View Full Version : motorola v3 keypaid not work
Nishant jain
11-17-2006, 10:12
I have motorola v3 keypaid problem please just solulation I have alrady change keypaid change but not good reslult found please give hardware
digram
thanks advance
cheak upper side switch like vol camera :D
Have you Change keypad or flex?
if problum is not solved with keypad flux then u need to change ic witch is near to flux conector on pcb.i got no pic 4 it.
imanpanahi
11-19-2006, 14:16
i have any phone by this problem and change LCD and phone is ok .
good luck
darie cruz
11-19-2006, 14:34
check all the connectors prior of heating/reflowing corresponding filters which is much easier, if same then move to next step by adjusting the pin connectors and clean all contacts before assembly
Nishant jain
11-20-2006, 08:43
please give diegram and hardware soluation picture
i need to v3 diagram
any body please help me
software zone
08-14-2007, 20:12
remove all side vollume buton are change ur problem well be solved
pradeep.k
08-19-2007, 21:08
my v3 is not working keypad i changed the total strip but there is no use plz post pictures of keypad ic's plzzzzzzzzzzzz plzzzzzz ppppppplzzzzzzzzzzzzzz
meo786pk
08-20-2007, 07:51
Check it, try it and post the results
my v3 is not working keypad i changed the total strip but there is no use plz post pictures of keypad ic's plzzzzzzzzzzzz plzzzzzz ppppppplzzzzzzzzzzzzzz