View Full Version : Bootcore Repair for EL71/S68/C81
Argo_Andrew
10-27-2006, 13:12
EL71 FlashID: 0089,887E
if rewrite bootcore from fullflash, it's cann't be solved by unlock, repair, etc (otp-bootcore imei mismatch)...
I have same problem with S68 and EL71.Please help
EL71 FlashID: 0089,887E
if rewrite bootcore from fullflash, it's cann't be solved by unlock, repair, etc (otp-bootcore imei mismatch)...
Please do not rewrite bootcore from another phone.
This is not SST fault as it rewrites the file you select and by default bootcore area is skipped during flashing.At the posted data from this and another topic we can see that you post data read from another program instead of SST
Anyway there are some files you can upload to the phone to solve this problem. Please contact to our support email for further instructions.
Balkanjia
11-01-2006, 14:47
You say that SST repairs dead phones but no any instructions how to do it so take a note
kosmonaft
11-09-2006, 08:37
still actual problem!!!!!...........any info?
Argo_Andrew
11-09-2006, 11:37
still actual problem!!!!!...........any info?
try to use latest sst, may be it'll help you.
I have no phone to test it now...
cover_one
11-12-2006, 20:05
i have the same problem bootcore destroyed with papua i have trayed with sst 7.55 with full flash repair unlock etc but no chance phone do not start no beep nothing any ideea how to repair bootcore ?
i have the same problem bootcore destroyed with papua i have trayed with sst 7.55 with full flash repair unlock etc but no chance phone do not start no beep nothing any ideea how to repair bootcore ?
For fullflash please uncheck "firmware area only" then check "bootcore recovery" and flash it.
cover_one
11-16-2006, 19:30
For fullflash please uncheck "firmware area only" then check "bootcore recovery" and flash it.
dit not work sst 7.56 checked only bootcore recovery full flashed, now just beep
p.s. that it's the info
first full flashed with just boorcore recovery after tested just beep
then repair test = just beep
Phone model changed to: S68/C81/EL71
Please connect the needle to Test-point
Starting Repairing Procedure ...
Flash Chip: 0089887E (Intel)
Bootcore IMEI: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
OTP IMEI: 358941002861808
Writing Simlock ...
Phone Successfully Repaired
then unlock after tested =just beep
Please connect the needle to Test-point
Starting Unlock Procedure ...
OTP IMEI: 35894100286180
EEPROM IMEI: 358941002861808
Writing Simlock ...
Phone Successfully Unlocked
and that it's the phone info
Please connect the needle to Test-point
Flash Chip : 0089887E (Intel)
Bootcore IMEI ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
FIRMWARE PHONE MODEL: EL71
FIRMWARE VERSION: 06
LANGUAGE GROUP: lg3
dit not work sst 7.56 checked only bootcore recovery full flashed, now just beep
p.s. that it's the info
first full flashed with just boorcore recovery after tested just beep
then repair test = just beep
Phone model changed to: S68/C81/EL71
Please connect the needle to Test-point
Starting Repairing Procedure ...
Flash Chip: 0089887E (Intel)
Bootcore IMEI: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
OTP IMEI: 358941002861808
Writing Simlock ...
Phone Successfully Repaired
then unlock after tested =just beep
Please connect the needle to Test-point
Starting Unlock Procedure ...
OTP IMEI: 35894100286180
EEPROM IMEI: 358941002861808
Writing Simlock ...
Phone Successfully Unlocked
and that it's the phone info
Please connect the needle to Test-point
Flash Chip : 0089887E (Intel)
Bootcore IMEI ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
FIRMWARE PHONE MODEL: EL71
FIRMWARE VERSION: 06
LANGUAGE GROUP: lg3
Try to use fullflash file from intel 0089887E !
It is posible that this firmware version does not support new flash chips like 00089887e that were available in later versions
cover_one
11-18-2006, 11:05
Try to use fullflash file from intel 0089887E !
It is posible that this firmware version does not support new flash chips like 00089887e that were available in later versions
do you mean el71 v31 from support area it is from an intel 0089887E ?
BouRRi_GSM
12-05-2006, 22:47
first full flash EL71_v6_lg3_full.bin have bcore from S68
the second full flash EL71_v31_lg3_full.bin have Bcore clean
so these 2 Full Flash are from not working phone
when u will upload good working File ???
first full flash EL71_v6_lg3_full.bin have bcore from S68
the second full flash EL71_v31_lg3_full.bin have Bcore clean
so these 2 Full Flash are from not working phone
when u will upload good working File ???
All files are working!
Please use bootcore recovery feature!
Please uncheck firmware area only checkbox when you want to upload repair flash.
BouRRi_GSM
12-07-2006, 23:26
thx for answer
but what's this mean
This is Working phone :
Flash Chip : 00208819 (ST)
Bootcore IMEI ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
FIRMWARE PHONE MODEL: EL71
FIRMWARE VERSION: 31
LANGUAGE GROUP: lg35
This is dead phone just beep :
Flash Chip : 0089887E (Intel)
Bootcore IMEI ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
FIRMWARE PHONE MODEL: EL71
FIRMWARE VERSION: 06
LANGUAGE GROUP: lg3
nctrung_vn
10-30-2007, 18:12
The same me problem
Flash Chip : 0089887E (Intel)
Bootcore IMEI ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
FIRMWARE PHONE MODEL: EL71
FIRMWARE VERSION: 06
LANGUAGE GROUP: lg3
What solution to do repair with phone ???
BouRRi_GSM
10-30-2007, 22:44
The same me problem
Flash Chip : 0089887E (Intel)
Bootcore IMEI ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
FIRMWARE PHONE MODEL: EL71
FIRMWARE VERSION: 06
LANGUAGE GROUP: lg3
What solution to do repair with phone ???
SST can't read correct Bcore IMEI or info from EL71
use serach forum, u will find free solution
:)
nctrung_vn
10-31-2007, 15:12
Thank alot for repply with info.
Best & regards
CLIFFORD25502
11-02-2007, 16:07
so what flash file i should use 4 repair my el71? it g=have st flash chip. and before flashing was blinking. now it is totaly dead.