View Full Version : Motorola 168 After Flash DEAD
aukonline
07-04-2006, 19:34
Today i recived moto 168 in phone code , then i unlock show code 1820 when i inter code show (incroct code) . then i flash to try show this ....
COM6 selected
Device: C168
Checking data, wait...
Action: Flash write
Write: Firmware
Write: Flex
Write: Language Pack
Skip: FFS/File system
Write: Images
Write: Melody
Smart Write active
Boot...
Phone should be Switched OFF !
Press Power button now !
Connecting...
Boot Done
Check Connection...
Check Connection Done
Set Baud...
Set Baud Done
Check Flash...
SW ver: 1180-000
HW ver: TCT-7-
Check Flash Done
Check Parameters...
Check Parameters Done
Check Space...
Flash: 0089:886400010001
Check Space Done
Check Data...
Check Data Done
Erasing...
Erasing Done
Writing...
Write: Firmware
Flash: 0089:886400010001
try to recovery erase error
[43]
try to recovery erase error
[5D]
try to recovery write error
[00:45:00000000]
Writing Fail
Finished
Remove/Install battery now !
Time used: 30 sec
moto is dead i also Read backup But How we can write Backup file ?
InfinitySupport
07-04-2006, 22:26
Hi,
Download latest Moto02 v1.14 from support area and try again.
Also for info: flashing main+lp+flex+images+melody dont have any effects for removing phone code.
aukonline
07-05-2006, 16:39
COM5 selected
Device: C168
Checking data, wait...
Action: Flash write
Write: Firmware
Write: Flex
Write: Language Pack
Skip: FFS/File system
Skip: Images
Skip: Melody
Smart Write active
Boot...
Phone should be Switched OFF !
Press Power button now !
Connecting...
Boot Done
Check Connection...
Check Connection Done
Set Baud...
Set Baud Done
Check Flash...
SW ver:
HW ver:
Check Flash Done
Check Parameters...
Check Parameters Done
Check Space...
Flash: 0089:886400010001
Check Space Done
Check Data...
Check Data Done
Erasing...
erase operation not required
Erasing Done
Writing...
Write: Firmware
Flash: 0089:886400010001
Err: error flash command
try to recover erase error#43
(Same Condition)
aukonline
07-05-2006, 18:20
Sir i read backup .But How we can write backup my Dead moto 168 pleaz Help me ?
InfinitySupport
07-05-2006, 18:49
Hi,
it's not a problem with backup or wrong firmware or something like this.
The problem is: flash can't be written.
I don't know the reason for sure but my advice: open phone, check flash chip. maybe water, maybe need to rehot it. Of course it can be something else but can't imagine right now what it can be.
It's really strange that readed phone code was wrong. also very strange that phone can't be flashed so I think there is a reason to check hardware.
GSM PAVIA
07-10-2006, 23:59
i have the some problem i don't know what i can do plz this is flash procedure
COM5 selected
Device: C168
Checking data, wait...
Action: Flash write
Write: Firmware
Write: Flex
Write: Language Pack
Skip: FFS/File system
Skip: Images
Skip: Melody
Smart Write active
Boot...
Phone should be Switched OFF !
Press Power button now !
Connecting...
Boot Done
Check Connection...
Check Connection Done
Set Baud...
203125
Set Baud Done
Check Flash...
SW ver:
HW ver:
Check Flash Done
Check Parameters...
Check Parameters Done
Check Space...
Flash: 0020:8810FFFFFFFF
Check Space Done
Check Data...
Check Data Done
Erasing...
Erasing Done
Writing...
Write: Firmware
Flash: 0020:8810FFFFFFFF
try to recovery write error
[00:54:00000000]
try to recovery write error
[01:5D:00000000]
Err: no any answer
Writing Fail
Finished
Remove/Install battery now !
Time used: 39 sec
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!:confused:
Try to reflow the flash and use fully charge battery..
WBR
Surej
SoftSkiner
07-13-2006, 23:22
exacltly same problem here
battery was full charged
phone 100% was ok
now phone dead in prepare
Writing...
Write: Firmware
Flash: 0089:886400010001
Err: error flash command
try to recover erase error#43
pls need fix that problem as soon as possible
best regards
:(
If all here after flash phone dead please try to flash deferent version.Here I use version _1280_ all files (main, flex, lp, mel and amage the same _1280_)
Loading file [version 02]...
C168_Main_7-1280-000_2006-Feb-22.69M.bin Loaded
Loading file [version 02]...
C168_Flex_1280-007_T676FC_8V33_V1.69F.bin Loaded
Loading file [version 02]...
C168_LP_1280-005_T676FB_8V33_V1_En_Cn_Ml.69P.bin Loaded
Loading file [version 02]...
C168_Melody_1280-004_T676EW_8V33_V1.69G.bin Loaded
Loading file [version 02]...
C168_Images_1280-004_T676EW_8V33_V1.69G.bin Loaded
InfinitySupport
07-15-2006, 20:02
Hi to all,
C168 flashing will be double checked ASAP !
shafnashaji
07-26-2006, 19:24
Iam also having the same problem Pls help me too....
Here is my log
COM1 selected
Device: C168
Checking data, wait...
Action: Flash write
Write: Firmware
Write: Flex
Write: Language Pack
Skip: FFS/File system
Skip: Images
Skip: Melody
Smart Write active
Boot...
Phone should be Switched OFF !
Press Power button now !
Connecting...
Boot Done
Check Connection...
Check Connection Done
Set Baud...
Set Baud Done
Check Flash...
SW ver: 1280-000
HW ver: TCT-7-
Check Flash Done
Check Parameters...
Check Parameters Done
Check Space...
Flash: 0020:8810FFFFFFFF
Check Space Done
Check Data...
Check Data Done
Erasing...
erase operation not required
Erasing Done
Writing...
Write: Firmware
Flash: 0020:8810FFFFFFFF
Err: error flash command
try#1 to recover erase error#43
Err: error
try#00 to recover write error at 00000000
Writing Fail
Finished
Remove/Install battery now !
Time used: 129 sec
Actually aim posting this for third time pls help me to recover my phones, I have two phones same error....
InfinitySupport
07-26-2006, 19:43
Please, send me full log file to InfinityHelp@yahoo.com.hk
therocky8
12-02-2006, 19:55
plz flash with the version of 1490 main+flex+lp+image +tones the problem will be solved
therocky8
12-02-2006, 19:57
i had solved the problem of pack error with the help of these files