...
area requested/selected: 02/02
Format file system Done
Write...
Write: Firmware
area requested/selected: 01/01
Err: wrong answer[15]
Err: write[03]: 01080000
Retrying...
Err: wrong answer[15]
Err: write[03]: 01080000
Retrying...
Err: wrong answer[15]
Err: write[03]: 01080000
Retrying...
Err: wrong answer[15]
Err: write[03]: 01080000
Retrying...
Err: wrong answer[15]
Err: write[03]: 01080000
Retrying...
Err: wrong answer[15]
Err: write[03]: 01080000
Retrying...
Err: wrong answer[15]
Err: write[03]: 01080000
Retrying...
Err: wrong answer[15]
Err: write[03]: 01080000
Retrying...
Err: wrong answer[15]
Err: write[03]: 01080000
Retrying...
Err: wrong answer[15]
Err: write[03]: 01080000
Retrying...
Err: wrong answer[15]
Err: write[03]: 01080000
Retrying...
Err: wrong answer[C6]
Err: write[03]: 01080000
Retrying...
Err: wrong answer[]
Err: write[03]: 01080000
Retrying...
Write Fail
Finished
Remove/Install battery now !
Time used: 134 sec

[InfinitySupport]

Hi,

Use fully charged battery.
Try to repeat flash process several times. If you will see error at the same address it can be that flash chip damaged.

[danex_2000]

Hi,

Use fully charged battery.
Try to repeat flash process several times. If you will see error at the same address it can be that flash chip damaged.

sir i try to reheat slightly the flash ic and repeat the proccess the phone is working thank you for your good response...thanks a lot

[sharmin]

Yes , many of 568 show the problem. and the solution I think heat the flash ic with 100w light for 15 minutes and then flash. then everything will ok and no hang and no camera option problem