PDA

View Full Version : x660 hangs on startup

mmcr
07-31-2006, 09:33
can anybody help me with this problem, flashed phone on ust pro 2, still hangs on startup logo, can't even switch the phone off, so it's not the keypad, software is fine, what could it be? if you have an idea, please let me know :confused:
olajosadri
07-31-2006, 19:53
Hi. I have this problem too... Pls help
THX
phuongnam
08-12-2006, 11:20
i am so ,do U have solution ?
Monty
08-24-2006, 23:34
I have this same problem
...but try to disconnect small internal baterry (for a 5 minutes)
Maby it will help. Sometimes it's help...
CHAPRAN
08-25-2006, 10:09
i have 3 nos help me too
c_ahmad79
08-25-2006, 23:06
did you try to flash your phone...................?
Monty
08-25-2006, 23:13
did you try to flash your phone...................?

Yes. I did it.
It was flash with X660XXEJ7_s3.s3 and Opti Flash.
Nothing change.
Anything else ??
wangfeihong
09-18-2006, 05:35
Its a hardware problem. Try changing the OSC202, OSC701 and OSC301 one by one.
Monty
09-18-2006, 23:57
do you have some scheme ???
wangfeihong
09-20-2006, 03:26
http://gsm-magic.com/ArchitRaj/Schematics/Samsung/

Here the link i get frm this forum fr samsung schematic. x660
Monty
09-20-2006, 23:47
WOW!!!
What a huge gallery :)

BIG THANKS!!
c_ahmad79
09-21-2006, 07:33
http://gsm-magic.com/ArchitRaj/Schematics/Samsung/

Here the link i get frm this forum fr samsung schematic. x660
too good........................ thanks for this helpfull link........
NELU-GSM
09-22-2006, 10:00
can anybody help me with this problem, flashed phone on ust pro 2, still hangs on startup logo, can't even switch the phone off, so it's not the keypad, software is fine, what could it be? if you have an idea, please let me know :confused:

i had same problem, if you have nsdongle download x660full.sre and write to phone,will solve 100% your problem.
tm-gsm
10-09-2006, 11:18
i have also problem with this phone, hangs on startup, can u sned me file to repair this phone?
Monty
10-09-2006, 18:32
can you send me this file??
or give me link to this...
Thanks
amir&melika
11-07-2006, 22:18
i have a x600 with this problem plz help me
dizzu
11-10-2006, 20:36
Remove keypad varistors and replace mic.

Tested 100%
AlgMUR
12-20-2006, 14:14
hello
i can't get access password required, any one know the pass.
adnanali
12-20-2006, 14:20
replace resistor not capicter from front pad 9 in no ok