PDA

View Full Version : savvy not read TOOLS v1.5?

Baza
03-10-2001, 02:38
what problem?
i try 8-rx 9-tx 12-gnd,interface work with siemens...
what com select?
http://gsm.thoic.net/ubb/frown.gif http://gsm.thoic.net/ubb/frown.gif http://gsm.thoic.net/ubb/frown.gif http://gsm.thoic.net/ubb/frown.gif http://gsm.thoic.net/ubb/frown.gif http://gsm.thoic.net/ubb/frown.gif
cole
03-10-2001, 14:53
You can`t use that pin out for Savvy phone http://gsm.thoic.net/ubb/smile.gif
Keyboard up
Read from right to left
1 = GND
4 = to pin 10 of max
5 = to pin 9 of max
Blu3fish
03-10-2001, 16:40
Pinout is right from both http://gsm.thoic.net/ubb/smile.gif only baza is counting from left and you from right http://gsm.thoic.net/ubb/smile.gif.. This tool is cracked by cyberphreak... and by me it also don't work... use andromea instead.
PADERF
03-10-2001, 22:57
hi guys,
savvy tool 1.5 craked by cyberphreak work perfectly 1000%, but you need to do some modification in your interface :
connect +12 v to resistanse 4.7 to pin 16 of max and the ground of 12v to gnd pin 15 of max
*****16 <---|R4.7K|-- DC + 12v
* M *15 <--- GND ---DC - 12v
* A *
* X *
* *
*****
it's work very very weel

Regards,
PADERF
03-10-2001, 23:04
Originally posted by PADERF:
hi guys,
savvy tool 1.5 craked by cyberphreak work perfectly 1000%, but you need to do some modification in your interface :
connect +12 v to resistanse 4.7 to pin 16 of max and the ground of 12v to gnd pin 15 of max
*****16 <---|R4.7K|-- DC + 12v
* M *15 <--- GND ---DC - 12v
* A * |____ 1 to phone
* X *
* *10 ---->4 to phone
*****9 -----> 5 to phone
1 = GND
4 = to pin 10 of max
5 = to pin 9 of max


it's work very very weel

Regards,
Baza
03-11-2001, 08:59
Blu3fish
may you send me andromeda software?
my e-mail:chrysl@usa.net
PADERF
I NO UNDERSTAND FO YOU SAY!WHAT CONNECT TO 12V???
PLEASE COORRECT WRITE OR SEND PIC ON MY E-MAIL
THHHHHAAAAAAAANK'S
PADERF
03-11-2001, 13:01
why to write me in MAJ caracter, i tryed to help you but really you didn't understang any thing http://gsm.thoic.net/ubb/frown.gif

12 v IT'S DC POWER SUPPLYYYYYYYYYYYYYYYYYYYYYYYYYY
Baza
03-12-2001, 05:01
where PIN TO connected 12V DC???????????????
PADERF
03-12-2001, 16:38
REALLY YOU ARE STUPID MAN !!! LOOOOK WELL IN THE INTERFACE AND TOLD WITH ME AGAIN

PS: I THINK THAT YOU NEED A GOOD GLACESES TO SEE WELL

Regards,
Baza
03-12-2001, 17:17
stupid YOU!
YOU MAY CORRECT WRITE IN ENGLISH?
NO!?
G0 OUT!