View Full Version : v3 display white
Hello friends problem v3 motorola display white procedure repair not solved:
repair pds and full flash use smart clip full flash use rsd not solved
change flex and display new
rewoking zone conettor flex and micro bga use flux problem not solved phone is work call and recevied problem display internalwhite and external blue problem is hadware not software please possible solution my problem thanks regards
evolutionmobile
09-20-2006, 14:36
Hello friends problem v3 motorola display white procedure repair not solved:
repair pds and full flash use smart clip full flash use rsd not solved
change flex and display new
rewoking zone conettor flex and micro bga use flux problem not solved phone is work call and recevied problem display internalwhite and external blue problem is hadware not software please possible solution my problem thanks regards
Try to change the LCd cause some of the LCd doesn't support the latest firmware.
parveen kumar
09-30-2006, 16:25
Try to change the LCd cause some of the LCd doesn't support the latest firmware.
its a hardware problem.change
the lcd ic.
problem is solved 1000000000.%
Enloy.......................:cool:
iran-mobile-team
09-30-2006, 20:08
full flash with smart clip
regards:alireza ghahramani
+989141141493
kevdodds86
09-30-2006, 20:21
what i could be is that either the display's gone or it has a software fault
wilson-yang
09-30-2006, 22:42
white screen for V3 when you power on cell phone(only for V3)
that's not LCD issue!
not sfotware version issue!
not Q960 issue!
not KeyBoard_connector issue!
Slider_Gsm
09-30-2006, 22:55
look friend
when you flash your phone with high version
did it write SW UPGRADE INPROGRESS on screen IF
YES software probleme and needs ceratain version i can help you in that
NO may be hardware probleme and check what freinds told you but carefully
br
Hello friends thanks problem not software use last software version R374_G_0E.42.0CR_PDS005_LP0039_DRM0001_JPJAVA_G_0E _V3_01_0AR_SE8615MBXXH1121_1FF and reflash flash not solved use full flash and flex and reflash smart clip box change different new and used work display same problem resolder connettor use flux and hot air low and iron small fine not solved display white thanks
gambitjam
12-02-2006, 00:43
look friend
when you flash your phone with high version
did it write SW UPGRADE INPROGRESS on screen IF
YES software probleme and needs ceratain version i can help you in that
NO may be hardware probleme and check what freinds told you but carefully
br
I believe of that upgrade/ newer version thing m8.
A customer was in rush & ask me to replace his v3r Board (which has no service problem) with my v3 board. So, after i change it the screen was blank. I have to transfer the case with the flex & screen.
So i full flash his v3r which is fixed into v3 flex & screen, and now its showing WHITE SCREEN.
What type of file do you think will solve it?
Slider_Gsm
12-12-2006, 22:26
i think you should give monster file to your phone with mss4 that worked always
cause thereis always different in software in displays too