PDA

View Full Version : @@@ C72 Unlock 10000% @@@

zine
07-08-2006, 03:30
NO NEED ANY BOX
1: USE x65PapuaUtilsV075
2: USE TEST POINT SAME C65 OR CX
3: GO TO "FLASH" CHOOS " pause + replace 76.5008.5009.5077
4: DO JOB
5: after ok UR PHONE IS UNLOCKED
WARNNING MAKE BUCKP EPROME FIRST
FullFLASHgSMPH
07-08-2006, 04:41
again thanks for the usefull info
Bohosh
07-08-2006, 09:38
Maybe this is old news for 95% of members of this forum !!! ;)
DMD
07-08-2006, 11:07
Yep old news has been posted multiple times already

Regards D.
SALNAI
07-08-2006, 11:21
NO NEED ANY BOX
1: USE x65PapuaUtilsV075
2: USE TEST POINT SAME C65 OR CX
3: GO TO "FLASH" CHOOS " pause + replace 76.5008.5009.5077
4: DO JOB
5: after ok UR PHONE IS UNLOCKED
WARNNING MAKE BUCKP EPROME FIRST

very thank's sir ZINE you are the best

best regards from SaLnAi
.:MESSAD_RA:.
07-08-2006, 11:34
thanks for help man........................
cora
07-08-2006, 11:43
NO NEED ANY BOX
1: USE x65PapuaUtilsV075
2: USE TEST POINT SAME C65 OR CX
3: GO TO "FLASH" CHOOS " pause + replace 76.5008.5009.5077
4: DO JOB
5: after ok UR PHONE IS UNLOCKED
WARNNING MAKE BUCKP EPROME FIRST

is this procedure aplicable to all versions of c72?
shohag
07-08-2006, 12:05
all version can unlock or not................
plz help me about this.............
Bohosh
07-08-2006, 12:08
Of course all version u can...by TP !!!
And not only C72....all S-Gold based phones!!!
bydetay
07-08-2006, 12:36
fw16 c72 unlock ok but fw22 unlock not okey papuas not reader otp ımei
elkirf
07-19-2006, 11:50
my c72 wont connect and it doesn't power on. what do i do?
FullFLASHgSMPH
07-19-2006, 12:18
Yep old news has been posted multiple times already

Regards D.


SO WHERE IS THE NEW ONE

NR
gunbee
12-05-2006, 09:36
thank you zine!
my c72 unlocked
sw:22
your method is so good!
x65PapuaUtilsV078
colepipo
12-06-2006, 07:11
Where can I get x65PapuaUtilsV075. Can anybody post a working link? I have used the serch button but i've not been lucky.
Afzaal
12-06-2006, 07:42
...............Updated.......... (http://rapidshare.de/files/21058300/x65PapuaUtilsV079e.rar.html)
BR.
vanhh
01-11-2007, 12:39
Press Red key !
Autostart...
ÜTransfer Boot...
BOOT geladen...
Pause 2 Sec...
Getting Information.....
FlashID: 0001,227E (268435456Mb)
C72 SIEMENS 357364????????
HASH: 740DF1C8FB53301DBEF0D740F36E0091
OTP ESN: 72ED2817
OTP IMEI: Not recorded or incorrect!
Fehler mit dieser Geschwindigkeit 57600 Baud!


It can't unlock my fone, phone disabled SUBSET CODE, i'm use PapuaUtils v0.9.1a.exe.
OLYMPIOS
01-12-2007, 14:02
plz anyone to upload this new program the old
ling its no work
visionmaster20
04-18-2007, 19:50
NO NEED ANY BOX
1: USE x65PapuaUtilsV075
2: USE TEST POINT SAME C65 OR CX
3: GO TO "FLASH" CHOOS " pause + replace 76.5008.5009.5077
4: DO JOB
5: after ok UR PHONE IS UNLOCKED
WARNNING MAKE BUCKP EPROME FIRST

thank you very good solution 100%:) :) :)
Temp.
05-02-2007, 13:08
NO NEED ANY BOX
1: USE x65PapuaUtilsV075
2: USE TEST POINT SAME C65 OR CX
3: GO TO "FLASH" CHOOS " pause + replace 76.5008.5009.5077
4: DO JOB
5: after ok UR PHONE IS UNLOCKED
WARNNING MAKE BUCKP EPROME FIRST

eeprom back with x65 flasher ?
right?
ruwanjk
04-16-2008, 17:00
try this link
http://www.esnips.com/doc/85306d41-9de6-4ccd-8c11-b50f960124df/x65PapuaUtilsV079e
khankhaje
08-25-2008, 17:42
hi
can I use DCA-540 Cable to unlock my SIEMENS C65 phone?
Gehstock
08-25-2008, 18:28
Yes -> Midlet method
Anate
01-29-2009, 15:09
NO NEED ANY BOX
1: USE x65PapuaUtilsV075
2: USE TEST POINT SAME C65 OR CX
3: GO TO "FLASH" CHOOS " pause + replace 76.5008.5009.5077
4: DO JOB
5: after ok UR PHONE IS UNLOCKED
WARNNING MAKE BUCKP EPROME FIRST

hello zine been trying to unlock my siemens c72 but get error like this:
no answer from phone,
check phone mode
Auto ignition...
No answer to boot load ..!!!!!!!!!

please give stepby step proceedure to unlock this phone. where do i connect testpoint to??

please reply now

thanks
dagos
01-29-2009, 17:48
hello zine been trying to unlock my siemens c72 but get error like this:
no answer from phone,
check phone mode
Auto ignition...
No answer to boot load ..!!!!!!!!!

please give stepby step proceedure to unlock this phone. where do i connect testpoint to??

please reply now

thanks
...on this forum is posted manny, manny times "How to" unlock S-Gold phones using papuautils software. Supplimentary you need to use the Service cable, like serial DCA500 or C55 data cable; DCA510-modifyed (insered two 10 Kohms resistors between pin 5, pin 7 and pin 2).
See bellow one example:
...open X65papuautils. NOT ENTER IN SERVICE MODE!!! Go to the "Codes" menu and if you have the original SKEY, write in this case. If not, write any 8 numbers in this case. Go to the "Flash" menu and check only "Pause", "??????OTP" and all options in "Recalculate Keys" (if you check this option, automatically is checked the other three options). ONLY THIS PRESENTED OPTIONS NEEDED TO BE CHECKED, NOTHING ELSE!!!!
Click on "Do the Job!" connect testpoint, push shortly phone Power On button, disconnect testpoint (see message -> three seconds to disconnect it), and wait to finalyse ( between reading and writing eeprom segments will have pause somme seconds -> not disconnect). The final message will be : Close all connections...
That is...
dagos
jatjag
01-31-2009, 09:54
When I try with this method it says error in end saying cannot replace field 5008.My c72 s.w version is 22.I tried with x65PapuaUtilsV079e,x65PapuaUtilsV111b & x65PapuaUtilsV075.What should I do?Please help
dagos
01-31-2009, 10:50
When I try with this method it says error in end saying cannot replace field 5008.My c72 s.w version is 22.I tried with x65PapuaUtilsV079e,x65PapuaUtilsV111b & x65PapuaUtilsV075.What should I do?Please help
...this methode is used after fullflash with changing bootcore or if locked phone doesn't start normaly. If your phone start normal, use method with the Java midlet calculation.
Field 5008 is the field for "Phone Lock"...
dagos