K750i vs Setool --> dead [Archive]

Mikrobig

10-16-2006, 23:37

I like opened a K750i for Setool, but when the procedure end, the phone dead :(

I can what's the problem, the setool revented color RED! And not switching the mobil phone.
BUT! I can't changing CID RED49 to original BROWN49 :eek:

Setool nothing doing the mobile, because it see CID RED49, and not loaded to embedem boot loader :(

HELP ME PLEASE, because this is a new mobile, or was.

You can see to the Setool log:

GUI v0.91380042/UNI
Card serial:0000xxxx
Loaded 51 flash descriptors
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35255701693697 CERT:BROWN
Flash ID check:890D
Flash props sent ok
Setting up gdfs...
Clearing total time...
Writing simlocks...
Signing...
control keys complete.
Phone reverted to RED color.
full sig complete.
Unlock Done
Elapsed:18 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:5 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader header not accepted
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:6 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:5 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:5 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:6 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:5 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:6 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:5 secs.
RECOVERY MODE STARTED
Open COM port OK
Open COM port OK
err: A2 (0)
loader header not accepted
All possible recovery loaders fail. That phone not supported
Elapsed:24 secs.
RECOVERY MODE STARTED
Open COM port OK
loader header not accepted
Open COM port OK
Recovery:060330 1434 NPA4_CXC1326739_DB2010_SEMC_RECOVERY_R2A
Fetching phone data from OTP
OTP LOCKED:1 CID:49 PAF:1 IMEI:35255701693697 CERT:RED
THAT WILL KILL YOUR PHONE, ABORTED
Elapsed:40 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:5 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35255701693697 CERT:RED

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS 'TESTPOINT OK'

Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Abort all operations.
embedded bootloader not responds !
Elapsed:93 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:6 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:6 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:6 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35255701693697 CERT:RED

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS 'TESTPOINT OK'

Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Abort all operations.
embedded bootloader not responds !
Elapsed:157 secs.

luzer

10-17-2006, 00:22

Phone is dead because you fail to use the right procedure for this kind of phones, obviously you don't like to read ... http://forum.gsmhosting.com/vbb/showpost.php?p=2007632&postcount=52

Mikrobig

10-17-2006, 11:15

I' M A VERY HAPPY MAN :p

MY PHONE IS LIVING :D

I DOING GOOD!!!!!!

JohnLiew

12-04-2006, 01:04

Hi, Mikrobig, i have the same problem as u. Could u tell me how u revived it?

debeliamark

12-04-2006, 04:20

Hi, Mikrobig, i have the same problem as u. Could u tell me how u revived it?

if you haven't read damned manual (http://forum.gsmhosting.com/vbb/showpost.php?p=2007632&postcount=52) how to handle BROWN CID49 phones, then now only flash EROM via testpoint is solution...

Mikrobig

12-08-2006, 09:27

Yes, only TP procedure use update Erom and Erom update finished SeTool change CID BROWN! And every good, and You flashing new flash file after Erom update :p

stefani

04-08-2008, 17:03

Mikrobig..i do in this way..and now my phone is ok..thank's:)