I2C cable still problem !!!

[makona]

hi, <br />i asked here before about this cable and some friends told me to try with another pc ( did that ) .. also tried with pony-prog choose easy i2c .. tried with ic-prog ...<br />all same results ..<br />didn't work with my samsung 2200 ..<br />only worked with samsung N100 ..<br />and worked with sgh-600 too sgh600oul.exe ..<br />but with 2100,2200,2400 .. <img src="frown.gif" border="0"> ((

whats wrong with this !!<br />if there any other method to unlock this phones easier than eeprom solution .

[AgA]

Hi!!

Like i see you missunderstand my words a little.. <img src="wink.gif" border="0">

If I2c it´s serial port cable it never can work like Easy I2c on parallel port Pony setting.

Configure like SI prog I/O on com 1 and all unchecked.

If still don´t work you must change your cable for other one. Take schematic of easy I2c(www.LancoS.com) and put gnd, scl and sda on <br />correct connector pins. Now you have to use Lpt1 Easy I2c Pony configuration.

If still don´t work mail me private.

B.R.<br />AgA