View Full Version : Who wants to help!!!
I need any solution to unlock SAMSUNG SGH810.Thanks a lot!
Dubpoison
05-15-2001, 11:21
Of course man...all you need is read the eeprom with the I2cBus Cable used for unlock sgh600...device is 24C128. After this edit the dump, find the adrres line 1B0 you must find something like this:
1b0: xx xx xx xx xx 22 02 xx xx xx xx xx xx
change for:
1b0: xx xx xx xx xx 22 02 00 00 00 00 00 00
and write the file again to the phone, restart it and unlocked.For read & write eeprom phone must be On.
Regards
DUBPOISON
hi Dubpoison,
can you tell me more about this cable.o had never unlocked a Samsung after two years unlocking
:( :(
Dubpoison,thank you for your help.Could you send me the schematics and pinout for that interface and did you ever try or did you unlocked any Samsung 810.Thank you very much!
Bigbrothers2000
05-16-2001, 14:31
to Dubpoison
hi man i use cable for unlocking sgh600
but the same cable can not read eeprom
i use ponyprog and use Ic2 in setup
but is not reading ??
what must i do
use another prog then ponyprog ???
thanks
Hi all
For unlock SGH500 and SGH600 I use only keyboard.
Regards
Pano :D :D :D
Dubpoison
05-17-2001, 13:13
Hi!
You can find scheme here : http://multicentro.com/movilhome/cables/samsung_cable.htm
In Ponny prog setup menu you must set: Serial, SI Prog IO, and com port. Device Type of sgh810,sgh2100,2400 is 24c128. After this power on the phone, connect the cable and you can read & write eeprom.
Regards
DUBPOISON