View Full Version : MT-30 and MT-35i how to unlock?
Hi,
I need help on how to unlock Mitsubishi MT-30 and MT-35i. I tried Mitsubishi Unlocker 4.0 by Troky but was not able to unlock it. Anyone successfully unlock the said phone using this soft?
Or is there a pure cable solution for this type....
Regards,
neb
DrMobile
08-02-2002, 14:35
I also need to unlock above phones. please anyone can send me solution to unlock above phones.
Best Regards,
Dr. MObile
Preparation:
Open the phone
desolder The EEprom 25642
Read it with PonyProg or some other programmer.
Solder wires in the place of the EEPROM, and out of the phone connect the wires to the 8 pin socket.
Put the EEPROM 25642 in this socket, and switch on the phone
The phone must start working as if the EEPROM is into the phone
Thats way You have easy moving (of the EEPROM) between the phone and the programmer.
Unlocking:
The SIM Card must be in the phone all the time
Read the EEPROM and save it to ORG.bin
at the address 1124 You find 695C
clear it (instead 695C write 0000)
Write the EEPROM
Switch on the phone and wait (the phone will give some message for "Contact Provider")
Switch off the phone
Read the EEPROM (You will find a lot of changes) and save it to FORMAT.bin
Copy from ORG.bin (from addres: 1133 to address: 11BE) to FORMAT.bin (the same address) and save it as UNLOCKED.bin
Write UNLOCKED.bin to the EEPROM
Switch on the phone
and voila - the phone is unlocked
w B.R. from Lemberg
Hi!
Use Mitsubishi Unlocker 1.99 by Troky (Public Version)!
Work fine!
B.r.
:) ;) :)
No need 100 wires and another funny method!!!!!
Only desolder the eeprom, read this and unloch with Free eprom 4.x like MTD30!!!
Put eeprom back and be happy!!!
Good luck!!!
Cris
plz send me Free eprom 4.x like MTD30
)))
Use net and search button and "Lovelas free eeprom 4.0"
and try...http://usuarios.lycos.es/viared/pa_entro/moviles/moviles.htm
http://www.awalphone.com/Loren/Mitsubishi_By_Troky_v4.zip