View Full Version : Samsung E-340 Hanging And Re-starting
PLESE MY E-340 HANGING AND RE-STARTING SHOWING ONLY "SAMSUNG MOBILE E-340" and re-starting again, i made a new flash but without chance, think it's a hardware problem, please need your help, thanx
scsarcar
11-20-2006, 17:09
Hi Friend
first check with *2767*2878#
if not work then you have to flash your phone in ust pro2
post result
sorry i flashed it with ust pro2 but no chance , phone doesn't boot , it shows at start SAMSUNG E340 then it re-starts again and again... is there any solution please.????
nasir shiwani
12-12-2006, 02:40
same set same problem to me plz help us we need experimental ideas
KhUSbCOMGSM
12-29-2006, 00:49
please help to solve this problem with e340 flashing with hwk,
phone is hanging and restart but dead after try to flash
MCU File: e340xaei2.cla CheckSum: 7EF44D47
TFS File: e340xaei2.tfs CheckSum: 9013BD62
CFG File: e340xaei2.cfg 28321 byte(s)
Preloader Ok, 115200 Baud
Flashloader Ok
FLASH Id: 00EC22FC000100010024, Samsung KAP17SG00A
NAND Format Complete, Time: 00:07
File CRC: 0x5442F60C
Bad Chck: 0x02, 0x7DADC
MCU Write Failed, at: 0x00000000
thx in advance
ramoon20
08-15-2007, 18:26
hi 2 all
same problem my phone was hange at startup log and sometimes work fine about 2mn then freez i flash it with ufs phone dead her is log from my phone
MCU File: e340jpej1.cla CheckSum: 850319C2
Preloader Ok, 460800 Baud
Flashloader Ok
FLASH Id: 00EC22FC000100010024, Samsung KAP17SG00A
File CRC: 0x28843AD9
Bad Chck: 0x02, 0x7D6DA
MCU Write Failed, at: 0x00000000
regards
For restarting phone, try to check with another LCD !
For dead phones follow instructions from service manual, Not power on then flash update not possible sections if that.
BR
Max_B
delchoni
10-11-2007, 09:44
restart phone e340 in sim card only replace RF and problem solved!