USB-smart Compal_Tool_v12.exe Cracked

[cooltel]

This Program tested???:D

http://rapidshare.de/files/22423036/Compal_Tool.zip.html

[moldovan]

This Program tested???:D

http://rapidshare.de/files/22423036/Compal_Tool.zip.html

Yes WORK fine ! :D
Work on C257, C261, V175-177:
- Direct Fast Unlock (45 seconds) - OK
- Read EEPROM - OK
- Write EEPROM
- Read FFS - OK
- Write FFS
- Erase FFS
- Read Flash - OK
- Write Flash

Wait for next IEE1394 Smart dongle from Zulea. :D
WBR !

[Tr0nAd0r]

Tested Motorola C261 de Colombia

[vitja2002]

Full tested:
- Direct Fast Unlock (45 seconds) - working
- Read EEPROM - Working
- Write EEPROM - not working
- Read FFS- not working
- Write FFS- not working
- Erase FFS- Working
- Read Flash- not working
- Write Flash- not working

[khideg]

what cable to use, i have usb,, but com i only that i can select.

[fbsgsm]

gooooooooooooooooooooood work

[shahzadlinks]

use the x60 cable for unlocking

[Tr0nAd0r]

I use the C115 serial cable,, working 100%

[khideg]

schematic for c115 serial cable?

[moldovan]

SoftSkiner
You are absolutly RIGHT !
WBR !

[DOUHAL]

Also exist nice Cracked soft HERE (http://www.douhal.com/Users/Motorola/P2K_Easy_Tool_v39.rar)

[paullovinicius]

the winscard.dll in the compal cracked is the same of p2k easy 3.9
md5sum verified...
can anyone post the others softs of zulea?
can anyone compare the "Compal_Tool_v12.exe" and the "P2K_Easy_Tool_v39.exe" of the rar cracked pack with the original files?
maybe we can only change the winscard.dll with cracked version to use the other softs...


thx!

[wynasoft1]

Tested Motorola C261 de Colombia


man how did you unlock im tested in a few c261 and dont work and i have original soft not cracked.

regards

[infogsm]

me i fack the one who cracked the sw not zulea and every sw cracker !!
br

[davor2003]

c261 motorola not working


orjinal and cracked not working

fake

[Mr/konsowa]

gooooooooooooooooooooood work cooltel *****

[Tr0nAd0r]

man how did you unlock im tested in a few c261 and dont work and i have original soft not cracked.

regards

Can unlock certain phones,, i tested in 1 unit and work good for this..

I test and only work Unlock for me, the others functions dont work

What cable are you using??

[Siemens man]

hi guys
CRECKED soft working????? really Cracked???
where is cracked soft?
thanks a lot

[Leo140]

working, tested with e398

[anhtam]

working, tested with e398

with Compal Tool ????

[the real bender]

working, tested with e398

e398?!! what soft are you using to test with?!! :confused:

[Afzaal]

2days Back P2k tool was Cracked yester Compal_Tool
Whats Going ON Here.... :(
Bad Bad Bad Really Bad...
Regards and Pray for GSM Market.

[Leo140]

sorry with this one
P2K_Easy_Tool_v39.exe
hehhehe

[ASHIF]

2days Back P2k tool was Cracked yester Compal_Tool
Whats Going ON Here.... :(
Bad Bad Bad Really Bad...
Regards and Pray for GSM Market.

All zulea's product has been cracked since he is making soft for gsm.....
Cracking zulea's soft is a tradition in this business

Poor security!!!!!!!!!!!!!!!!!!111

[Genius]

Security is not poor !
But his software's are best in field, easy to use .
Any one can afford it to buy, even crackers & hackers :) and for
them that is the big challenge make it work without dongle so that
other people see their "NICKNAME" and remmeber it.
Spent time & time to show other members that they are master of reversing code, but this is not such gift if U not use is weisly!
I will prepare myself for my service store and wait dead units :) but price
for repair now will be double as usuall.

B.R
GeniuSShadOW

[Siemens man]

tested Cracked soft not working. Master for kill phones!!!!!!!!!!!!!!!!!!!!!!

[luigivsf]

compal_tool not working for c261 units.. look


Entring FlashMode...
Please press power ON button...
Syncronization with MCU OK...
MCU ID read OK...
Sending loader signature...
Loader signature accepted...
Sending loader...
Loader accepted...
Syncronization with loader...
Syncronization with loader OK...
FlashMode Active...
Loader initialization...
Reading loader revision...
Read loader revision error...
Disconnected...


and does not work.. any help?

[Tr0nAd0r]

All zulea's product has been cracked since he is making soft for gsm.....
Cracking zulea's soft is a tradition in this business

Poor security!!!!!!!!!!!!!!!!!!111

Yes is a tradition :D :D

@All: The cracked Compal Tool work == to Original, the people that have the original soft is having this same troubles.

If you can't unlock a phone with this crack you must buy the Original and wait for the updates of this tool from Zulea

[CyberGSM]

Moto C261 doesn´t work with some HW or SW versions!!!


Entring FlashMode...
Please press power ON button...
Syncronization with MCU OK...
MCU ID read OK...
Sending loader signature...
Loader signature accepted...
Sending loader...
Loader not accepted...

[ednacell]

NOT WORKING )))))))))

Entring FlashMode...
Please press power ON button...
Syncronization with MCU OK...
MCU ID read OK...
Sending loader signature...
Loader signature accepted...
Sending loader...
Loader accepted...
Syncronization with loader...
Syncronization with loader OK...
FlashMode Active...
Loader initialization...
Reading loader revision...
Reading EEPROM 0x29 block subsidy lock state...
SPI initialization...
Loader initialization OK...
Unlocking phone...
Unlock phone error...
Disconnected...

Also on starting program get error message
ERRORE SULLA WINSCARD.DLL

I using windows ME and not working.........

[Tr0nAd0r]

Tested now in C261 Comcel, works ok!!

This soft only work for certain versions of phone,, in here (Colombia) work in the phones of 2 operators (Comcel/Movistar) and dont work with the other operator (OLA)


Entring FlashMode...
Please press power ON button...
Syncronization with MCU OK...
MCU ID read OK...
Sending loader signature...
Loader signature accepted...
Sending loader...
Loader accepted...
Syncronization with loader...
Syncronization with loader OK...
FlashMode Active...
Loader initialization...
Reading loader revision...
Reading EEPROM 0x29 block subsidy lock state...
SPI initialization...
Loader initialization OK...
Unlocking phone...
Reactivating 0x29 BLock...
Reactivating 0x28 BLock...
Phone Unlocked...
Disconnected...

[Tr0nAd0r]

Images of the soft and mobile

[OLIS]

I use cable Motorola T190.

Entring FlashMode...
Please press power ON button...
Syncronization with MCU OK...
MCU ID read OK...
Sending loader signature...
Loader signature accepted...
Sending loader...
Loader accepted...
Syncronization with loader...

And all...
What is wrong?

[Crumarix1]

Entring FlashMode...
Please press power ON button...
Syncronization with MCU OK...
MCU ID read OK...
Sending loader signature...
Loader signature accepted...
Sending loader...
Loader accepted...
Syncronization with loader...
Syncronization with loader OK...
FlashMode Active...
Loader initialization...
Reading loader revision...
Reading EEPROM 0x29 block subsidy lock state...
SPI initialization...
Loader initialization OK...
Unlocking phone...
0x29 BLock unknow state...
Unlock phone error...
Disconnected...


?????

[Emmaddy]

c113 unlocker please help me

[uking]

Yes WORK fine ! :D
Work on C257, C261, V175-177:
- Direct Fast Unlock (45 seconds) - OK
- Read EEPROM - OK
- Write EEPROM
- Read FFS - OK
- Write FFS
- Erase FFS
- Read Flash - OK
- Write Flash

Wait for next IEE1394 Smart dongle from Zulea. :D
WBR !
--------------------------------------------------------


Do we have C261 on sale in Colombia?
hmm...not pretty sure of that.

[selfbox]

Tested now in C261 Comcel, works ok!!

This soft only work for certain versions of phone,, in here (Colombia) work in the phones of 2 operators (Comcel/Movistar) and dont work with the other operator (OLA)


Entring FlashMode...
Please press power ON button...
Syncronization with MCU OK...
MCU ID read OK...
Sending loader signature...
Loader signature accepted...
Sending loader...
Loader accepted...
Syncronization with loader...
Syncronization with loader OK...
FlashMode Active...
Loader initialization...
Reading loader revision...
Reading EEPROM 0x29 block subsidy lock state...
SPI initialization...
Loader initialization OK...
Unlocking phone...
Reactivating 0x29 BLock...
Reactivating 0x28 BLock...
Phone Unlocked...
Disconnected...



Yes. i have the same but i insert sim and phone say enter subsycode.phone was from comcel

[Khayyal]

good software work fine for unlock c261

[ok2000]

This Program tested???:D

http://rapidshare.de/files/22423036/Compal_Tool.zip.html

Bad software:mad: :mad: :mad: :mad:

[Afzaal]

LOL
Same Soft Some one Comment Good
Some one Bad.
New Comer can't Decide in this kinda Reviews.
BR.

[shadow_t69]

what proccess are u doing to unlock the c113 motorola...please i need solution asap.

[Tr0nAd0r]

what proccess are u doing to unlock the c113 motorola...please i need solution asap.


Infinity Box

http://www.infinity-box.com/

[LHOT]

Pls. if you have a diagram of cable to be use for compal tool pls post it here

[FullFLASHgSMPH]

any One Have Flashfile C261 For Hang And Reboot

[LHOT]

Can i use a cable from ufs3?

[khideg]

c261 unlock problem..

Entring FlashMode...
Please press power ON button...
Syncronization with MCU OK...
MCU ID read OK...
Sending loader signature...
Loader signature accepted...
Sending loader...
Loader not accepted...

[infozohaib]

hello dear,

i have problem in L7 iTUNE is it unlock able.

SmartMoto 1.23
Clip serial: , version: 2.26, initializing... OK
Searching for phone... found Motorola Phone (L7 iTunes), getting test interface... OK
Model L7
Firmware R4517_G_08.C4.1ER
Reading info OK

coz before i try one L7 iTUNE but it's unlock with smart moto but when i turn it ON only key pad light On and after some second OFF.............

so i dont wana try again in this set.:(


if some one have any idea about this share with us.

waiting REPLY


take care

[foo_men]

I try with C261, and appears it,

Entring FlashMode...
Please press power ON button...
Syncronization with MCU OK...
MCU ID read OK...
Sending loader signature...
Loader signature accepted...
Sending loader...
Loader accepted...
Syncronization with loader...
Syncronization with loader OK...
FlashMode Active...

so, when i put unlock, apears

Loader initialization...
Reading loader revision...
Reading EEPROM 0x29 block subsidy lock state...
SPI initialization...

Can somebody help me? or tell me what´s going wrong?

[luzer]

Firmware version unsupported ...

[foo_men]

Sorry...
then apears it:

Unlocking phone...
0x29 BLock unknow state...
Unlock phone error...
Disconnected..


and then...doesn´t unlock the phone

do i need something more?

[foo_men]

this is the SW version:

001B0132
608231863954
Who: sw_cm

sw Ver:0.1.32
15-DEC-2005

Flash: N/A
Code. 90.01
Boot.90.05
FMGR.90.39
FLEX_90_61_B447
LangPack:LPLA_0132

somebody has unlocked something =?

[Ashwani Gaur]

what is the result in NUTSHELL.????

IS THIS SOFT WORKING OR NOT ??????

[Tr0nAd0r]

what is the result in NUTSHELL.????

IS THIS SOFT WORKING OR NOT ??????

Working only in 10% of old C261 phones
0% of new phones

And it will no have updates :D :D :D

[foo_men]

ok, i´ll put it in a trash basket jajajaja

[XU GSM]

but it's work for c115 and c117 very well
wbr

[pchelpsi]

I try to unlock this phone and something strange happened.

It goes like this:
Entring FlashMode...
Please press power ON button...
Syncronization with MCU OK...
MCU ID read OK...
Sending loader signature...
Loader signature accepted...
Sending loader...
Loader accepted...
Syncronization with loader...
Syncronization with loader OK...
FlashMode Active...
Loader initialization...
Reading loader revision...
Reading EEPROM 0x29 block subsidy lock state...
SPI initialization...
Loader initialization OK...
Unlocking phone...
Reactivating 0x29 BLock...
Reactivating 0x28 BLock...
Phone Unlocked...

I try a few seconds, nothing happened, so I pull out the cable and now when I turn ON the phone, when the HELLOMOTO shows on the screen, fhone freeze and an message shows on the screen:

CPU
ExceptionSYS_TA
SK


Anyone has an idea how to fix that?

Thanks in advance for any help, suggestion or answer.

BR

[Tifon]

I tried with v177, compaq tool says phone unlocked, but when i put sim card it asks for subsidy password...

[djafter]

Mrs...
the errors that the USB-Smart_Compal_Tool shows..in the c261.. they are related to the flex version that it has telephone. changer by a compatible with the telephone and they will not have but errors with the unlocked...

[gokul2005]

any One Have Flashfile C261 For Hang And Reboot

no need to flash just connect the phone in compal tool an press erase ffs. after this phone will be ok

[trongtin]

This Program tested???:D

http://rapidshare.de/files/22423036/Compal_Tool.zip.html

Compal_Tool.zip don't working c261 motorola

[doberman]

and it dosent work on motorola V177 from Spain .

[chyned]

so which software unlocks new models of c261?

[piracik]

there is no 100% sw infinity is the best but even infinity doesn't unlock all ODM's

[pchelpsi]

About your problem, where phone goes on and after a while, it turn off.

It happened to me also and here is the solution. Just made a testpoint before you connect the battery. You will se it will work.

After that you will be able to do with the phone what ever you want, unlock, flash, etc...

BR,
Dejan

[ztelecoms]

hi there....

i have mot c257, i do openline using unibox and the software is compal tool but no luck, is says entering flash mode, please press power on botton, but nothing follows, just time out..... any body could help me this problem? is compal tool compatible with unibox? thanks

[landri]

I tried with v177, compaq tool says phone unlocked, but when i put sim card it asks for subsidy password...
dear sir;
i always have erro message when i try to open compal tool 12 . error in winscard.dll can u helpe me pls
tank uto answer me

[zipzap_kill]

please give me crack software ok quick
thanks in advance

[cchop99]

:) This software rocks... Weeks upon weeks of research finally paid off.
I used this software along with the c115A cable and voila!! unlockedddd

Dont know if this helps, but I disabled my virus programs just in case...

Thanxxxxx

[nora4]

thanx fore you man
v177 not worek

[sharmin]

does the crack can unlock c118/c261/c157??? pls dont confirm here without test...

[sharmin]

Pls upload the USB-smart Compal_Tool_v12.exe Cracked here . rapid share is too much busy. it will be helpfull for all. thanks

[JohnLiew]

I have tested the software as follow, but it still locked and requires subsidiary password!!!

Entring FlashMode...
Please press power ON button...
Syncronization with MCU OK...
MCU ID read OK...
Sending loader signature...
Loader signature accepted...
Sending loader...
Loader accepted...
Syncronization with loader...
Syncronization with loader OK...
FlashMode Active...
Loader initialization...
Reading loader revision...
Reading EEPROM 0x29 block subsidy lock state...
SPI initialization...
Loader initialization OK...
Unlocking phone...
Reactivating 0x29 BLock...
Reactivating 0x28 BLock...
Phone Unlocked...
Disconnected...

[sajib_ngage]

my c261 show enter unlock code what can be done????????

[smith000monday]

Yes WORK fine!Tested on v220

[infozohaib]

hi dear,


before reply search in forum L7i Tune not moto platform. so how can u say what

It happened to me also and here is the solution. Just made a testpoint before you connect the battery. You will se it will work.

After that you will be able to do with the phone what ever you want, unlock, flash, etc...

do'nt reply like that

take care


About your problem, where phone goes on and after a while, it turn off.

It happened to me also and here is the solution. Just made a testpoint before you connect the battery. You will se it will work.

After that you will be able to do with the phone what ever you want, unlock, flash, etc...

BR,
Dejan

[excelpass]

can v171 simlock open ?

[spyer]

can v171 simlock open ?

no it can't unlock this model.

[leo198x]

thanks ! !!!!!!!!!!!!!!

[tega]

Please site is block could you assist me with software to my e-mail,''leetech_ng@yahoo.com '':) or give me access.

Thanks

tega

[llcoolr]

not working on c261
is there any way to unlock it except infinity ???????

[brogdan]

any new link? old link brocken! not working!

[::.::RAMJAN::.::]

@llcoolr
261 working


Entring FlashMode...
Please press power ON button...
Syncronization with MCU OK...
MCU ID read OK...
Sending loader signature...
Loader signature accepted...
Sending loader...
Loader accepted...
Syncronization with loader...
Syncronization with loader OK...
FlashMode Active...
Loader initialization...
Reading loader revision...
Reading EEPROM 0x29 block subsidy lock state...
SPI initialization...
Loader initialization OK...
Unlocking phone...
Reactivating 0x29 BLock...
Reactivating 0x28 BLock...
Phone Unlocked...

[llcoolr]

@ramjan

seem that is working but only for some versions
i got to find solution excpt infinity

[bilal shah]

this file iz deleted from ur rapidshare so give us another link
thanx

[adypet1]

Some version of c261 & v177 can't be unlock with compal tool or infinity.

[davoxrg]

file not found pls upload :S

[.::PATEL TELECOM::.]

This Program tested???:D

http://rapidshare.de/files/22423036/Compal_Tool.zip.html

file not found plese upload new link
thanks

[Peggy2002]

the files are not found on these links.
somebody help?

[segun01]

i after downloding, when i want use d response cannot find usb-smart while d smart is inserted .pls some help kindly tell me what to do

[RAMJAN_MOBILE]

@llcoolr
c261 not working infinity

COM1 selected
"smart write" active
Action: unlock
Device: C261
Checking data, wait...
Connect...
Press and HOLD Power button...
Connecting...
initial boot phase complete
Release Power button !
Connect Done
Boot...
Boot Done
Set Baud...
115200
Set Baud Done
Check Flash-1...
SW version: 0.1.32
HW version: MOTOROLA_E58S
LP ver: LP1_0132
Flex ver: FLEX_90_64_4H08
cpu id: 08B6
imei eeprom: 35860500606837
sp-locked: 23410.
Check Flash-1 Done
Check Flash-2...
reading ...
file saved: Backup_eeprom_calibration_35860500606837_2007-2-20_17-49-33.34E.bin
Err: this unit can't be unlocked, error#1
Check Flash-2 Fail
Finished, time used: 21 sec
Remove/Install battery now !

[dayo_duffryder]

Pls d rapidshare link is not working to usb-smart compact_tool_12.exe cracked, pls post another link

[Afzaal]

RAMJAN_MOBILE
@llcoolr
c261 not working infinity

COM1 selected
"smart write" active
Action: unlock
Device: C261
Checking data, wait...
Connect...
Press and HOLD Power button...
Connecting...
initial boot phase complete
Release Power button !
Connect Done
Boot...
Boot Done
Set Baud...
115200
Set Baud Done
Check Flash-1...
SW version: 0.1.32
HW version: MOTOROLA_E58S
LP ver: LP1_0132
Flex ver: FLEX_90_64_4H08
cpu id: 08B6
imei eeprom: 35860500606837
sp-locked: 23410.
Check Flash-1 Done
Check Flash-2...
reading ...
file saved: Backup_eeprom_calibration_35860500606837_2007-2-20_17-49-33.34E.bin
Err: this unit can't be unlocked, error#1
Check Flash-2 Fail
Finished, time used: 21 sec
Remove/Install battery now !


Some f/w Are Not Supported by Infinity thats All.
maybe in near Future they will also add them
Cool!