<<<FREE Blackberry unlock solution for NsDongle and NsPro customers>>>

[Elco]

ns-Blackberry logger released!!!





Each NsDongle and NsPro box ID was credited with 2 free BlackBerry logs.

To use Blackberry logger, go to support area and you will see user/pass for logger and link to download logger software.

User/pass are different for each box ID.

Supported Blackberry* Phones:

BlackBerry 71xx Series : 7100g, 7100g, 7100i, 7100r, 7100t, 7100v, 7105t, 7130e
BlackBerry 72xx Series : 7230, 7250, 7280, 7290,
BlackBerry 75xx Series : 7520,
BlackBerry 77xx Series : 7730, 7750, 7780,
BlackBerry 8700 Series : not supported
Unlock BlackBerry 5xxx, 6xxx, 7Xxx
Using standard blackberry USB cable (as supplied with phone)

Phones not supported: X700, 7510 (iden), 5810, H700

* Blackberry firmware must be 4.x and up, No password protected!



Instructions:

1. Please install the driver first before connecting your blackberry
2. if you have blackberry connected before, it usually use standard driver so please replace with our Jungo driver.
you can do this from control panel>system>device manager
3. start the ns-blackberry.exe
4. enter your id and password
5. we recommend you test the server connection first
6. click unlock the phone and the unlock code will be shown
7. for those who dont know the procedure to enter the code back to the phone, please read the instrucion below

Make sure phone is upgraded to latest 4.x firmware. You can check this by going to options>about settings

If not, please visit www.blackberry.com to download latest version for your phone model.

Please remove/disable password from the phone. If password is forgotten, enter the password wrong 10 times will reformat the phone. ALL DATA IS LOST!

Please check if the phone has security policy, usually this is because the phone is setup up to operate with Blackberry Enterprise server. Please remove the security policy

Now you are ready to unlock the phone
Connect the phone to the pc and click read the code and it will show you the code.

Entering unlocking codes:
1 - Using the menu go to Settings Menu -> SIM card press select.
2 - While holding the SHIFT key, type “MEPD” or incase of 7100 “MEPDD”
3 - You should now see the five locking categories listed.
4 - While holding the ALT KEY, type “MEP2” or incase of 7100 “MEPP2”
5 - Release the alt key.
6 - You are now prompted to enter the Network MEP code (will also state how many attempts left)
7 - Enter the code
8 - Enter Return/Enter
9 - The device should then be unlocked


PS.
This is only the first promotion. Many other promotions will be available in the feature.
Stay close ;)

[venkay]

Hi

Elco good support and good work

thank you man

[ashvin]

i appreciate this one. thks

ashvin

[gsmshahrayar]

HI dear ELCO....
Thats great man........

Thanks

[unlockcellular2]

waw..u giving out 2 free credits?..that like 20000 credits ;)
good day for NS customer :D

[Elco]

waw..u giving out 2 free credits?..that like 20000 credits ;)
good day for NS customer :D

man... PLZ count again... you missed some numbers... They are just "alittle" more than that...

[Aamir_Zia]

i Will Wait for 8700 .
Its badly needed :)


Waiting for some more good news

[damabib]

thx bro u really coming up now will and post

[taopheek]

Thanks U Elco But Like Oliver Twist It Will Be Better As An Add On For Ns Customer Even If We Ve To Pay More, 2 Credits Will Only Make Us Crave For More, Thanks Anyway

[amigo_rk]

Is there a time limit to use these credits?

[clearcom]

very nice update

more power elco!!!

[gsmdoctorca]

From now on I have 4 devices to handle BB Phones,Two just from you ,Thank!

I have been collecting the boxes in GSM market. Every box is a masterpiece of you guys.Ns donlge ,Nsbox ,Ns pro,whatever else in the future will be add to my collections.Agreed with Taopheek,UFS is welcomed Interface by your customers.

BR

[upgrader]

hi elco this is a very big update to us and a very good news, because i want to buy furious gold just for the blackberry unlocking and now that you release it. i will definetely not furious now.... the question now is howmuch is the credit?

[Elco]

hi elco this is a very big update to us and a very good news, because i want to buy furious gold just for the blackberry unlocking and now that you release it. i will definetely not furious now.... the question now is howmuch is the credit?

Furious dont mean only blackberry. They have many more solutions there. You must see what you need and buy the solution that perfectly fit's for your needs.

Credit price is here: http://www.unlockcellular.com/Remote-Blackberry-Unlock/

[UnlockCellular]

Dear customer, please see announcement in the NS team forum because we offer special price for NS CUSTOMER. Very good price :)

Reseller welcome :)

[the new]

what is the problem when I trayed to test the connection to server !!!
it freez and can't do any thing !!!!
plizz tell me ns-dongle must be pluged when using server or simply use code that recive it from support !

[Elco]

kill the logger from task manager. Then try again.
Next time, for faster response, post HERE (http://www.nsdongle.com/forum/index.php/board,16.0.html)

[kapur_mangi]

very good and nice update I purchse NSdongle

[ringo]

i got connection error -4 on 7290..how to remove security policy?..or to verify if it's active
b.r.

[chowdary]

hi nsteam
no hard feelings but could u change the title of this thread please as this is not a free solution
br

[Elco]

hi nsteam
no hard feelings but could u change the title of this thread please as this is not a free solution
br

... it is free... for all NsTeam customers...That's why is on this section.

[chowdary]

hi
so it means nsdongle or nspro holders don't need to buy credits
or is it 2 free credits as mentioned in the beginning?
sorry to be pain
br

[gsm-iran]

hi everybady

thanks for info

thanks.....

[XU GSM]

Elco good support and good work

thank you man

[clerigo]

hello elco not found:
send file photo, thanks.

[verse1965]

hello elco not found:
send file photo, thanks.


i'm getting this same error all the time. Can some one avise on how to correct this?

Regards, JOHNNY.

[UnlockCellular]

make sure you check device manager to see if you succesfully install JUNGO driver :)
dont use the standard driver ok

[verse1965]

hello elco not found:
send file photo, thanks.

make sure you check device manager to see if you succesfully install JUNGO driver :)
dont use the standard driver ok

Ok, so I removed original drivers and installed jungo drivers manually by selecting path file's directory. Now it sees the blackberry but i'm getting an unlock error message:



I'm getting this error message while trying to unlock a Blackberry 7130 from Cingular. Software version v4.1.0.321.


Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Logs remaining: 2
Authentication successfull.
Checking upgrade client version...
Your client is up-to-date.
Reading phone info...
Detected phone model is: RIM 7100 Series Colour GPRS Handheld ()
----------Code calculation started: 2:10:14 PM----------
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication successfull.
Checking upgrade client version...
Your client is up-to-date.
Server is calculating code...
================================================== ========
Error reading code: Server reported error: This phone seem to be unsupported for now.


So, is it not support or do I need to do something different?

Regards, JOHNNY.

[irishclips]

7130 wont be supported i think
Its like the 8700, intel based

[verse1965]

7130 wont be supported i think
Its like the 8700, intel based


Thanks irishclips for your answer.
Can Nsdongle team comfirm this?

Regards, JOHNNY.

[FractalizeR]

Ok, so I removed original drivers and installed jungo drivers manually by selecting path file's directory. Now it sees the blackberry but i'm getting an unlock error message:



I'm getting this error message while trying to unlock a Blackberry 7130 from Cingular. Software version v4.1.0.321.


Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Logs remaining: 2
Authentication successfull.
Checking upgrade client version...
Your client is up-to-date.
Reading phone info...
Detected phone model is: RIM 7100 Series Colour GPRS Handheld ()
----------Code calculation started: 2:10:14 PM----------
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication successfull.
Checking upgrade client version...
Your client is up-to-date.
Server is calculating code...
================================================== ========
Error reading code: Server reported error: This phone seem to be unsupported for now.


So, is it not support or do I need to do something different?

Regards, JOHNNY.

Actually, 7130 must be supported. Contact your reseller please to check server logs. BTW, are you using latest client version? Solution was updated soome times ago to handle short unlocking codes.

[Elco]

hello elco not found:
send file photo, thanks.

PLZ read the instructions from official we site or from official forum. And fallow the instructions.

[yueyo]

BlackBerry 8700 and 7130 are the same intel.

[Multi-COM]

tested today on 7730 and works ;) thx

[kapadia]

thx mate ... very much appreciated

[sunrise gsm]

Hi i have got the codes for 7100g 9151127719017715 but i cannot enter it.
i go to settings, sim card then i see SIM Card : No Valid SIM Card
i don't know how to type MEPDD
i hold the shift key which i believe is on the left bottom key
if i am wrong correct me

[sunrise gsm]

could any one tell me where the ALT Key is on blackberry 7100g ?

[N/East Unlocker]

I got the same message too with a 7130v :(


Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Logs remaining: 2
Authentication successfull.
Checking upgrade client version...
Your client is up-to-date.
Reading phone info...
Detected phone model is: RIM 7100 Series Colour GPRS Handheld ()
----------Code calculation started: 13:53:18----------
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication successfull.
Checking upgrade client version...
Your client is up-to-date.
Server is calculating code...
================================================== ========
Error reading code: Server reported error: This phone seem to be unsupported for now.

[amigo_rk]

I have opened the support website using the support area link. I am not able to find blackberry logger user/pwd. Please help me find the link to blackberry logger.

Note : I have 3.15 software.

Thanks in advance

[Gsm2Extreme]

"Please check if the phone has security policy, usually this is because the phone is setup up to operate with Blackberry Enterprise server. Please remove the security policy "

How to check this???

[Gsm2Extreme]

could any one tell me where the ALT Key is on blackberry 7100g ?

ALT key = Half moon key or (Orange key) on the left side of keyboard below the A
CAP key = bottom right key (a.k.a., SHIFT key)

[halilibrahim]

d820 imei????????????????????? not repair help me turkeu

[Elco]

d820 imei????????????????????? not repair help me turkeu

Only NsPro can repair IMEI on D820. This feature is not available on NsDongle.

[amigo_rk]

Elco, please help !!


I have opened the support website using the support area link in the NSDongle software. I am not able to find blackberry logger user/pwd. I am able to see the tree structure of the folders where I can download firmware etc.

Please help me find the link to blackberry logger.

Note : I have 3.15 software.

Thanks in advance

[Elco]

Elco, please help !!


I have opened the support website using the support area link in the NSDongle software. I am not able to find blackberry logger user/pwd. I am able to see the tree structure of the folders where I can download firmware etc.

Please help me find the link to blackberry logger.

Note : I have 3.15 software.

Thanks in advance

PLZ contact me private to give me more details. Only owners of ORIGINAL NsDongle can use free BB logs.

[baomobile]

PLZ contact me private to give me more details. Only owners of ORIGINAL NsDongle can use free BB logs.

There is come out with the BB 8100 from T-mobile.Did you get one?

[amigo_rk]

Thanks ! Elco,

Please check your PM

[MPhoneClinic]

How to unlock 7290 handset locked??

so i can use Ns-blackbery to unlock the net lock


br

[Elco]

How to unlock 7290 handset locked??

so i can use Ns-blackbery to unlock the net lock


br

That's the ns-blackberry made for...

[Siemens man]

hi Elco
i have this problem allways. please help me
thanks a lot

hello elco not found:
send file photo, thanks.

[Elco]

hi Elco
i have this problem allways. please help me
thanks a lot

Have you installed jungo driver ?

[MPhoneClinic]

That's the ns-blackberry made for...

so can u tell me how to remove the handset code??


BR

[Siemens man]

elco there is jungo driver i can't see. please tell me url for jungo driver
thanks a lot

Have you installed jungo driver ?

[Elco]

elco there is jungo driver i can't see. please tell me url for jungo driver
thanks a lot

You can find driver installer in same archive with logger.

[Siemens man]

hi elco
driver very good installed, but after read unlock code. i have same problem. please help me, how resolve this problem
thanks a kot

Ok, so I removed original drivers and installed jungo drivers manually by selecting path file's directory. Now it sees the blackberry but i'm getting an unlock error message:



I'm getting this error message while trying to unlock a Blackberry 7130 from Cingular. Software version v4.1.0.321.


Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Logs remaining: 2
Authentication successfull.
Checking upgrade client version...
Your client is up-to-date.
Reading phone info...
Detected phone model is: RIM 7100 Series Colour GPRS Handheld ()
----------Code calculation started: 2:10:14 PM----------
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication successfull.
Checking upgrade client version...
Your client is up-to-date.
Server is calculating code...
================================================== ========
Error reading code: Server reported error: This phone seem to be unsupported for now.


So, is it not support or do I need to do something different?

Regards, JOHNNY.

[btl]

can you please tell me how to get to support area i dont have user name and password

[Siemens man]

if you have dongle or box? if yes. go to support section and can see free log name and pass
good luck
can you please tell me how to get to support area i dont have user name and password

[Siemens man]

thanks Elco
my 2 pcs 7100t and 7105t successfully unlocked
thanks a lot

[MPhoneClinic]

@Elco

check this log, can u help please

----------Code calculation started: 4:15:01 PM----------
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication successfull.
Checking upgrade client version...
Your client is up-to-date.
Server is calculating code...
Error reading code: Operation aborted

BR

[Elco]

PLZ check the version of your phone. Phone must be v4.x.x

[usernome]

Actually, 7130 must be supported. Contact your reseller please to check server logs. BTW, are you using latest client version? Solution was updated soome times ago to handle short unlocking codes.

7130 is same like 8700 aka intel platform based but cant know this by sniffing no ? :D

Br;)

[atiefoo-gsm]

do it for free because we are having it free on furious-gold

thanks:
kobby:D :D :D :D :D :D

[mashi]

how do i get my username and password ?

[Siemens man]

elco
please more free log for blackberry. furious gold is free............................

[Siemens man]

hi man
enter to support section and see...................
how do i get my username and password ?

[no1mobiles]

Ready.
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Server reported error: Authentication failed! Check your password. If it is ok - contact your resell
WHAT IS THIS???????????

[no1mobiles]

plz give me link for ns team forum.

[Elco]

plz give me link for ns team forum.

HERE (http://www.nsdongle.com/forum) is the link to NsTeam forum

[no1mobiles]

thanx Elco but hot to post on it???

[m:asafyry]

good work elco
but we need a soluotion for 8700 black berry i have at least 10 pc and no solution
br

[Elco]

HERE (http://www.nsdongle.com/forum) is the link to NsTeam forum

you have REPLY and NEW TOPIC button there. You can also enable quick reply from Profile section.

[no1mobiles]

thanx elco my problem solve know.

[Siemens man]

hi elco
how to unlock blackberry 6280?? tell me solution
thanks a lot

[chowdary]

hi
could anybody confirm that do NScustomers need to buy buy logs after they
used two free logs
if yes.... what is the price please
thanks
br

[Elco]

hi
could anybody confirm that do NScustomers need to buy buy logs after they
used two free logs
if yes.... what is the price please
thanks
br

check the official web page:

http://www.nsteam.org/products3.html

[no1mobiles]

elco i visit de official sit but no information there i send e mail but no repply can u help us with more information plz.

[Elco]

Read on the bottom of the page posted above. And you will see how to buy and the price.

[Siemens man]

@elco
hi man
i wan't buy more log. please tell me how send money via WU. tell me payment address
thanks a lot

[Elco]

@elco
hi man
i wan't buy more log. please tell me how send money via WU. tell me payment address
thanks a lot

PLZ contact unlockcellular for logs. He sell logs. I am only writing the software.I dont sell anything.

[Siemens man]

hi man
thank you for reply mail. this is server can not unlock blackberry 8700g and 6270, 6280
you can???

PLZ contact unlockcellular for logs. He sell logs. I am only writing the software.I dont sell anything.

[Siemens man]

hi man
please tell me. how to remove password for blackberry 7100g. now show in screen new PASSWORD. please tell me after update soft(flashing new version) password removed. or need unlock via server? help me
thanks a lot

[bobjani2005]

hi alll see there ns pro not spporeted z400 unlocked only flash huh and ust and ns pro 2 wich time spporeted ns pro long old model z400 ??????

[bhama_shah]

good support & good work

WBR
Bhamashah

[ALL4TELL]

Hello, i have a Blackberry 7230 and i have the unlock code but:

4 - While holding the ALT KEY, type “MEP2”

How i can type "MEP2" if "E" and "2" is same key???

[no1mobiles]

All4tell
Tipe It 2 Time 1 For E Then For 2.

[no1mobiles]

CHECK
http://www.ipmart.com/main/browse.php?next=myaccount_past_order&cat=1683
u will find logs there.

[linterna1]

can the server unlock blackberry pearl 8100???
please let me know

best regards
linterna1

[UnlockCellular]

sorry no pearl or 8700 or iden bb

[baomobile]

sorry no pearl or 8700 or iden bb
AND ALSO 7130C TOO...........................

[no1mobiles]

need flash for blackberry 7100 & 6280 v 4.1 plz

[Siemens man]

this is server can not unlock blackberry 8700g

[alex12]

i need a log for blackberry..............................

[karemriko]

Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Logs remaining: 2
Authentication successfull.
Checking upgrade client version...
Your client is up-to-date.
Error occured while reading phone info.
7290

[karemriko]

ples reconnect phone and tray again

[rolko_mobile]

I have done all this and not working. (can't enter menu)


Now you are ready to unlock the phone
Connect the phone to the pc and click read the code and it will show you the code.

Entering unlocking codes:
1 - Using the menu go to Settings Menu -> SIM card press select.
2 - While holding the SHIFT key, type “MEPD” or incase of 7100 “MEPDD”
3 - You should now see the five locking categories listed.
4 - While holding the ALT KEY, type “MEP2” or incase of 7100 “MEPP2”
5 - Release the alt key.
6 - You are now prompted to enter the Network MEP code (will also state how many attempts left)
7 - Enter the code
8 - Enter Return/Enter
9 - The device should then be unlocked


PS.
This is only the first promotion. Many other promotions will be available in the feature.
Stay close ;)[/QUOTE]

[Sbbarra]

help plsss...
i need a restriction code for my phone

cellphone: nokia 6280
imei : 351861019500750
provider: hutchison 3g UK

plss reply asap
thankshttp://forum.gsmhosting.com/ubb/frown.gif sbbarra@tiscali.it

[Elco]

ples reconnect phone and tray again

You must use JUNGO DRIVER provided with Ns-BlackBerry logger software. NOT OEM BlackBerry driver.

[.::Skylinks::.]

Have Problum with BlackBerry Logger when I click on Check Server connection then recieve this error

Ready.
Locating Emeralda server...
Server found.
Connecting to server...
Connection to server failed. Socket Error # 10060
Connection timed out.

Please Fix that problum Elco Thanks

[usernome]

You all must thank to hack3r2k (Furious) .
Anyway , good support ...

[:::GsmFather:::]

Contact me at raeesm@gmail.com i have solution for all blackberry 8xxx series and also good price for the logs of 5xxx 6xxx 7xxx series

[RAMJAN_MOBILE]

Elco nice support and good work

[Anamos]

how to do to know what is the version of the blackberry phone?

[.:ramtelecom:.]

hello elco;
i have an error when trying to unlock blackberry,there is it:
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Logs remaining: 2
Authentication successfull.
Checking upgrade client version...
Your client is up-to-date.
Reading phone info...
Detected phone model is: RIM 7100 Series Colour GPRS Handheld ()
----------Code calculation started: 16:53:12----------
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication successfull.
Checking upgrade client version...
Your client is up-to-date.
Server is calculating code...
================================================== ========
Error reading code: Server reported error: Client/Server protocol packet length is invalid. Please contact support team!

i post this error in nsteam official forum and i don't have a reply after more than one week,is there a solution for this??!!!
if there was not, just tell us.

[kifah]

Hi Elco this my second post please i use may free logs bat can`t get secses
i get thes masseg from the server

Ready.
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Connection Closed Gracefully.

i use may free logs wich i get from support area from may NSp.

i have one bb and need to tray is it esy to unlock this to bay the addon or not.

BR

[freewaycomms]

Hi Elco this my second post please i use may free logs bat can`t get secses
i get thes masseg from the server

Ready.
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Connection Closed Gracefully.

i use may free logs wich i get from support area from may NSp.

i have one bb and need to tray is it esy to unlock this to bay the addon or not.

BR

Hi there

I am getting the same error! Is the server misbehaving?

FWC

[UnlockCellular]

try again later
the whole server got slammed from version 2.0 released ..:) its good update but the server can not handle too many customer at the same time

[kifah]

try again later
the whole server got slammed from version 2.0 released ..:) its good update but the server can not handle too many customer at the same time

Thanks freind i will tray and tall you agein .

BR

[..::Sunil::..]

When I click on "Test Server Connection " Its showing error.



Ready.
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Connection Closed Gracefully.
Locating Emeralda server...

plz help me. Thanks in advance.

B.r.
Sunil.

[david247]

Is there any news with server,

Ready.
Locating Emeralda server...
Server found.
Connecting to server...
Connection to server failed. Socket Error # 10060
Connection timed out.

Or is this service over now? and time to upgrade to NS MULTI-UNLOCK,

Thanks David.

[Elco]

Try again now. Server is up and running.

[david247]

Kool who is selling logs for blackberry server.

Thanks David

[..::Sunil::..]

Now I am getting error plz help me.

http://img341.imageshack.us/img341/815/errornspropt4.jpg (http://imageshack.us)
:confused: :confused: :confused:
Thanks in advance.

B.r.
Sunil

[Badboysd]

same problem with me to Elco give us a hand here plz thx.

[Santana1907]

elco blackberry logger problem connection error ....7290 not calcuting please help

[ExTrEmE99]

Is there any new solution for Unlocking Blackberry Pearl or 8100 series?

[usernome]

i Will Wait for 8700 .
Its badly needed :)


Waiting for some more good news

Wait for hack3r2k to release it and then you will have 8700 ...

[tsarkh]

i got this error when i do test server connecttion:

Ready.
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Connection Closed Gracefully.
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Connection Closed Gracefully.

help here is needed

[gs cell]

many more thanks ns team

[tsarkh]

any answer for me over here i want to do it ???????

[Biryani]

Hi,

I have a question about my Blackberry Pearl 8100c...... just bought it yesterday and wanted to know how do I install new games in it........ any help will be greatly appreciated...... Thanks.

[rasel1576]

pls tell me blackberry pearl 8100 mped code.

[ronkor2000]

pls tell me blackberry pearl 8100 mped code.
LOL You'll have to visit a good unlocker. There is no universal code:D

[madstan]

ns-Blackberry logger released!!!





Each NsDongle and NsPro box ID was credited with 2 free BlackBerry logs.

To use Blackberry logger, go to support area and you will see user/pass for logger and link to download logger software.

User/pass are different for each box ID.




Sup everyone?

I checked out the support area to find the username and password for the logger and link to download the logger software but I was unable to find it.

Can anyone who knows the thread where this information is posted paste the link to thread here?

Thanks.

Additionally in this same thread I found a link the nsteam website and was able to download nspro v2.0.5. Not sure how helpfull this software will be to me if I dont have the jungo driver that I heard is needed to use these logger software. Could someone assist me with this please? I am new to the unlocking gsm phones but I recently purchased blackberry 7290 and would like to unlock it.

Thanks again in advance.

[oOXTCOo]

i have always the same error:


Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Logs remaining: 2
Authentication successfull.
Checking upgrade client version...
Your client is up-to-date.
Reading phone info...
Detected phone model is: RIM 7100 Series Colour GPRS Handheld (1.8.0.91)
----------Code calculation started: 21:04:55----------
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication successfull.
Checking upgrade client version...
Your client is up-to-date.
Server is calculating code...
================================================== ========
Error reading code: Server reported error: Client/Server protocol packet length is invalid. Please contact support team!








is there any other soultion, or may an new update of your server elco?

[maryajne]

Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Connection Closed Gracefully.
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Connection Closed Gracefully.
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Connection Closed Gracefully.


what is the problem of this..

[maryajne]

blackberry logger is nothing ..


Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Connection Closed Gracefully.
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Connection Closed Gracefully.
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Connection Closed Gracefully.

[Millo_6]

BUT WHAT THE HELL......

Server close my connection......Elco what's up???

[Heitor Wegmann]

Does anybody know how I can unlock my Blackberry Pearl that I bought from Cingular? Thanks.

[Brod Aries]

hi! i have here 7290 network blocked

after pressing MEPD the phone displays the ff:

SIM disabled
Network blocked
Network subset disabled
service provider disabled
corporate disabled

after doing step 4 & 5 nothing happens

4 - While holding the ALT KEY, type “MEP2” or incase of 7100 “MEPP2”
5 - Release the alt key

how can i fix this. please help!

[Deimantas]

How can i remove or reset handset code (it prompts "Enter Password" with sim or without sim card) on BlackBerry 7230? I can't get connected to the PC, software prompts for password too.

And what is the default user code (password) for these handsets? :confused:

Thanx in advance. :rolleyes:

[no1mobiles]

i am usinging NS MULTI i v been using it ever since & no problem i did unlock more than 30 phones but this is de first time i having this problem
7100i bb v4.xx no pasword prtected gives me :
black berry initialization
reading code
RIM 7100i SERIES iDEN hand hald.
plz help asap.

[Elco]

i am usinging NS MULTI i v been using it ever since & no problem i did unlock more than 30 phones but this is de first time i having this problem
7100i bb v4.xx no pasword prtected gives me :
black berry initialization
reading code
RIM 7100i SERIES iDEN hand hald.
plz help asap.

iden blackberry models are not supported.

[no1mobiles]

thanx elco. but when will it be supported??

[.:R-mitik:.]

Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Logs remaining: 2
Authentication successfull.
Checking upgrade client version...
Your client is up-to-date.
Reading phone info...
Detected phone model is: RIM 7200 Series Colour GPRS Handheld ()
----------Code calculation started: 23:37:23----------
Locating Emeralda server...
Server found.
Connecting to server...
Server connection successfully established.
Authenticating on server...
Authentication successfull.
Checking upgrade client version...
Your client is up-to-date.
Server is calculating code...
================================================== ========
Error reading code: Operation aborted


what this is mean!!!!!

[talhaawan]

good support and good work

[edermix]

In the case of Berry 7230 how to do to type the code?

I have done all this and not working. (can't enter menu)


Now you are ready to unlock the phone
Connect the phone to the pc and click read the code and it will show you the code.

Entering unlocking codes:
1 - Using the menu go to Settings Menu -> SIM card press select.
2 - While holding the SHIFT key, type “MEPD” or incase of 7100 “MEPDD”
3 - You should now see the five locking categories listed.
4 - While holding the ALT KEY, type “MEP2” or incase of 7100 “MEPP2”
5 - Release the alt key.
6 - You are now prompted to enter the Network MEP code (will also state how many attempts left)
7 - Enter the code
8 - Enter Return/Enter
9 - The device should then be unlocked


PS.
This is only the first promotion. Many other promotions will be available in the feature.
Stay close ;)[/quote]

[Ddavez]

Hi Everyone. Having trouble with my logger and Multiunlock. As I understand the jungo drivers are in the blackberrylogger install file which is loaded in my program files dir. I've loaded the blackberry software and now I've tried everything to change the blackberry driver to the jungo one. In the end every time I point windows to the blackberry jungo files it's says there's now product info in there and won't let me allocate those drivers to the blackberry (it's an 8100 btw) any help guys?
Cheers
DD

[kie999]

8100 is not supported by ns blackberry:rolleyes::rolleyes::rolleyes:

[r3novati0]

Hi there! Does anyone Know who,how,where i can contact someone who can help me to unlock BlackBerry pearl (orange). I really need help plz
IMEI:352127.01.345207.8
PIN:2053ACd2
Problem: Sim card rejected!!!!! :(:(:(:(