View Full Version : K750i flash chip dead=?
Hello all!
I have flashed my sonny an everything went wrong. Now I can't use any recovery option in all se flash programs. DavinciFlasher won't even test my cable/read CID. Sonic said ; Warning: chip id read error.
I have full batery, usin cruiser cable, brand new 2x1.5v batteries.
Using speed 115200bps. Drivers seems to be fine. hmmmm? Maybe format windows wouldn't be so wrong?
Some hints or help would be very nice.
I don't wonna go to store for a new, help please...
What CID is your phone, 36 or 49?
Phone in Cid 39 red edition
Cid 39? you mean 49? probably testpoint is needed but you are going to need SETool, Cruiser or similar (not cracked) to fiex the phone
Oh my bad, I mean CID 36 red, but I doubt I could ever bring him from dead...?
I have cruiser cable, please describe me how to repair unknown chip?
Seetoll2 console:
GUI v0.91373/UNI
standalone version engaged.
Card serial:00001283
Loaded 49 flash descriptors
RECOVERY MODE STARTED
Open COM port OK
Recovery:041213 1452 MATCXC1326739_COMPACTCERTLOADER R2L
Fetching phone data from OTP
OTP status:0 locked:1 CID:36 PAF:1 IMEI:3565530------ CERT:RED
bad file, will not flash it.
Recovery failed. Phone dead.
Elapsed:10 secs.
Bad file, what file?
The solution is very easy: Do recovery to cid36 red using sonicscrap ***** edition proggie cracked by arash(using com port cable), then reflash using speed unlock -- seetool cracked. For reflash use cid29 files and your phone will be alive. If needed wride gdfs...
But just can't find it anywhere
Crazy_ratata
10-31-2006, 15:52
SEtool cracked can not flash, only unlock...
Instead try SEMC Tool 8.4 cracked (You can experience problems if you have an AMD)
wbr
thanks for helping me, but semc won't even read from phone, like there is no signal.
What did you mean by some problems with AmD cuz i have 2 amd's no intel.
Please tell me how to know if some hardware on phone is damaged?...to know if I can throw the Devil to trash. I'm so nervous....
can anyone send me cruiser drivers.....
send me mail..............
Crazy_ratata
11-01-2006, 14:54
thanks for helping me, but semc won't even read from phone, like there is no signal.
What did you mean by some problems with AmD cuz i have 2 amd's no intel.
Please tell me how to know if some hardware on phone is damaged?...to know if I can throw the Devil to trash. I'm so nervous....
Well AMD has some serious problems with SEMC Tool cracked, so find an Intel machine, this should work perfectly... My original dongle also has problems... But remember, SEMC Tool does not support cid crossing, so find the correct CID36 og CID49 files and flash it on an intel machine...
You are welcome to add me to MSN: My e-mail addy is: Crazy_ratata@hotmail.com
As a last resort you can try 9 voltage instead of normal 3... You can force the IC to work correctly with 9 voltage... Just be carefull, It will shorten the flash ic's life...
Crazy_ratata thanks 4 helping, but nobody has Intel machine in my town, damm,damm, damm...
Semc tool won't even recognize my phone, none other program. I'm thinking about giving up and send it to servicer. Then I will see how much it will cost, I thinking that will go for w810 or w800. I soo loved my K750i, but now I cant see it anymore,..., spended so much time fixing it that I'll throw up soon.