View Full Version : A31 test point not work !
phonetool
07-17-2006, 11:49
testpoint mode not work
other mode work ok
show : working....
.
with DBSS 1.24
.
.
.
need repair it.
thanks
DreamSupporter
07-17-2006, 12:21
testpoint mode not work
other mode work ok
show : working....
Which other mode is work?
phonetool
07-18-2006, 04:10
cut track mode
stored boot key mode
work good
phonetool
07-18-2006, 04:51
ok
i Connect testpoint to phone pcb TP
DBSS not work
Always show “working....‘
i cut phone pcb and use "cut track" mode
DBSS work ok
can repair flash and unlock.
my testpoint work ok with other phone (c60...)
thanks
GSM Dream
07-18-2006, 14:42
To phonetool
Did you modify your testpoint cable ?
PhantomGSM
07-19-2006, 17:33
@GSM Dream
for us slow ppl, what marking does the 150pf capacitor have on its body ?
I only ask as figuring out capacitance value markings is a pain in the butt :D
WBR
p.s thanks for helping with the firmware update ;) now box working fine.
May be im wrong...But TP mode NOT work with a31 that has ST flash chip on board :-(...But work without problem with AMD (Spansion) chip :-) ??
phonetool
07-20-2006, 08:21
my cable added 150pf.
There was a same problem. And the same for some other models E-Gold.
But all is solved simply. It appears, if to take ext. power from Dreambox so it is possible to wait indefinitely with an inscription wait. :) If to take + and - from the accumulator (I used crocodiles) all will earn at once.
Good luck. ;)
phonetool
07-25-2006, 07:01
.
.thanks
.