View Full Version : v3 razr no lcd
hello..
my v3 is problem :)
press no dan start keypad saund ok speaker ok but black lcd ...
what solusion.....
please help me..
to be not to be
why.. no answer
shachash
09-12-2006, 11:56
try to flash other firmware,shuld be o.k.
use the latest v3 flash file if still has the same result check the flex..
not to be ...
software is not
ı`m to think this phone`s problem hardware (a little water damage)
but phone working now dead ( phone open sound ok but not spectre..
solution please....
change flex cable and flash will be ok
problem ok
hibrit ıc change is ok
T Mobile
10-01-2006, 12:25
problem ok
hibrit ıc change is ok
What is Hibrit ic sir ? Where localtion is it in ?
I have V3i have this problem too. Little water damage, i changed flex cable and flashed full but still the same. Can some tell me the hints ? Thanks
plz poste picture
i've an v3 wich work ok but power btn dont work(i use charger to turn it on)
flex cable is changed 3 times but same problem
danex_2000
10-01-2006, 15:50
most of motorola we have a flash file called flex file if the flex file is defferent from previous did you write the result is no LCD display in the screen only the boot loader.
i have a little tips about mot v3 serries:
1. back up the pds file
2. repair the pds
3. write full flash or reflash
if the phone did not display after full flash
write the full flex file the same version of your full flash file
4. done
this is important after pds repair:
V3i_R47A_G_08[1].D8.35R_lp0021_reflash.smf
V3i_R47A_G_08[1].D8.35R_lp0021_full_flash.smf
V3i_R47A_G_08[1].D8.35R_lp0021_GSPSLQAT675UR056_flash_flex.smf
if #+*+pwr mack boot loder and you can see that its soft prob
if you cant see anything hardwere prob
100%
br