View Full Version : L6 dead when i make tp..how to repair it
mmanduri
09-15-2006, 19:38
hi...i have one l6 dead when i make tp...i terit up resistor somewhere aroun tp...i think it is around 5ohm...anybody have service manual and some instructions about that...mostly phone is dead...have no cummunication with pc or smart moto...
use MS4 / or the smart moto to reflash the phone will be ok.
good luck
use MS4 / or the smart moto to reflash the phone will be ok.
good luck
I never use MS4 but SmartMoto / smartclip DEFINITELY CA NOT flash the phone if "S Blank Neptune" did not find or connect to PC. :rolleyes:
i have one l6, after testpoint unlock successfull. but not power up. i flashed also but same result not power up phone, nither the boot mode nor normal, so what suggestion,, help me reply thanks,
for all of you unlockin motorolas out there only two rules
1) be very careful when removin metal to access testpoint too much force will damage pcb
2) disconect lcd when unlockin
if you do above correctly then phone will power on after unlockin if didnt then post will be please help me
mmanduri
09-21-2006, 10:49
will be please help me to repair this phone...smart moto can't connect to the phone if someone has service manual or something like with some tips or if someone have some problem like mine and how to solve it?
Whitch box are you using, mmanduri and safwanp? Tell me more......
by useing USB smart you will born youar L6 again
i am using smart moto, repair ok but no result, now bootloader 0.ff, after write bootloader with usbsmart, i am tried with smartmoto repair pds error-9b, displayed give me suggestion, to alive my phone, thanks reply
tonytechgsm
10-02-2006, 14:22
L6 both mic and speaker not work but loud speaker is working . please what do I do
tyson0513
10-04-2006, 19:23
i am using smart moto, repair ok but no result, now bootloader 0.ff, after write bootloader with usbsmart, i am tried with smartmoto repair pds error-9b, displayed give me suggestion, to alive my phone, thanks reply
you have to change flash mate, i changed 5 of them so far and it 100% work