BE4 Dead after after unlock [Archive]

View Full Version : BE4 Dead after after unlock

Sullykaka

11-21-2006, 11:16

Bert

11-22-2006, 06:55

if you have the backup for the first 64kb backup yes , it can be easy to revive, just write it back you can get the working phone again, or you have to try to use the reviver to try your luck. search for the old post you will get it.

Kethey

11-23-2006, 12:30

I have the same problem. I did not made the backup. please help.

ics_igrec_zet

11-23-2006, 14:08

With alcatel is a big problem: teh zone. This are those 64k wich @Bert is talking about. But to BE4 are only a few versions of teh`s so if you have other be4`s i sugest you start reding teh zone and try to write in your phone. In the future if you want to unlock other alcatel`s i sugest download this program (http://unlockeasy.com/modules.php?name=Downloads&d_op=getit&lid=318).
BR, xyz

amonev

11-23-2006, 14:29

Hello all friends. just now I unlock BE4 model 135. Read info IMEI and unlocking ok with USR111...But fon become dead..:o :o :confused: :confused:
Any help.............................................. ......
Thanx in advance

Which program from USR you use? Maybe there is a auto backup in the program folder. If you are lucky, you'll revive your phone!

damabib

12-03-2006, 06:47

thx 4 d info bro..........

badwily

12-03-2006, 09:50

Hello all friends. just now I unlock BE4 model 135. Read info IMEI and unlocking ok with USR111...But fon become dead..:o :o :confused: :confused:
Any help.............................................. ......
Thanx in advance

go here and download henrich 5.23 with TEH zones.....than u have to try this 52 zones until one works on ur phone ;) . Than if ur phone do calls, charge and not restart byself.....it's OK

http://www.gsmhosting.com/vbb/showthread.php?t=351969

riadd

01-17-2007, 12:05

thanks man for this help ....

londonmoney

08-21-2007, 15:34

go here and download henrich 5.23 with TEH zones.....than u have to try this 52 zones until one works on ur phone ;) . Than if ur phone do calls, charge and not restart byself.....it's OK

http://www.gsmhosting.com/vbb/showthread.php?t=351969

Thanks for this post

BENCHENA

08-21-2007, 15:48

Hello all friends. just now I unlock BE4 model 135. Read info IMEI and unlocking ok with USR111...But fon become dead..:o :o :confused: :confused:
Any help.............................................. ......
Thanx in advance

this depend of what Software you use and what are the supported version by this soft .

USR 1.11 is not software for unlocking but collections of free or cracked Softwares used for UNLOCK you should report to your USR Manual Or Best is to USE Vygis .

BR BENCHENA :)

abdoune

08-21-2007, 22:26

Search "DECUVER" it repair all BE4 and BE5 even Teh zone damaged else contact me to send you the setup file
Salam