View Full Version : "Chinese Miracle", Infinity-Box, ATM-Box: everything for "Made in China"...
InfinitySupport
11-25-2006, 19:52
"Chinese Miracle", Infinity-Box, "Tee Lee & Pu Laa Production", www.ATM-Box.com (http://www.ATM-Box.com) present...
What is "Chinese Miracle" ?
"Chinese Miracle" is a free (you no need to pay to use it) software addon for Infinity-Box users provided by "Tee Lee & Pu Laa Production" and www.atm-box.com (http://www.atm-box.com)
All Infinity-Box smart-cards already activated for unlimited work with "Chinese Miracle", just download software and use it.
Product is under development (very active development), so any your comments, bug/test reports are welcome (as well as readed backup files).
"Chinese Miracle" addon developed with the standard Infinity-Box interface so Infinity-Box users no need to have any additional knowledges to work with this adon. Just start software and you will see how is it easy to use.
"Chinese Miracle" general functions:
.Standalone software (no Internet connection required, no logs)
.Upgrade/downgrade phone firmware
.Unlock (remove/clear) network, provider locks
.Unlock user code
.Reset phone settings to defaults (factory state)
.Repair damaged Imei
.Empty board flashing (f.e. after flash chip replacement)
.Make security zone backup during critical operations
.Repair software-related problems
.Repair dead phones
.Read flash/eeprom area backup
.Save operation process results in Log file
"Chinese Miracle" special functions:
.Automatic phone structure detection
.Sp-unlock phones with unknown firmware (autodetection algorithm)
.Unlock user code phones with unknown firmware (autodetection algorithm)
.Reset to defaults phones with unknown firmware (autodetection algorithm)
.Write/Read flash for phones with unknown firmware (autodetection algorithm)
What brands/models supported by "Chinese Miracle" ?
"Chinese Miracle" can operate with wide range of different models. It's hard to list all supported models due to huge models quantity.
Most well known "Made in China" brands/models are:
G-Star
Cect
MP3
MP4
MPEG4
Chinese Nokea+
Chinese Somsung+
Chinese Soni-Ericsson+
Chinese Motarola+
Narnia
Smarj
Zetta
etc.
"Chinese Miracle" is always under development and many new models will be added in future.
If you will see any bugs or problems with connection, phone detection, flashing, unlock, please, contact to us with bug report: InfinityHelp@yahoo.com.hk
We are waiting for your backup files to mail (10Mb max e-mail size): InfinityHelp@yahoo.com.hk
Please, include in your mail the next info:
1. full info from phone back label
2. phone CPU chip name (need to open phone and see it)
3. phone FLASH chip name (need to open phone and see it)
4. connector description or connector photo and info about number of pins, "Ground" pin location, "Charge" pin location.
5. phone photo
Flash files and pinouts will be uploaded in www.infinity-box.com support area ASAP.
"Chinese Miracle" has it's own support section in "Infinity-Box" support area (see left side menu in support area).
Big Thanks to www.atm-box.com (http://www.atm-box.com) for provided information/software and support and we hope on more cooperation in future.
Good Work Infinity Team.
B.R,
Viru
Kashif Khan
11-25-2006, 20:14
Good Work,now we can repair chinies phones,Great.
BR
Kashif Khan
zinoubinabil
11-25-2006, 20:21
don't forget first in the world in the real not in dream
more surprise coming soon
.::Gsmdenis::.
11-25-2006, 20:22
perfect for this ! hope keep on !
BR.,
Denis
higherzman
11-25-2006, 20:24
wow great that's what i call support
BR
Stylo_GSM
11-25-2006, 21:07
Good Work Infinity Team, Really Appreciated.
B.r
andrew14
11-26-2006, 03:12
this wil be the best update in this year!!!!
NadeemShahzad
11-26-2006, 04:37
Really Hot Update :)
Great Work By Infinity-Box Team.
Keep It Up ;)
BR
Nadeem Shahzad
tranchiemtai
11-26-2006, 05:34
I test N91 china , read info fail , read flash FAIL ,
COM8 selected
Device: Autodetect
Checking data, wait...
Action: Read information
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[01]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
Initialize Done
Set baud...
921600
Set baud Done
Check space...
device parameters autodetection in progress..
operation mode: Fast detection mode
detecting chip[01] parameters...
Flash: 01227E22202200
Flash: 29EA0000000000
detected chip size[01]: 01000000
detecting chip[02] parameters...
Flash: 01227E22202200
Flash: 29EA0000000000
detected chip size[02]: 01000000
it's time to stop [290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5]
number of flash chip detected: 01
total flash size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
eeprom area detected: 00E00000-00FFFFFF
detecting structure pass 1...
Err:
stage 2 failed
detection failed
Finished, time used: 49 sec
Remove/Install battery now !
I change baurate auto detect , too
COM8 selected
Device: Autodetect
Checking data, wait...
Action: Read flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[01]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
Initialize Done
Set baud...
921600
Set baud Done
Check space...
device parameters autodetection in progress..
operation mode: Fast detection mode
detecting chip[01] parameters...
Flash: 01227E22202200
Flash: 29EA0000000000
detected chip size[01]: 01000000
detecting chip[02] parameters...
Flash: 01227E22202200
Flash: 29EA0000000000
detected chip size[02]: 01000000
it's time to stop [290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5]
number of flash chip detected: 01
total flash size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
eeprom area detected: 00E00000-00FFFFFF
detecting structure pass 1...
Err:
stage 2 failed
detection failed
detecting firmware version...
can't detect firmware version name
Err: wrong answer[3B]
In progress [flash_part_1_of_1]...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: too many retries
Finished, time used: 266 sec
Remove/Install battery now !
FUN mp3 mp4 V9,
COM8 selected
Device: Autodetect
Checking data, wait...
Action: Read information
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[01]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
Initialize Done
Set baud...
slowest
Set baud Done
Check space...
device parameters autodetection in progress..
operation mode: Complete detection mode
detecting chip[01] parameters...
Flash: 01227E22202200
Flash: 29EA0000000000
detected chip size[01]: 01000000
detecting chip[02] parameters...
Flash: 01227E22202200
Flash: 29EA0000000000
detected chip size[02]: 01000000
it's time to stop [290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5]
number of flash chip detected: 01
total flash size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
eeprom area detected: 00E00000-00FFFFFF
detecting structure pass 1...
Err: error# 0000003B
halongmobile
11-26-2006, 06:05
pinout for MP3-MP4 (BOX MTK)
//////////////////////////////MTK pinout//////////////////////////////
RJ MS connector(2 ranh quay xuong)
1--------------------------18(24)
1------------>10
!!!!!!!!!!
! !
! !
! !
1:Rx
2:TX
7:Vcc
8:GND
Led:
///////////////////////////////////////////////////////////////////////
889 /(18 pins)
10:RX
11:TX
18:GND
-------------------------
CECT(Q380) /(18 pins) <==>[SED_V630]
11:GND
13:RX
14:TX
-------------------------
E108 /(18 pins)<==>[SED_V630]
8 :GND
13:RX
14:TX
-------------------------
889+ /(24 pins)
4:VCC
6:RX
8:TX
20:GND
-------------------------
626 /(18 pin)
3:GND
7:RX
9:TX
-------------------------
i816/i856 /(18 pin)
3:TX
9:GND
4:RX
-------------------------
CECT U8800 /(18 pin)
4:TX
7:GND
9:RX
-------------------------
MP4_K800
=/=/=[[[[[----- (Giac tron 3 chan T190)
1/2/3
1:RX
2:TX
3:GND
-------------------------
M960
=/=/=/=[[[[[----- (Giac tron 4 chan T190)
1:RX
3:TX
4:GND
-------------------------
T100
=/=/=[[[[[----- (Giac tron 4 chan T190)
1:RX
2:TX
4:GND
-------------------------
V66
=/=/=[[[[[----- (Giac tron 4 chan T190)
2:RX
3:TX
4:GND
-------------------------
S681-2 (18 pin)
7:RX
9:TX
10:GND
-------------------------
A28 /(18 pin)
3:VCC
9:GND
10:TX
11:RX
-------------------------
S6990 /(18 pin)
13:RX
12:TX
17:GND
-------------------------
S518+ /(18 pin)
4:TX
5:GND
9:RX
-------------------------
TCL_766 /(18 pin)
1:GND
3:VCC
5:RX
6:TX
-------------------------
L118 /(18 pin)
3:RX
4:TX
10:GND
-------------------------
892 /(18 pin)
8:RX
10:TX
18:GND
-------------------------
A588 /(18 pin)
4:TX
5:GND
9:RX
-------------------------
E708+ /(18 pin)
1+2:GND
10:TX
12:RX
-------------------------
CECT_Q610 /(18 pin)
3:GND
9:RX
10:TX
-------------------------
V6 /(22 pin,1 hang)
1:VCC
5:RX
6:TX
18:GND
-------------------------
A88/A6991 /(18 pin)
8:GND
7:RX
9:TX
-------------------------
T9 /(18 pin)
7:TX
9:RX
11:GND
-------------------------
C926 /(18 pin)
7:RX
9:TX
18:GND
-------------------------
998 /(18 pin)
11:GND
13:RX
14:TX
-------------------------
K889 /(18 pin)
3+4:VCC
7:RX
9:TX
10+18:GND
-------------------------
A318 /(18 pin)
7:RX
9:TX
14:GND
-------------------------
LG_7050 /(24 pin,1 hang)
11:GND
6+13:VCC
19(R=1,5K):RX
12:TX
-------------------------
530 /(Mini 8 pins)
------------
\ !!!!!!!! /
----------
1--------->8
1:Vcc
3:V changer
4:USB
5:USB
6:RX
7:TX
8:GND
-------------------------
308 /(Mini vuong 12 pins)
6:RX
3:TX
2+8:GND
-------------------------
SED_208 (7360)
Tested with CECT i658! Not work with read flash! Only mobile info working!
COM12 selected
Device: Autodetect
Checking data, wait...
Action: Read flash
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[01]...
Flash: 01227E22022201
Flash: 29EA0000000000
flash: Amd PL064J D 8Mb
Initialize Done
Set baud...
921600
Set baud Done
Check space...
device parameters autodetection in progress..
operation mode: Fast detection mode
detecting chip[01] parameters...
Flash: 01227E22022201
Flash: 29EA0000000000
detected chip size[01]: 00800000
detecting chip[02] parameters...
Flash: 01227E22022201
Flash: 29EA0000000000
detected chip size[02]: 00800000
it's time to stop [290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5]
number of flash chip detected: 01
total flash size: 00800000
detecting eeprom area...
eeprom found near: 00700000
eeprom area detected: 00700000-007FFFFF
detecting structure pass 1...
Err: wrong answer[CB]
stage 2 failed
detection failed
Err:
Err: error# 003B3B3B
Err: : wrong answer after chip id request
In progress [flash_part_1_of_1]...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: too many retries
Finished, time used: 110 sec
Remove/Install battery now !
systemworm
11-26-2006, 08:46
Really great work from infinity team.Tanks very much
Good Update Infinity Team
Thanks
zinoubinabil
11-26-2006, 09:40
Tested with CECT i658! Not work with read flash! Only mobile info working!
COM12 selected
Device: Autodetect
Checking data, wait...
Action: Read flash
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[01]...
Flash: 01227E22022201
Flash: 29EA0000000000
flash: Amd PL064J D 8Mb
Initialize Done
Set baud...
921600
Set baud Done
Check space...
device parameters autodetection in progress..
operation mode: Fast detection mode
detecting chip[01] parameters...
Flash: 01227E22022201
Flash: 29EA0000000000
detected chip size[01]: 00800000
detecting chip[02] parameters...
Flash: 01227E22022201
Flash: 29EA0000000000
detected chip size[02]: 00800000
it's time to stop [290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5]
number of flash chip detected: 01
total flash size: 00800000
detecting eeprom area...
eeprom found near: 00700000
eeprom area detected: 00700000-007FFFFF
detecting structure pass 1...
Err: wrong answer[CB]
stage 2 failed
detection failed
Err:
Err: error# 003B3B3B
Err: : wrong answer after chip id request
In progress [flash_part_1_of_1]...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: too many retries
Finished, time used: 110 sec
Remove/Install battery now !
---------------------------------------
I test N91 china , read info fail , read flash FAIL ,
COM8 selected
Device: Autodetect
Checking data, wait...
Action: Read information
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[01]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
Initialize Done
Set baud...
921600
Set baud Done
Check space...
device parameters autodetection in progress..
operation mode: Fast detection mode
detecting chip[01] parameters...
Flash: 01227E22202200
Flash: 29EA0000000000
detected chip size[01]: 01000000
detecting chip[02] parameters...
Flash: 01227E22202200
Flash: 29EA0000000000
detected chip size[02]: 01000000
it's time to stop [290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5]
number of flash chip detected: 01
total flash size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
eeprom area detected: 00E00000-00FFFFFF
detecting structure pass 1...
Err:
stage 2 failed
detection failed
Finished, time used: 49 sec
Remove/Install battery now !
I change baurate auto detect , too
COM8 selected
Device: Autodetect
Checking data, wait...
Action: Read flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[01]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
Initialize Done
Set baud...
921600
Set baud Done
Check space...
device parameters autodetection in progress..
operation mode: Fast detection mode
detecting chip[01] parameters...
Flash: 01227E22202200
Flash: 29EA0000000000
detected chip size[01]: 01000000
detecting chip[02] parameters...
Flash: 01227E22202200
Flash: 29EA0000000000
detected chip size[02]: 01000000
it's time to stop [290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5]
number of flash chip detected: 01
total flash size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
eeprom area detected: 00E00000-00FFFFFF
detecting structure pass 1...
Err:
stage 2 failed
detection failed
detecting firmware version...
can't detect firmware version name
Err: wrong answer[3B]
In progress [flash_part_1_of_1]...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: data size mismatch at 00000000, retry...
Err: too many retries
Finished, time used: 266 sec
Remove/Install battery now !
FUN mp3 mp4 V9,
COM8 selected
Device: Autodetect
Checking data, wait...
Action: Read information
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[01]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
Initialize Done
Set baud...
slowest
Set baud Done
Check space...
device parameters autodetection in progress..
operation mode: Complete detection mode
detecting chip[01] parameters...
Flash: 01227E22202200
Flash: 29EA0000000000
detected chip size[01]: 01000000
detecting chip[02] parameters...
Flash: 01227E22202200
Flash: 29EA0000000000
detected chip size[02]: 01000000
it's time to stop [290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5]
number of flash chip detected: 01
total flash size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
eeprom area detected: 00E00000-00FFFFFF
detecting structure pass 1...
Err: error# 0000003B
"Chinese Miracle" is always under development and many new models will be added in future.
If you will see any bugs or problems with connection, phone detection, flashing, unlock, please, contact to us with bug report: InfinityHelp@yahoo.com.hk
We are waiting for your backup files to mail: InfinityHelp@yahoo.com.hk
Please, include in your mail the next info:
1. full info from phone back label
2. phone CPU chip name (need to open phone and see it)
3. phone FLASH chip name (need to open phone and see it)
4. connector description or connector photo and info about number of pins, "Ground" pin location, "Charge" pin location.
5. phone photo
Thanks for understandt.
very good work for infinty teeam niece update
InfinitySupport
11-26-2006, 11:08
@tranchiemtai
@taihv
Please, send me pinouts for your phones: InfinityHelp@yahoo.com.hk
Also today small time later new software will be uploaded in support area.
Hi
thanks to the infinity team.
Is
Anna KOREAnina module supported too? or only chinese miracle?
Br
armkbdotcom
11-26-2006, 11:56
Surprising update, thanks
waiting for flash files.
InfinitySupport
11-26-2006, 11:57
@s4sajii
only "Chinese Miracle"
@tranchiemtai
@taihv
ChineseMiracle v1.05 uploaded in support area.
.flash/eeprom read operation improved
please, try to read flash again.
barhoomh
11-26-2006, 12:46
great updat from great team
tranchiemtai
11-26-2006, 13:14
Thank mr.infinity ,
I test N91, fun mp3 mp4 v9 ,
Nokia N91
cpu mt6219
FLASH 128mb SPANSION am49PDL127BH, S71PL127JXX
FUN MP3 MP4 V9
CPU MT6219AT-0631 EVE- QGRF2-MM738CD
FLASH SPANSION 71IPL127JBOBAWQ9-0623MPM-MALAYSIA
Info ok bautrate 96100 ,
not ok read flash boot bautrate auto detect.
COM8 selected
Device: Autodetect
Checking data, wait...
Action: Read information
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[01]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
detecting chip[02]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
detecting chip[03]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
detecting chip[04]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
Initialize Done
Set baud...
921600
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[01] parameters...
Flash: 01227E22202200
Flash: 29EA0000000000
detected chip size[01]: 01000000
detecting chip[02] parameters...
Flash: 01227E22202200
Flash: 29EA0000000000
detected chip size[02]: 01000000
it's time to stop [290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5]
number of flash chip detected: 01
total flash size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
eeprom area detected: 00E00000-00FFFFFF
Finished, time used: 31 sec
Remove/Install battery now !
COM8 selected
Device: Autodetect
Checking data, wait...
Action: Read flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[01]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
Initialize Done
Set baud...
921600
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[01] parameters...
Flash: 01227E22202200
Flash: 29EA0000000000
detected chip size[01]: 01000000
detecting chip[02] parameters...
Flash: 01227E22202200
Flash: 29EA0000000000
detected chip size[02]: 01000000
it's time to stop [290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5]
number of flash chip detected: 01
total flash size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
eeprom area detected: 00E00000-00FFFFFF
detecting firmware version...
Err:
Err: wrong answer[3B]
can't detect firmware version name
Err: error# 0000003B
Err: connection lost
Finished, time used: 86 sec
Remove/Install battery now !
Fun mp3 mp4 V9
COM8 selected
Device: Autodetect
Checking data, wait...
Action: Read flash
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[01]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
Initialize Done
Set baud...
921600
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[01] parameters...
Flash: 01227E22202200
Flash: 29EA0000000000
detected chip size[01]: 01000000
detecting chip[02] parameters...
Flash: 01227E22202200
Flash: 29EA0000000000
detected chip size[02]: 01000000
it's time to stop [290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5]
number of flash chip detected: 01
total flash size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
eeprom area detected: 00E00000-00FFFFFF
detecting firmware version...
Err: wrong answer[FB]
Err: wrong answer[3B]
Err: wrong answer[FB]
can't detect firmware version name
Err: wrong answer[3B]
Err: connection lost
Finished, time used: 79 sec
Remove/Install battery now !
InfinitySupport
11-26-2006, 13:19
Please, disable (uncheck) "detect firmware version" box and try to read flash again.
freakyass
11-26-2006, 14:52
here the result :
"Dongle cant found
Card with specified AID not found
Smart card API error #0
Operation completed succesfully,
What happen to my box sir, i use infinity mini plus so whats is my problem... regards:D
hi can u please help me.
i m try to get acss to atm box support eara to downlod chinese miracle but i can nt .
i useing DongleManager wich i downlod from atm box but it dose nt alow me to get acss.
can u please tel me how to downlod chinese miracle.
thank u
i get same problem i m using DongleManager but i giving me this masege "Dongle cant found
Card with specified AID not found
Smart card API error #0
Operation completed succesfully,
Amir-SkillZ
11-26-2006, 15:02
This is Awsome Really big hit.....No Comments INfinity Always on TOP ...Best GSM product with Super Support in GSM History Hope ALL Agree with Me ?
.::Rizwan::.
11-26-2006, 15:02
here the result :
"Dongle cant found
Card with specified AID not found
Smart card API error #0
Operation completed succesfully,
What happen to my box sir, i use infinity mini plus so whats is my problem... regards:D
hi can u please help me.
i m try to get acss to atm box support eara to downlod chinese miracle but i can nt .
i useing DongleManager wich i downlod from atm box but it dose nt alow me to get acss.
can u please tel me how to downlod chinese miracle.
thank u
i get same problem i m using DongleManager but i giving me this masege "Dongle cant found
Card with specified AID not found
Smart card API error #0
Operation completed succesfully,
You have to download the software from infinity Support site and not from ATM-Box Site.:D
Thanx to InfinitySupport for this tip.;)
shantilal
11-26-2006, 16:11
nice surprise from infinity
Freshbol
11-26-2006, 16:16
Can I unlock MPEG4 SAMSUNG E370C
1. Phone lable Model No: E730C in battery E708.
2. MT6219AT 0552-EVS QGNFW MLRR5CD.
3. Samsung 540 K9F1208U0B-JTB0
Freshbol
11-26-2006, 16:21
Can I unlock MPEG4 SAMSUNG E370C
1. Phone lable Model No: E730C in battery E708.
2. MT6219AT 0552-EVS QGNFW MLRR5CD.
3. Samsung 540 K9F1208U0B-JTB0
I'm sorry, I forget photo:)
InfinitySupport
11-26-2006, 16:27
Can I unlock MPEG4 SAMSUNG E370C
1. Phone lable Model No: E730C in battery E708.
2. MT6219AT 0552-EVS QGNFW MLRR5CD.
3. Samsung 540 K9F1208U0B-JTB0
Sure you can try.
1. make backup for emergency case.
2. try to make "Unlock"
3. in case of connections/detection problems download "ChineseMiracle v1.06" from supprt area and try again.
if it will be any problems with "Unlock"
1. try to repair Imei.
2. If Imei repair work Ok for this model, make "Format FFS" and restore original Imei after "Format".
Befor think no one develope software for China phone but now infinity can.
Bravo ! I have phone try tomorow. Thank infinity team.
the_frightener
11-26-2006, 16:50
don't forget first in the world in the real not in dream
more surprise coming soon
Yes it is first in the world :) & i'm realy proud to be a Infinity user ;)
i'm not finding the correct words that how to THANK Infinity Team for their realy HARD WORK for their users like me n every 1 here. only i can say here
Big Thanks Infinity Team :)
MORE POWER TO INFINITY TEAM.
With Best Regards
INFINITY USER ;)
Freshbol
11-26-2006, 17:10
Can I unlock MPEG4 SAMSUNG E370C
1. Phone lable Model No: E730C in battery E708.
2. MT6219AT 0552-EVS QGNFW MLRR5CD.
3. Samsung 540 K9F1208U0B-JTB0
I'm sorry, I forget photo:)
And Can I unlock from jack socket with T191 cable ?
InfinitySupport
11-26-2006, 19:21
I'm sorry, I forget photo:)
And Can I unlock from jack socket with T191 cable ?
If your phone has bottom connector like you posted here http://forum.gsmhosting.com/vbb/showpost.php?p=2107933&postcount=32
I think it will not work withT191 cable. Anyway, you can try, it will be no any damage for phone.
@InfinitySupport: I can help you as beta tester! In our market, this phone model is very popular. If you need any help about testing, pinout or flash file backup, pls contact me!
B.R.
Finally, it's working with v1.07, but not perfect! :D
But read phone info still have problem!
COM3 selected
Device: Autodetect
Checking data, wait...
Action: Read information
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
total number of flash chip detected: 01
Initialize Done
Set baud...
921600
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
total number of flash chip detected: 01
total flash region size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
eeprom area detected: 00E00000-00FFFFFF
detecting firmware version...
.................................................. ..............
.................................................. ..............
can't detect firmware version name.
if software not respond/freez/failed now, make "Detect firmware version (slow process)" unchecked and repeat operation.
Finished, time used: 38 sec
Remove/Install battery now !
---------
Reading flash:
COM3 selected
Device: Autodetect
Checking data, wait...
Action: Read flash
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
total number of flash chip detected: 01
Initialize Done
Set baud...
921600
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
total number of flash chip detected: 01
total flash region size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
eeprom area detected: 00E00000-00FFFFFF
detecting firmware version...
.................................................. ..............
.................................................. ..............
can't detect firmware version name.
if software not respond/freez/failed now, make "Detect firmware version (slow process)" unchecked and repeat operation.
Flash: 01227E22202200
Flash: 29EA0000000000
Reading [flash_part_1_of_1]...
Err: unexpected data: 3B
Err: data size mismatch at 00E5A000, retry...
Err: data size mismatch at 00E5A000, retry...
Err: data size mismatch at 00E5A000, retry...
Err: data size mismatch at 00E5A000, retry...
Err: data size mismatch at 00E5A000, retry...
Err: data size mismatch at 00E5A000, retry...
Err: data size mismatch at 00E5A000, retry...
Err: too many retries
file saved: Backup_flash_part_1_of_1_2006-11-27_10-11-30.B0X.bin
Finished, time used: 1497 sec
Remove/Install battery now !
halongmobile
11-27-2006, 05:01
we can help INFINITY TEAM beta testing because VN .....many many CHINESE PHONE
InfinitySupport
11-27-2006, 05:54
Finally, it's working with v1.07, but not perfect! :D
..........
can't detect firmware version name.
if software not respond/freez/failed now, make "Detect firmware version (slow process)" unchecked and repeat operation.
Please, make "Detect firmware version (slow process)" unchecked and repeat flash read operation. "Detect firmware..." option can take a lot of time and can found nothing in some cases (depends on phone version). It's need to see more backup files to make this option better.
Also, please, try to read on more slow speed, not 921600.
halongmobile
11-27-2006, 06:38
TESTED UNLOCKED
MODEL: MPEG4 (the same k790 se) PANDA X30
lang :China Vietnamese
cpu MT6219
32Mb SRAM
SPANSION AM49PDL127BH,S71PL127JXX
CABLE MINI +TOOL CM _V107
log
COM1 selected
Device: Autodetect
Checking data, wait...
Action: Unlock
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
total number of flash chip detected: 01
Initialize Done
Set baud...
115200
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
total number of flash chip detected: 01
total flash region size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
eeprom area detected: 00E00000-00FFFFFF
detecting structure pass 1...
...............
detecting standard location...
.................................................. ......
detecting extended location...
..................................................
detecting standard offset...
detecting standard data...
detection complete
element 1 detected ok
detecting firmware version...
.................................................. ..............
.................................................. ..............
can't detect firmware version name.
if software not respond/freez/failed now, make "Detect firmware version (slow process)" unchecked and repeat operation.
Flash: 01227E22202200
Flash: 29EA0000000000
Reading [eeprom]...
file saved: Backup_eeprom_2005-6-12_9-16-53.B0E.bin
detection pass 1, wait...
detection pass 2, wait...
Check space Done
Write...
Flash: 01227E22202200
Flash: 29EA0000000000
Write: eeprom
Write Done
Finished, time used: 353 sec
Remove/Install battery now !
halongmobile
11-27-2006, 06:51
new imei: 888888888888885
imei verified Ok
Finished, time used: 17 sec
Power off phone now !
Action: Imei
Model: Autodetect
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected Ok, wait...
Hardware version: AT+EGMR=0,0
Software version: MT6219, E01"
connection lost
Operation failed !
Finished, time used: 6 sec
Power off phone now !
halongmobile
11-27-2006, 07:35
pls add :
1, READ FULL FW because have more 400 model Made in china
2,tool cover FW FULL(.bin) _ to_ fw for tool CM
3, add address FW 4 m(.bin) FW8m and fw 16m
InfinitySupport
11-27-2006, 07:56
Hello,
Thank you very much for reports !
1. if you make "Read flash" this operation make full backup.
2. Yes, thinking now how to make better and safe compatibility
3. software can detect phone memory size (4, 8, 16m) automatically, so no nedd to think what model select. Also unlock operation also used autodetection method and must work for 4, 8, 16m flash size.
Any your more comments are welcome.
PILONCILLO
11-27-2006, 08:03
pantech pantech we need pantech and kg800 please
sorry i know of site but is the more urgent now in market
Hello,
Thank you very much for reports !
1. if you make "Read flash" this operation make full backup.
2. Yes, thinking now how to make better and safe compatibility
3. software can detect phone memory size (4, 8, 16m) automatically, so no nedd to think what model select. Also unlock operation also used autodetection method and must work for 4, 8, 16m flash size.
Any your more comments are welcome.
Now we need support for AD CPU type! And with MT CPU, i think u need more improve! We are using a flash tool support by www.gsm369.com, and it working well, but with AD CPU, we still can not touching it! ;)
With your tool, lang pack flashing/reading is a great function!!! Read phone code is not a bad idea too!
B.R.
halongmobile
11-27-2006, 08:36
Now i have 3 phone AD CPU...........I will info
rajabrotherscom
11-27-2006, 08:40
a.o.a and hi to all
very nice infinity thanx...............
br raja:cool:
@halongmobile
Tested, and not work!;)
B.R.
halongmobile
11-27-2006, 08:42
Hello,
Thank you very much for reports !
1. if you make "Read flash" this operation make full backup.
2. Yes, thinking now how to make better and safe compatibility
3. software can detect phone memory size (4, 8, 16m) automatically, so no nedd to think what model select. Also unlock operation also used autodetection method and must work for 4, 8, 16m flash size.
Any your more comments are welcome.
thanks
U need cover file .bin to ok??????:D :D
InfinitySupport
11-27-2006, 08:43
Now i have 3 phone AD CPU...........I will info
Hi,
what is models name ?
pls, send me detailed info about CPU, flash chip, full text from phone back label by PM.
InfinitySupport
11-27-2006, 08:44
@halongmobile
Tested, and not work!;)
B.R.
what exactly not work ?
what exactly not work ?
Nokua
Model No: 6681
CPU: AD 6525
Flash: 71PL064JB0BAW0U
Touch screen.
Can not boot for all actions!
B.R.
.::Zafar Communication::.
11-27-2006, 09:51
TESTED UNLOCKED
MODEL: MPEG4 (the same k790 se) PANDA X30
lang :China Vietnamese
cpu MT6219
32Mb SRAM
SPANSION AM49PDL127BH,S71PL127JXX
CABLE MINI +TOOL CM _V107
log
COM1 selected
Device: Autodetect
Checking data, wait...
Action: Unlock
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
total number of flash chip detected: 01
Initialize Done
Set baud...
115200
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
Flash: 01227E22202200
Flash: 29EA0000000000
flash: Amd PL127J D 16Mb
total number of flash chip detected: 01
total flash region size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
eeprom area detected: 00E00000-00FFFFFF
detecting structure pass 1...
...............
detecting standard location...
.................................................. ......
detecting extended location...
..................................................
detecting standard offset...
detecting standard data...
detection complete
element 1 detected ok
detecting firmware version...
.................................................. ..............
.................................................. ..............
can't detect firmware version name.
if software not respond/freez/failed now, make "Detect firmware version (slow process)" unchecked and repeat operation.
Flash: 01227E22202200
Flash: 29EA0000000000
Reading [eeprom]...
file saved: Backup_eeprom_2005-6-12_9-16-53.B0E.bin
detection pass 1, wait...
detection pass 2, wait...
Check space Done
Write...
Flash: 01227E22202200
Flash: 29EA0000000000
Write: eeprom
Write Done
Finished, time used: 353 sec
Remove/Install battery now !
can u please sort out the pinout of mpeg4 which jeck required please comments
thanks & regards
Zafar Janjua
can u please sort out the pinout of mpeg4 which jeck required please comments
thanks & regards
Zafar Janjua
Try with this (http://forum.gsmhosting.com/vbb/showpost.php?p=2107249&postcount=12), pls!
B.R.
InfinitySupport
11-27-2006, 10:09
Nokua
Model No: 6681
CPU: AD 6525
Flash: 71PL064JB0BAW0U
Touch screen.
Can not boot for all actions!
B.R.
Hi,
what is phone bottom connector ?
.::Zafar Communication::.
11-27-2006, 10:27
Try with this (http://forum.gsmhosting.com/vbb/showpost.php?p=2107249&postcount=12), pls!
B.R.
thanks for reply u mean this
pinout for MP3-MP4 (BOX MTK)
//////////////////////////////MTK pinout//////////////////////////////
RJ MS connector(2 ranh quay xuong)
1--------------------------18(24)
1------------>10
!!!!!!!!!!
! !
! !
! !
1:Rx
2:TX
7:Vcc
8:GND
here is two pinout
1............. 18(24) which confused
and other
1........10
confused 18(24) becaue i call the customer in the mean time i wanna built the cable
thanks and regards
Zafar Janjua
InfinitySupport
11-27-2006, 10:58
also check more pinouts here:
http://www.dalatgsm.com/forums/showthread.php?t=235
mobilegsm30
11-27-2006, 11:39
I have touchscreen phone
name COSUN model - CS512
CPU - ARM MT3219AT
FLASH - 71PL129JBOBAW9B
bottom connector MOTO V3
Hi,
what is phone bottom connector ?
18 pins Samsung standard!
I tested, it can boot with another AD flash downloader!
Catch me at YMS if you need any infomation, pls!
B.R.
InfinitySupport
11-27-2006, 12:12
18 pins Samsung standard!
I tested, it can boot with another AD flash downloader!
Catch me at YMS if you need any infomation, pls!
B.R.
Pls, make this:
software: AModule
model: S700
pls, read flash and send me flash backup file, "operation.log" file and pinout.
InfinityHelp@yahoo.com.hk
After this we will see what we can do
janjaroen
11-27-2006, 12:47
hi.
can i have pin out for NEC N400i.thank.(i want unlock this model)
InfinitySupport
11-27-2006, 13:13
hi.
can i have pin out for NEC N400i.thank.(i want unlock this model)
how about to read this: http://forum.gsmhosting.com/vbb/showthread.php?t=342807
Expertcell
11-28-2006, 01:37
good work infinityteam the best , one question can we have the ATM Anna KOREAnina module ? ;P we need support for pantech phones
InfinitySupport
11-28-2006, 01:48
good work infinityteam the best , one question can we have the ATM Anna KOREAnina module ? ;P we need support for pantech phones
Hi,
Currently this module not available. Pls, don't ask me about future :) Nobody know what will happen tomorrow.
Pls, make this:
software: AModule
model: S700
pls, read flash and send me flash backup file, "operation.log" file and pinout.
InfinityHelp@yahoo.com.hk
After this we will see what we can do
Not work! :(
Maybe i need read flash via labtool! :)
Contac me via ICQ when you are available, pls!
B.R.
halongmobile
11-28-2006, 04:57
Not work! :(
Maybe i need read flash via labtool! :)
Contac me via ICQ when you are available, pls!
B.R.
oh oh thanks BRO TAIHV:D :D
.::Rizwan::.
11-28-2006, 10:28
Need Pinouts for "MPEG4 CECT GS860"
I have it's USB Cable,But i think that it is only for USB Card Reading purposes.
CPU Details:
Chipnuts C625
A535585
050140
0608L
Fudan Micro
Flash Details:
Samsung K5A6317CTN
InfinitySupport
11-28-2006, 11:34
Need Pinouts for "MPEG4 CECT GS860"
I have it's USB Cable,But i think that it is only for USB Card Reading purposes.
CPU Details:
Chipnuts C625
A535585
050140
0608L
Fudan Micro
Flash Details:
Samsung K5A6317CTN
I never have seen this CPU. So, don't think that this phone can be supported.
.:Nadim:.
11-28-2006, 12:22
Great Update Infinity Team:)
Thanks
BR
NMK
Nokua
Model No: 6681
CPU: AD 6525
Flash: 71PL064JB0BAW0U
Touch screen.
Can not boot for all actions!
B.R.
I can Flash this phone!
Contact me if you need some info!
I can Flash this phone!
Contact me if you need some info!
Really?? Remember that we are in Infinity section! So if u flashing via another tool, like AD downloader for ex., then me too! :D
B.R.
CECT A606
COM3 selected
Device: Autodetect
Checking data, wait...
Action: Read flash
Boot...
Press and HOLD Power button now !
Connecting, wait...
Err: boot phase#1 failed
Release Power button now !
Boot Fail
Finished, time used: 2 sec
Remove/Install battery now !
Freshbol
11-29-2006, 07:42
Sure you can try.
1. make backup for emergency case.
2. try to make "Unlock"
3. in case of connections/detection problems download "ChineseMiracle v1.06" from supprt area and try again.
if it will be any problems with "Unlock"
1. try to repair Imei.
2. If Imei repair work Ok for this model, make "Format FFS" and restore original Imei after "Format".
I can't unlock E730c with infinity, but I unlock with software UNLock_MTK V1.30
this log from infinity ChineseMiracle_v107:
E730C
Device: Autodetect
Checking data, wait...
Action: User code
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
Flash: B000B101000000
Flash: B000B100000000
flash: Sharp LRS1393A, LRS1395-F1, LRS1828-F1 B 8Mb
detecting chip[01] in region[00]...
Flash: B000B004000000
Flash: B000B000000000
flash: Sharp LRS1386, LRS1395-F2, LRS1828-F2, LRS1392 T 8Mb
total number of flash chip detected: 02
Initialize Done
Set baud...
115200
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
Flash: B000B101000000
Flash: B000B100000000
flash: Sharp LRS1393A, LRS1395-F1, LRS1828-F1 B 8Mb
detecting chip[01] in region[00]...
Flash: B000B004000000
Flash: B000B000000000
flash: Sharp LRS1386, LRS1395-F2, LRS1828-F2, LRS1392 T 8Mb
total number of flash chip detected: 02
total flash region size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
eeprom area detected: 00E00000-00FFFFFF
detecting structure pass 1...
................
detecting standard location...
.................................................. ......
detecting extended location...
.................................................. ......
location can't be detected
detection failed
Err: autodetection failed.
Finished, time used: 93 sec
Remove/Install battery now !
Ho have pinout for E730+/GM128
for this model pinout 24-pins
david laborator
11-29-2006, 07:48
Great tool as my dreams becomes true now thanks infinity team
InfinitySupport
11-29-2006, 08:03
CECT A606
COM3 selected
Device: Autodetect
Checking data, wait...
Action: Read flash
Boot...
Press and HOLD Power button now !
Connecting, wait...
Err: boot phase#1 failed
Release Power button now !
Boot Fail
Finished, time used: 2 sec
Remove/Install battery now !
What is this phone CPU type and phone botom connector type ?
What is this phone CPU type and phone botom connector type ?
CECT-A606(71PL064JB0,CPU-SC6600D5-180)
Really?? Remember that we are in Infinity section! So if u flashing via another tool, like AD downloader for ex., then me too! :D
B.R.
... then InfinityTeam will implement from that to their sw, who knows :D :D :D
Also, loader for 71PL127..... seem to work now!
"Chinese Miracle", Infinity-Box, "Tee Lee & Pu Laa Production", www.ATM-Box.com (http://www.ATM-Box.com) present...
What is "Chinese Miracle" ?
"Chinese Miracle" is a free (you no need to pay to use it) software addon for Infinity-Box users provided by "Tee Lee & Pu Laa Production" and www.atm-box.com (http://www.atm-box.com)
All Infinity-Box smart-cards already activated for unlimited work with "Chinese Miracle", just download software and use it.
Product is under development (very active development), so any your comments, bug/test reports are welcome (as well as readed backup files).
"Chinese Miracle" addon developed with the standard Infinity-Box interface so Infinity-Box users no need to have any additional knowledges to work with this adon. Just start software and you will see how is it easy to use.
"Chinese Miracle" general functions:
.Standalone software (no Internet connection required, no logs)
.Upgrade/downgrade phone firmware
.Unlock (remove/clear) network, provider locks
.Unlock user code
.Reset phone settings to defaults (factory state)
.Repair damaged Imei
.Empty board flashing (f.e. after flash chip replacement)
.Make security zone backup during critical operations
.Repair software-related problems
.Repair dead phones
.Read flash/eeprom area backup
.Save operation process results in Log file
"Chinese Miracle" special functions:
.Automatic phone structure detection
.Sp-unlock phones with unknown firmware (autodetection algorithm)
.Unlock user code phones with unknown firmware (autodetection algorithm)
.Reset to defaults phones with unknown firmware (autodetection algorithm)
.Write/Read flash for phones with unknown firmware (autodetection algorithm)
What brands/models supported by "Chinese Miracle" ?
"Chinese Miracle" can operate with wide range of different models. It's hard to list all supported models due to huge models quantity.
Most well known "Made in China" brands/models are:
G-Star
Cect
MP3
MP4
MPEG4
Chinese Nokea+
Chinese Somsung+
Chinese Soni-Ericsson+
Chinese Motarola+
Narnia
Smarj
Zetta
etc.
"Chinese Miracle" is always under development and many new models will be added in future.
If you will see any bugs or problems with connection, phone detection, flashing, unlock, please, contact to us with bug report: InfinityHelp@yahoo.com.hk
We are waiting for your backup files to mail (10Mb max e-mail size): InfinityHelp@yahoo.com.hk
Please, include in your mail the next info:
1. full info from phone back label
2. phone CPU chip name (need to open phone and see it)
3. phone FLASH chip name (need to open phone and see it)
4. connector description or connector photo and info about number of pins, "Ground" pin location, "Charge" pin location.
5. phone photo
Flash files and pinouts will be uploaded in www.infinity-box.com support area ASAP.
"Chinese Miracle" has it's own support section in "Infinity-Box" support area (see left side menu in support area).
Big Thanks to www.atm-box.com (http://www.atm-box.com) for provided information/software and support and we hope on more cooperation in future.
Nice Work Infinity Team, You are always infinite, The Name of Infinity-Box is really deserve you. May you keep your work up. Very Very Good Update, but please also provide us new cables also.
InfinitySupport
11-29-2006, 11:51
CECT-A606(71PL064JB0,CPU-SC6600D5-180)
Hi,
This CPU type not supported yet. It's first time when I see this cpu name. If we will see more phones with this CPU we will start work about this kind of models too.
halongmobile
11-29-2006, 13:21
Hi,
This CPU type not supported yet. It's first time when I see this cpu name. If we will see more phones with this CPU we will start work about this kind of models too.
SUPPORT :confused: cpu MT6219
halongmobile
11-29-2006, 15:21
Plz fix tool CM
Write Firmware BAUTE RATE 912600+460800>>>>>reset WINDOWS
Windows XP RAM 1G (2 PC)
TEST on D900
.........
Log opened: [28/11/2006] [20:16:32]
App: D:\SUPPORT INFINITY\mp4-mp3 infynity\ChineseMiracle.exe
Loading data, wait...
[Infinity Box] v1.08
S/N: 0AAE:0108
Wait...
Current device: Autodetect
Done
COM2 ready
Loading file v.02...
CM_Samsung-D900_D970_MAUI.05B.W05.52.MP.V7_REX800_HW_2006-09-18_REX800_178CN_060918NN.B0M.bin Loaded
COM2 selected
Device: Autodetect
Checking data, wait...
Action: Flash write
"SmartWrite" enabled
Verification enabled
Write: Firmware
Skip: Customization
Skip: Language Pack
Skip: Eeprom
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6226:8A02]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
Flash: 89881500010001
Flash: 89881500000000
flash: Intel 128MBit-B Strata B 16Mb
total number of flash chip detected: 01
Initialize Done
Set baud...
921600
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
Flash: 89881500010001
Flash: 89881500000000
flash: Intel 128MBit-B Strata B 16Mb
total number of flash chip detected: 01
total flash region size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
Flash: 89881500010001
Flash: 89881500000000
Reading [eeprom]...
----------------
Log opened: [28/11/2006] [20:23:08]
App: D:\SUPPORT INFINITY\mp4-mp3 infynity\ChineseMiracle.exe
Loading data, wait...
[Infinity Box] v1.08
S/N: 0AAE:0108
Wait...
Current device: Autodetect
Done
COM2 ready
Loading file v.02...
CM_Samsung-D900_D970_MAUI.05B.W05.52.MP.V7_REX800_HW_2006-09-18_REX800_178CN_060918NN.B0M.bin Loaded
COM2 selected
Device: Autodetect
Checking data, wait...
Action: Flash write
"SmartWrite" enabled
Verification enabled
Write: Firmware
Skip: Customization
Skip: Language Pack
Skip: Eeprom
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6226:8A02]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
Flash: 89881500010001
Flash: 89881500000000
flash: Intel 128MBit-B Strata B 16Mb
total number of flash chip detected: 01
Initialize Done
Set baud...
115200
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
Flash: 89881500010001
Flash: 89881500000000
flash: Intel 128MBit-B Strata B 16Mb
total number of flash chip detected: 01
total flash region size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
Flash: 89881500010001
Flash: 89881500000000
Reading [eeprom]...
file saved: Backup_eeprom_2006-11-28_20-24-41.B0E.bin
Check space Fail
Finished, time used: 45 sec
Remove/Install battery now !
COM2 selected
Device: Autodetect
Checking data, wait...
Action: Flash write
"SmartWrite" enabled
Verification enabled
Write: Firmware
Skip: Customization
Skip: Language Pack
Skip: Eeprom
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6226:8A02]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
Flash: 89881500010001
Flash: 89881500000000
flash: Intel 128MBit-B Strata B 16Mb
total number of flash chip detected: 01
Initialize Done
Set baud...
921600
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
Flash: 89881500010001
Flash: 89881500000000
flash: Intel 128MBit-B Strata B 16Mb
total number of flash chip detected: 01
total flash region size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
Flash: 89881500010001
Flash: 89881500000000
Reading [eeprom]...
halongmobile
11-29-2006, 15:45
CODE Chinese Miracla :
*#0000# call or *#0044# call Default English
*#0086# call or *#0886# call set to China
*#0084# call or *#0966# call set to Vietnamese
InfinitySupport
11-29-2006, 16:18
SUPPORT :confused: cpu MT6219
It was cpu name "CPU-SC6600D5-180", I don't know this cpu.
MT6219 - this cpu is supported.
Plz fix tool CM
Write Firmware BAUTE RATE 912600+460800>>>>>reset WINDOWS
Windows XP RAM 1G (2 PC)
TEST on D900 .....
Ok, I'll check software. But it's very strange that PC restart during reading.
CECT-A606(71PL064JB0,CPU-SC6600D5-180)
.
There are quite many types of A606 model in the market, but i have never seen this CPU type! Always MT6219 only!
here's CPU-SC6600D5-180 picture
InfinitySupport
11-30-2006, 08:03
here's CPU-SC6600D5-180 picture
Hi and Thanks Pham ;)
If you have any info about this cpu contact me privately pls.
Diesel_sh
12-01-2006, 12:17
somehow, I can not logon to the support area there, always say "can't find dongle" :(
InfinitySupport
12-01-2006, 15:47
somehow, I can not logon to the support area there, always say "can't find dongle" :(
Could you, please, explain more detailed what is the problem for you to login in infinity-box support area.
albert maren
12-01-2006, 18:46
pls i still dont know how to make cable pinout,is there any cable that can work with cect-696H without making any constroction of cable?.
can somebody give me a picture of the cable we need to flash the CECT phones ?
InfinitySupport
12-01-2006, 20:04
Please, attach here photo of phone connector and also check where is Gnd and +Charge pin in connector and I'll try to give you pinout for this phone.
so for every phone is another cable ? i need the cable to modify it for the CECT phones and i dont know which one to buy .....
InfinitySupport
12-01-2006, 21:35
so for every phone is another cable ? i need the cable to modify it for the CECT phones and i dont know which one to buy .....
Did you tried to check first page of current thread ?
Here is direct link: http://forum.gsmhosting.com/vbb/showpost.php?p=2107249&postcount=12
"Chinese Miracle" software support huge number of phones (I even can't calculate total number of models) so try to imagine how many cables you need for Chinese models...
thanks for reply :)
i understand you ;)
but my question is, what is the basic cable which i will modfiy fpr every china modell
do you know what i mean ? i must have a cable before which i modify for a china modell.
InfinitySupport
12-01-2006, 22:46
Basic cable: RJ-45 conector with 3 wires: Rx, Tx, Gnd. With this "universal" cable you can make any phone.
Just for unfo: some phone has only test points (contacts) under battery and it's need to solder wires to unlock/flash.
yes, this is the cable i search. thanks .where can i buy it ? have you any picture ?
can format mtk phone nand by cable ???????????????????????
halongmobile
12-02-2006, 04:12
many many pinout mp4:
http://pinouts.ru/CellularPhones-A-N/cect_5560_pinout.shtml
All users........Can use MTK the same (usb to com ) with tool CM ok,tested.
Diesel_sh
12-02-2006, 07:35
Could you, please, explain more detailed what is the problem for you to login in infinity-box support area.
1. I visited www.atm-box.com (http://www.atm-box.com) , click the link named Support area (http://www.atm-box.com/download) ,
the website redirect me to www.atm-box.com/dowload/ (http://www.atm-box.com/dowload/)
2. Follow the instruction there, I download the dongle manager
3. Extract the files into a temp folder, double click DongleManager.exe
4. Click "Visit support area"
5. a window pop up and tells me "Dongle can't be found Card with specified AID not found! Blah Blah"
6. Checked Device manager and all necessary 3 entries stay there
7. P.S. I can run Infinity application WITHOUT any problem
What I want to ask, is how can I visit the support area in ATM-BOX.COM
Thanks
Diesel
proxy_gsm
12-02-2006, 09:57
many many pinout mp4:
http://pinouts.ru/CellularPhones-A-N/cect_5560_pinout.shtml
All users........Can use MTK the same (usb to com ) with tool CM ok,tested.
Hello sir,
i have phone ,which seeking for phone lock code.here in below i'm giving all details about model:
under battery shows "Model no:G6"
front housing shows"NOKIA POWER MPEG4"
so,if u know the correct pinout pls guide me.thx in advance.
connector type :
/......\
|......|
..total 12 pins.
br,
proxy_gsm
InfinitySupport
12-02-2006, 11:26
1. I visited www.atm-box.com (http://www.atm-box.com) , click the link named Support area (http://www.atm-box.com/download) ,
the website redirect me to www.atm-box.com/dowload/ (http://www.atm-box.com/dowload/)
2. Follow the instruction there, I download the dongle manager
3. Extract the files into a temp folder, double click DongleManager.exe
4. Click "Visit support area"
5. a window pop up and tells me "Dongle can't be found Card with specified AID not found! Blah Blah"
6. Checked Device manager and all necessary 3 entries stay there
7. P.S. I can run Infinity application WITHOUT any problem
What I want to ask, is how can I visit the support area in ATM-BOX.COM
Thanks
Diesel
If you want to login in atm-box support area just buy atm-box.
if you want to use "Chinese Miracle" addon for Infinity-Box, please, read carefully first post in current thead, you can see this:
Flash files and pinouts will be uploaded in www.infinity-box.com (http://www.infinity-box.com/) support area ASAP.
"Chinese Miracle" has it's own support section in "Infinity-Box" support area (see left side menu in support area).
InfinitySupport
12-02-2006, 11:31
Hello sir,
i have phone ,which seeking for phone lock code.here in below i'm giving all details about model:
under battery shows "Model no:G6"
front housing shows"NOKIA POWER MPEG4"
so,if u know the correct pinout pls guide me.thx in advance.
connector type :
/......\
|......|
..total 12 pins.
br,
proxy_gsm
Hi,
sometimes it's hard to understand some things. You asked me about pinout by ICQ. then you dissapeared and now you ask again here.
anyway you are always welcome, im glad to help even if I get to any reply about results.
CODE Chinese Miracla :
*#0000# call or *#0044# call Default English
*#0086# call or *#0886# call set to China
*#0084# call or *#0966# call set to Vietnamese
Can U show Code to reset Sony Eric W800i pls. !
thanks !
InfinitySupport
12-02-2006, 18:54
can format mtk phone nand by cable ???????????????????????
Currently not possible but we work about new features for "Chinese Miracle".
InfinitySupport
12-03-2006, 00:33
"CM pinouts" section updated in support area, more pinouts added.
Freshbol
12-03-2006, 12:12
"CM pinouts" section updated in support area, more pinouts added.
Can I unlock with infinity?
1. full info from phone back label:
Philips S200
GSM 900/1800
996140006241
CN: E0760638F00242
Made in China
imei: 358173002130261
2. phone CPU chip name (need to open phone and see it):
MT6205BA
0620-ENSL
AHAGJ
3. phone FLASH chip name (need to open phone and see it):
MT6305BW
0622-CYEL
DMMCTP
4. connector description or connector photo and info about number of pins, "Ground" pin location, "Charge" pin location.:
Connector plug in from philips-659, pinouts I don't know.
5. phone photo
InfinitySupport
12-03-2006, 12:18
Yes, probably this phone can be unlocked.
please, could you try to find Gnd and Charge pin location so then we can try to find pinout.
Freshbol
12-03-2006, 12:25
Can I unlock with infinity?
1. full info from phone back label:
Philips S200
GSM 900/1800
996140006241
CN: E0760638F00242
Made in China
imei: 358173002130261
2. phone CPU chip name (need to open phone and see it):
MT6205BA
0620-ENSL
AHAGJ
3. phone FLASH chip name (need to open phone and see it):
MT6305BW
0622-CYEL
DMMCTP
4. connector description or connector photo and info about number of pins, "Ground" pin location, "Charge" pin location.:
Connector plug in from philips-659 18-pin, Ground and Charge pinouts I don't know.
5. phone photo
4. connector description or connector photo and info about number of pins, "Ground" pin location, "Charge" pin location.:
Connector plug in from philips-659 18-pin, Ground and Charge pinouts I don't know.
5. phone photo...
InfinitySupport
12-03-2006, 12:32
Hi,
Please, try to use ordinary philips-659 cable and read info from this phone.
also, if you have charger, please, check what pins used for charging.
Freshbol
12-03-2006, 12:39
Hi,
Please, try to use ordinary philips-659 cable and read info from this phone.
also, if you have charger, please, check what pins used for charging.
I haven't charger. How I can chek what pins used for charging?
halongmobile
12-03-2006, 12:56
Can U show Code to reset Sony Eric W800i pls. !
thanks !
mp4 w800c *#881188# unlock not sim
halongmobile
12-04-2006, 09:22
to @infinitysupport
plz help me up to SP file E2PROM D900-D907
InfinitySupport
12-04-2006, 10:10
to @infinitysupport
plz help me up to SP file E2PROM D900-D907
Please, explain more detailed what you need, I did not understand.
As about "PC restart" problem during flash reading/flashing: it can be problem with Prolific-based cables and old Prolific drivers. Please, use cable based on FTDI.
halongmobile
12-04-2006, 12:12
i need flex d900.................
Freshbol
12-05-2006, 20:23
Please, explain more detailed what you need, I did not understand.
As about "PC restart" problem during flash reading/flashing: it can be problem with Prolific-based cables and old Prolific drivers. Please, use cable based on FTDI.
I need full flash for E730+/GM128. Please urgently...:rolleyes:
p.s. This phone was dead, and I flash it with freeware software (because I haven't full-flash for infinity) with full-flash E730+ but after flash, phone is powered with problem white displey.:(
this log from infinity:
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
Flash: B000B101000000
Flash: B000B100000000
flash: Sharp LRS1393A, LRS1395-F1, LRS1828-F1 B 8Mb
detecting chip[01] in region[00]...
Flash: B000B004000000
Flash: B000B000000000
flash: Sharp LRS1386, LRS1395-F2, LRS1828-F2, LRS1392 T 8Mb
total number of flash chip detected: 02
Initialize Done
Set baud...
115200
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
Flash: B000B101000000
Flash: B000B100000000
flash: Sharp LRS1393A, LRS1395-F1, LRS1828-F1 B 8Mb
detecting chip[01] in region[00]...
Flash: B000B004000000
Flash: B000B000000000
flash: Sharp LRS1386, LRS1395-F2, LRS1828-F2, LRS1392 T 8Mb
total number of flash chip detected: 02
total flash region size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 01
eeprom area detected[00800000]: 00600000-007FFFFF
Flash: B000B101000000
Flash: B000B100000000
Reading [eeprom]...
file saved: Backup_eeprom_2006-12-6_0-13-34.B0E.bin
Finished, time used: 323 sec
Remove/Install battery now !
As you said chinese miracle has many phone to unlock which you did not include on the list on the first thread so i would like to know weather LGs are all include cause i could see many LGs which are not the usually ones in the markert here in Sudan it has log as SUDANI please help
InfinitySupport
12-06-2006, 11:27
As you said chinese miracle has many phone to unlock which you did not include on the list on the first thread so i would like to know weather LGs are all include cause i could see many LGs which are not the usually ones in the markert here in Sudan it has log as SUDANI please help
Hi,
Please, open phone and send me info about CPU, flash chip name, phone bottom connector to mail: InfinityHelp@yahoo.com.hk
Then we will see what to do with these phones.
InfinitySupport
12-06-2006, 12:24
06 Dec 2006: ChineseMiracle v1.10 available for download in support area.
list of changes:
.flash write method improved
."format ffs" method improved
.set baudrate method improved
Freshbol
12-06-2006, 23:05
06 Dec 2006: ChineseMiracle v1.10 available for download in support area.
list of changes:
.flash write method improved
."format ffs" method improved
.set baudrate method improved
to InfinitySupport
I have one chine phone GM618
1. full info from phone back label:
Model No: GM618
Made in China
imei: xxxxxxxxxxxxxx
2. phone CPU chip name (need to open phone and see it):
MT6226A
0624-ACS
KGS36
3. phone FLASH chip name (need to open phone and see it):
MT6305BN
0618-CYS
DMM4P8
4. connector description or connector photo and info about number of pins, "Ground" pin location, "Charge" pin location.:
connector_2x6_mini
5. phone photo...
this log when I do read flesh with E730c cable:
Action: Read flash
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6226:8A02]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
Flash: B0001C00000000
Flash: B0001C00000000
total number of flash chip detected: 00
estimated regions assigned
Initialize Done
Set baud...
115200
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
Flash: B0001C00000000
Flash: B0001C00000000
total number of flash chip detected: 00
total flash region size: 00000000
Err: autodetection failed.
Finished, time used: 133 sec
Remove/Install battery now !
InfinitySupport
12-06-2006, 23:57
Hi,
Thanks a lot for info. Flash chip that installed in this phone not supported yet. We will add support for it ASAP.
Freshbol
12-08-2006, 18:22
Why I can't unlock GM128/E730+
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
Flash: B000B101000000
Flash: B000B100000000
flash: Sharp LRS1393A, LRS1395-F1, LRS1828-F1 B 8Mb
detecting chip[01] in region[00]...
Flash: B000B004000000
Flash: B000B000000000
flash: Sharp LRS1386, LRS1395-F2, LRS1828-F2, LRS1392 T 8Mb
total number of flash chip detected: 02
Initialize Done
Set baud...
460800
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
Flash: B000B101000000
Flash: B000B100000000
flash: Sharp LRS1393A, LRS1395-F1, LRS1828-F1 B 8Mb
detecting chip[01] in region[00]...
Flash: B000B004000000
Flash: B000B000000000
flash: Sharp LRS1386, LRS1395-F2, LRS1828-F2, LRS1392 T 8Mb
total number of flash chip detected: 02
total flash region size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 01
eeprom area detected[00800000]: 00600000-007FFFFF
detecting structure pass 1...
...............
detecting standard location...
.................................................. ......
detecting extended location...
...............
detecting standard offset...
detecting standard data...
detection complete
element 1 detected ok
Flash: B000B101000000
Flash: B000B100000000
Reading [eeprom]...
file saved: Backup_eeprom_2006-12-8_22-21-28.B0E.bin
detection pass 1, wait...
detection pass 2, wait...
Check space Done
Write...
Flash: B000B004000000
Flash: B000B000000000
Write: eeprom
Err: error# 000000B4
Err: flash write error: 00E4A000:00002000
Err: error# 000000B4
Err: flash write error: 00E4A000:00002000
Err: error# 000000B4
Err: flash write error: 00E4A000:00002000
Write Fail
Finished, time used: 197 sec
Remove/Install battery now !
===============================================
and I can't flashing with my full backup from E730+...
Device: Autodetect
Checking data, wait...
Action: Flash write
"SmartWrite" enabled
Write: Firmware
Skip: Customization
Skip: Language Pack
Skip: Eeprom
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
Flash: B000B101000000
Flash: B000B100000000
flash: Sharp LRS1393A, LRS1395-F1, LRS1828-F1 B 8Mb
detecting chip[01] in region[00]...
Flash: B000B004000000
Flash: B000B000000000
flash: Sharp LRS1386, LRS1395-F2, LRS1828-F2, LRS1392 T 8Mb
total number of flash chip detected: 02
Initialize Done
Set baud...
460800
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
Flash: B000B101000000
Flash: B000B100000000
flash: Sharp LRS1393A, LRS1395-F1, LRS1828-F1 B 8Mb
detecting chip[01] in region[00]...
Flash: B000B004000000
Flash: B000B000000000
flash: Sharp LRS1386, LRS1395-F2, LRS1828-F2, LRS1392 T 8Mb
total number of flash chip detected: 02
total flash region size: 01000000
detecting eeprom area...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 01
eeprom area detected[00800000]: 00600000-007FFFFF
Flash: B000B101000000
Flash: B000B100000000
Reading [eeprom]...
file saved: Backup_eeprom_2006-12-8_22-28-37.B0E.bin
Check space Done
Write...
Area: Firmware
Flash: B000B101000000
Flash: B000B100000000
Write: Firmware
Err: error# 000000B0
Err: flash write error: 00206000:00002000
Err: error# 000000B0
Err: flash write error: 00206000:00002000
Err: error# 000000B0
Err: flash write error: 00206000:00002000
Err: error# 000000B0
Err: flash write error: 00206000:00002000
Err: error# 000000B0
Err: flash write error: 00206000:00002000
Err: error# 000000B0
Err: flash write error: 00206000:00002000
Write Fail
Finished, time used: 288 sec
Remove/Install battery now !
InfinitySupport
12-08-2006, 21:59
Can I unlock with infinity?
1. full info from phone back label:
Philips S200
GSM 900/1800
996140006241
CN: E0760638F00242
Made in China
Hi,
You can try to unlock with this pinout:
KEYBOARD TOP
1.........18
7: Rx
8: Tx
9: Gnd
maybe need to change Rx <-> Tx
Please, let me know about results and also pls make flash backup and send to me in case of success: InfinityHelp@yahoo.com.hk
Freshbol
12-08-2006, 23:22
Hi,
You can try to unlock with this pinout:
KEYBOARD TOP
1.........18
7: Rx
8: Tx
9: Gnd
maybe need to change Rx <-> Tx
Please, let me know about results and also pls make flash backup and send to me in case of success: InfinityHelp@yahoo.com.hk
I find and get charger pinout:
1.........18
8,11 is "-"
17,18 is "+"
now I test your pinout and reply about results, if I get flash backup I send you.
BR
InfinitySupport
12-08-2006, 23:28
Hi,
If you sure that 8 is "-" then pls try this pinout for unlock:
KEYBOARD TOP
1.........18
7: Rx
8: Gnd
9: Tx
maybe need to change Rx <-> Tx
Freshbol
12-09-2006, 01:28
Hi,
If you sure that 8 is "-" then pls try this pinout for unlock:
KEYBOARD TOP
1.........18
7: Rx
8: Gnd
9: Tx
maybe need to change Rx <-> Tx
this pinout nothing
7: Rx
8: Tx
9: Gnd
maybe need to change Rx <-> Tx,
but this pinout
7: Rx
8: Gnd
9: TX
or change Rx<->Tx
I have error message
this log:
Device: Autodetect
Checking data, wait...
Action: Read eeprom
Boot...
Press and HOLD Power button now !
Connecting, wait...
Err: boot phase#1 failed
Release Power button now !
Boot Fail
Finished, time used: 2 sec
Remove/Install battery now !
DEBLOQUETOUT
12-09-2006, 01:34
Need French Flash Cect U8800
Freshbol
12-09-2006, 04:39
To InfinitySupport
Sir ! How I can use backup file from E730+?
Backup_flash_part_1_of_2_2006-12-8_21-51-40.B0X
Backup_flash_part_2_of_2_2006-12-8_21-57-38.B0X
I think using flash_part_1 after flash_part_2 in flash section with button load firmware it's true or false?
When time infinity support will realease cable for china phone to all customer???????
DEBLOQUETOUT
12-09-2006, 11:55
i looking for French flash CECT U8800
is it possible ?
InfinitySupport
12-09-2006, 16:22
i looking for French flash CECT U8800
is it possible ?
Hello,
Nothing impossible, here is info:
http://forum.gsmhosting.com/vbb/showpost.php?p=2049170&postcount=4
gr8 work
pls i have cect u8800 to remove phone code
but i don't know what cable to use
maybe srial or usb that comes with phone
assistance would be appreciated
thanks!
don't forget first in the world in the real not in dream
more surprise coming soon
ifinity team
always gr8 update
you never allow regrets from customers
and we will never stop trusting you
more grace ahead
i looking for French flash CECT U8800
is it possible ?
SIR
what cable do you use for this phone?
i have one here to remove phone code any help pls?
Freshbol
12-09-2006, 19:15
To InfinitySupport
What's you think, about LG1800, can I flash it with infinity?
It's CPU in category chinese miracle:
cpu - MT6218BT
flash - Samsung 537, spansion
power supply - MT6305N
InfinitySupport
12-09-2006, 19:35
LG G1800 supported in latest M-Module.
Flash files for G1800 will be uploaded in support area in 1-2 days (now preparing it).
InfinitySupport
12-09-2006, 19:39
SIR
what cable do you use for this phone?
i have one here to remove phone code any help pls?
Hi,
Check support area "Chinese Miracle" pinouts section. You will see some pinouts. I think one of them will be good for your phone.
Freshbol
12-09-2006, 19:58
LG G1800 supported in latest M-Module.
Flash files for G1800 will be uploaded in support area in 1-2 days (now preparing it).
Thanks a lot!:D
BR
Freshbol
12-09-2006, 23:13
I send you full flash for E730+ to InfinityHelp@yahoo.com.hk
why i can't write my backup eeprom or full flash on this phone model?
gsm-iran
12-10-2006, 11:59
hi bro
gret work Infinity Team................................
I have Samsung D900 , auto reset when searching .I flashed with CM_Samsung-D900_D970_MAUI.05B.W05.52.MP.V7_REX800_HW_2006-09-18_REX800_178CN_060918NN.B0M.bin in support site .Phone is ok but keyboard is wrong .1 = back , 2=C , 3=#.......
Give piout for mp3 i have dead one and need to flash it but no flash file at support phone only blinks and goes out please put the pin out here i can not understand pinout on the firsrt thread it confusing thanks
InfinitySupport
12-11-2006, 09:32
I have Samsung D900 , auto reset when searching .I flashed with CM_Samsung-D900_D970_MAUI.05B.W05.52.MP.V7_REX800_HW_2006-09-18_REX800_178CN_060918NN.B0M.bin in support site .Phone is ok but keyboard is wrong .1 = back , 2=C , 3=#.......
It looks like it's need to use other firmware. We will try to upload more flash files ASAP.
InfinitySupport
12-11-2006, 09:33
Give piout for mp3 i have dead one and need to flash it but no flash file at support phone only blinks and goes out please put the pin out here i can not understand pinout on the firsrt thread it confusing thanks
Hi,
Check pinout is support area "Chinese Miracle" section. Probably you can find suitable pinout.
Make "reset" operation first, this can solve phone problem.
InfinitySupport , when will you upload another D900 firmware ? We need it ugently !!!
CECT S500 CPU MT6219 dead after flash with CM_Cect-S500_FIREFLY_856[1].W04.52_FIREFLY_856_HW_Mar-3-2005.B0M.bin. Please help me InfinitySupport !!!!!
Freshbol
12-12-2006, 19:38
Please, include in your mail the next info:
1. full info from phone back label
2. phone CPU chip name (need to open phone and see it)
3. phone FLASH chip name (need to open phone and see it)
4. connector description or connector photo and info about number of pins, "Ground" pin location, "Charge" pin location.
5. phone photo
1.MPEG4 Samsung model: S61
imei: xxxxxxxxxx
2.CPU MT6219AT
3.Flash Spension
4.connector-no info.
5. ...
Yes today i have come across of one phone called SONYERICSSON K800i i would like to know weather this phone is a chinese phone or it is from SE company but i saw some flash file in the support area for that perticular phone so is it possible to unlock it using out good mircle software it has same pinout like for the SE K750 please help have many phone in out city but not yet unlocked thanks
NB please give me pinout
InfinitySupport
12-13-2006, 09:20
Yes today i have come across of one phone called SONYERICSSON K800i i would like to know weather this phone is a chinese phone or it is from SE company but i saw some flash file in the support area for that perticular phone so is it possible to unlock it using out good mircle software it has same pinout like for the SE K750 please help have many phone in out city but not yet unlocked thanks
NB please give me pinout
Hi,
open phone and see cpu. If cpu is MT62xx then it's Chinese phone.
pinout: check pinouts in support area "Chinese Miracle" section. You can find similar pinout for your "SE". If no any good pinout exist in support area -= contact me privately and we will try to find pinout together.
Can I get pinout MPEG4 model ZT8380 ?
Thanks what about phone with ZTE is it chinese phone ?????
Yes, MPEG4 From ZTC shing haou:ZT8380
Yes, MPEG4 From ZTC shing haou:ZT8380
Hi,
open phone and see cpu. If cpu is MT62xx then it's Chinese phone.
pinout: check pinouts in support area "Chinese Miracle" section. You can find similar pinout for your "SE". If no any good pinout exist in support area -= contact me privately and we will try to find pinout together.
Thanks Guy i have opened the phone and found out the following information
DB2102
751980C12
64ACXDW
S4R1A
mybe you can find out from this information given to you
thanks
cect any call a606 pinout needed.
br falak
thankx
InfinitySupport
12-14-2006, 14:26
Thanks Guy i have opened the phone and found out the following information
DB2102
751980C12
64ACXDW
S4R1A
mybe you can find out from this information given to you
thanks
Hi,
This CPU not supported by "ChineseMiracle"
InfinitySupport
12-14-2006, 14:27
cect any call a606 pinout needed.
br falak
thankx
Hi,
What is phone bottom connector type ?
Where is Gnd and Charge pins located in connector ?
6280i i need pinouts plise help
InfinitySupport
12-16-2006, 09:38
6280i i need pinouts plise help
http://forum.gsmhosting.com/vbb/showpost.php?p=2141467&postcount=158
Have this phone 02XM the cpu is
PXA880F JCP
5418A 154
SL7GJ
Z418LA 32B
418 Taiwan
can it be unlocked since no box can unlock this phone
InfinitySupport
12-18-2006, 08:46
Have this phone 02XM the cpu is
PXA880F JCP
5418A 154
SL7GJ
Z418LA 32B
418 Taiwan
can it be unlocked since no box can unlock this phone
We have no solution for O2XM.
halongmobile
12-18-2006, 13:39
plz ADD SUPPORT id cpu ANALOG DEVICES
6525ACA
0549
795847.1
SINGAPORO
????????????????
Here we go
NOKIA FCC ID:QMWRRRM-97
Ic:661X-RM97 MODEL 2255
CODE 0538920F N 215M
TYPE RM-97
ESN 026/13008277
ESN HEX 1AC67D95
MADE IN KOREA.
CPU
UPP4M
V3.1
4377161
64AKORW
4376401
UEMC 4.4
7B273 VJ
PHLGK
PLEASE COULD WE NOW WEATHER IT IS POSSIBLE TO BE UNLOCKED????????
THOSE PHONE ARE MADE FROM CHINE TO SUDAN
mobilegsm30
12-19-2006, 09:56
i have Spice S-900
Log opened: [12/17/2006] [2:18:07 PM]
App: D:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.10
S/N:
Wait...
Current device: Autodetect
Done
COM5 selected
Device: Autodetect
Checking data, wait...
Action: Read information
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6227:8A02]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
Flash: 98004900000001
Flash: 07EA0000000000
total number of flash chip detected: 00
Initialize Fail
Finished, time used: 66 sec
Remove/Install battery now !
Hi all were is the flash files for MP3 i have 5pcs requires flashing thanks
InfinitySupport
12-19-2006, 17:33
Hi all were is the flash files for MP3 i have 5pcs requires flashing thanks
Hello,
Here is info about flash files (MP3 too): http://forum.gsmhosting.com/vbb/showpost.php?p=2049170&postcount=4
6280i china 18 pin need pinouts
InfinitySupport
12-20-2006, 23:50
6280i china 18 pin need pinouts
please, check first message in current thread and you will see what I need to know to help with pinout.
halongmobile
12-21-2006, 10:09
plz add support id cpu SKYWORKS( CX80502-36 31059911 0543)
and cpu ANALOG DEVICES (6525ACA 0549 795847.1 )
.::Zafar Communication::.
12-23-2006, 16:04
hi
does any body have the pinout
TIGEER 1000
need urgently
thanks and regards
Zafar Janjua
InfinitySupport
12-23-2006, 16:53
hi
does any body have the pinout
TIGEER 1000
need urgently
thanks and regards
Zafar Janjua
http://forum.gsmhosting.com/vbb/showpost.php?p=2117897&postcount=93
@InfinitySupport please help !
How can i repair C6111 ? phone turn off after 3s.
InfinitySupport
12-24-2006, 11:27
@InfinitySupport please help !
How can i repair C6111 ? phone turn off after 3s.
Hi,
1. make "Format FFS"
2. repair imei
this must helps in most software fault situations.
Format FFS ok
repair imei ok
but phone can not repair ! Can you help me sir ?
tranchiemtai
12-25-2006, 05:06
@InfinitySupport please help !
How can i repair C6111 ? phone turn off after 3s.
please try flash phone , after push reset phone, If not ok, hardware!
*#77812114#
*#881188#
*#77218114#
*#19992006#
*#881188#
#*94267357#
*#881188#
anyone have Narnia 8088 pinout ?
BURHANLAHERI
12-25-2006, 10:38
Good Work infinity Team
Thnkas
WBR
Burhan
InfinitySupport
12-25-2006, 12:09
Format FFS ok
repair imei ok
but phone can not repair ! Can you help me sir ?
Hi,
In this case I think it's HW problem.
InfinitySupport
12-25-2006, 12:16
What to do if you have "Made in China" phone but you don't have pinout:
1. what is full phone name
2. what is full text from phone back label
3. what is phone bottom connector type ?
4. attach phone connector photo (if possible
5. go to support area, download existing pinouts and try to use pinouts from support area that looks suitable for you phone connector
6. if no luck: open phone, probably you will see test points with "Rx", "Tx", "Gnd" marks
7. if no luck: find on phone bottom connector all "Gnd" pins, all "+ battary" pins and all "charge" pins and give me this info, we will try to find pinout.
Send above mentioned info to InfinityHelp@yahoo.com.hk
@InfinitySupport
I bring it to my friend .He use MTK-Box to flash it.Now phone is ok ! So please upload another flash file !
Did you upload new D900 flash file ? I wait for a long time !
InfinitySupport
12-25-2006, 12:36
@InfinitySupport
I bring it to my friend .He use MTK-Box to flash it.Now phone is ok ! So please upload another flash file !
Did you upload new D900 flash file ? I wait for a long time !
All flash files that was received already uploaded in support area.
When you have sent me D900 file ? Can you send it again ?
And some info about flash files is here:
http://forum.gsmhosting.com/vbb/showpost.php?p=2049170&postcount=4
InfinitySupport
12-27-2006, 11:51
"Chinese Miracle" v1.11 uploaded in support area:
http://forum.gsmhosting.com/vbb/showthread.php?t=360861
halongmobile
01-02-2007, 04:40
"Chinese Miracle" v1.11 uploaded in support area:
http://forum.gsmhosting.com/vbb/showthread.php?t=360861
THANKS ........but no support id CPU Texas Instruments (TI)
Test on 6680(M1818)...........PLZ ADD
does anyone know factory code for MP4 chinese miracle
thx in advance
halongmobile
01-02-2007, 12:44
does anyone know factory code for MP4 chinese miracle
thx in advance
code 1234,1122,0000............
dog_baby
01-03-2007, 04:23
I have Prob with Nokia N72i(CPU MT6226BA, FlashChip S71PL129N)
Phone is restart some time.
Read backup OK.
WriteFlash backup from another phone(Phone normal) ----> Phone Dead.
anyone have solution for this Case?
Pls help.
halongmobile
01-03-2007, 06:24
I have Prob with Nokia N72i(CPU MT6226BA, FlashChip S71PL129N)
Phone is restart some time.
Read backup OK.
WriteFlash backup from another phone(Phone normal) ----> Phone Dead.
anyone have solution for this Case?
Pls help.
if Phone is restart some time, not need flash.......plz fomart ffs
dog_baby
01-03-2007, 08:00
Thanks halongmobile
But my phone is Dead after flashing, How to fix this Prob????
code 1234,1122,0000............
thx bro works for me
BR
InfinitySupport
01-03-2007, 19:58
Thanks halongmobile
But my phone is Dead after flashing, How to fix this Prob????
Hi,
It looks like you write incompatible firmware in your phone. Try to write other firmware, best way: find the same good working phone and read flash from it.
In any kind or "restart/freez" situation no need to write flash. First action: make "Format FFS" and restore original imei, then check phone.
Hi i got a narnia flashed with arabic firmware i wish to flash it back to the original chinese firmware please help . I cant seem to find any to work on it and the cable i mod it from usb to a rj45 cable . Is there any ready made for sale . please do help thanks . desperately
InfinitySupport
01-05-2007, 15:22
Hi i got a narnia flashed with arabic firmware i wish to flash it back to the original chinese firmware please help . I cant seem to find any to work on it and the cable i mod it from usb to a rj45 cable . Is there any ready made for sale . please do help thanks . desperately
New flash files for Chinese models uploaded in support area:
CM_Cect-U8800_MIKI26_05C_PCB01_GPRS_MT6226_S01.V61_07
CM_MP4_O2_mini-E59_MT6226_OV7660_M503T_D12.00.0_M500Z_05C_HW_2006 -10-23_En_Vn
CM_Nokia-N72i_MT6226_S01_Y730_HYF.1.12_PCB01_GPRS_MT6227_S0 1.Y730_HYF3_1_1_YW26_05C_2006-10-16_En_Vn
CM_Nokia-6280i_05A_E01_HW M300.05.24.V18_Aug-9-2006_MT6219_Amd_En_Cn
CM_Samsung-X810_05A_E01_HW_M300.05.24.V18_Sep-9-2006_En_Ru
CM_Cect-T689-E730_Y730.HYF3.1.1_YW_26_05C_HW_2006-10-09_En_Vn
New flash files for Chinese models uploaded in support area:
CM_Cect-U8800_MIKI26_05C_PCB01_GPRS_MT6226_S01.V61_07
CM_MP4_O2_mini-E59_MT6226_OV7660_M503T_D12.00.0_M500Z_05C_HW_2006 -10-23_En_Vn
CM_Nokia-N72i_MT6226_S01_Y730_HYF.1.12_PCB01_GPRS_MT6227_S0 1.Y730_HYF3_1_1_YW26_05C_2006-10-16_En_Vn
CM_Nokia-6280i_05A_E01_HW M300.05.24.V18_Aug-9-2006_MT6219_Amd_En_Cn
CM_Samsung-X810_05A_E01_HW_M300.05.24.V18_Sep-9-2006_En_Ru
CM_Cect-T689-E730_Y730.HYF3.1.1_YW_26_05C_HW_2006-10-09_En_Vn
Hi you mean i can flash them using this firmware ? that will be compatible to the phone ?
systemworm
01-06-2007, 07:41
Hi you mean i can flash them using this firmware ? that will be compatible to the phone ?
First of all you must know something about phone hardware
Flash ic name CPU name and etc or press autodetect and software will detect phone after that you can flash the corresponding firmware
halongmobile
01-06-2007, 08:35
plz add cpu SC6600
InfinitySupport
01-06-2007, 10:26
plz add cpu SC6600
If you have any service manual, factory flasher, original firmware files and other information about phones with this CPU: InfinityHelp@yahoo.com.hk
giorgi2002
01-06-2007, 20:51
// 1 2 3 4 5 6 \\
| 7 8 9 10 11 12 |
6: Rx
7: Tx
8: Gnd
WARNING ! Settings will be cleared, user data erased, Imei set to default !
Continue ?
COM1 selected
Device: Autodetect
Checking data, wait...
Action: Reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
flash: EC22E000000000
flash: 29EA0000000000
flash: AMD/Fujitsu std [0008x002000 007Fx010000] 8Mb
detecting chip[01] in region[00]...
flash: EC22E000000000
flash: 4A064600000000
flash: AMD/Fujitsu std [0008x002000 007Fx010000] 8Mb
total number of flash chip detected: 02
Initialize Done
Set baud...
slowest
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
flash: EC22E000000000
flash: 29EA0000000000
flash: AMD/Fujitsu std [0008x002000 007Fx010000] 8Mb
detecting chip[01] in region[00]...
flash: EC22E000000000
flash: 4A064600000000
flash: AMD/Fujitsu std [0008x002000 007Fx010000] 8Mb
total number of flash chip detected: 02
total flash region size: 01000000
detecting eeprom area in 2 chip(s)...
flash: EC22E000000000
flash: 29EA0000000000
checking area[00000000]: 00000000-007FFFFF...
flash: EC22E000000000
flash: 4A064600000000
checking area[00800000]: 00000000-007FFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 01
eeprom area detected[00800000]: 00600000-007FFFFF
flash: EC22E000000000
flash: 29EA0000000000
Reading [eeprom]...
file saved: Backup_eeprom_2007-1-6_17-38-59.B0E.bin
Check space Done
Write...
formatting...
flash: EC22E000000000
flash: 4A064600000000
Write Done
Finished, time used: 681 sec
Remove/Install battery now !
big tanks for best support in world
halongmobile
01-08-2007, 16:30
If you have any service manual, factory flasher, original firmware files and other information about phones with this CPU: InfinityHelp@yahoo.com.hk
ok........i will sent
First of all you must know something about phone hardware
Flash ic name CPU name and etc or press autodetect and software will detect phone after that you can flash the corresponding firmware
Hi guys i am using the narnia cables but i have mod 2 with rj45 head it was actually usb but it doesnt seems to read the phone at all please help .
systemworm
01-08-2007, 20:33
Hi guys i am using the narnia cables but i have mod 2 with rj45 head it was actually usb but it doesnt seems to read the phone at all please help .
Maybe cable is not compatible have you checked it with pinouts on support?
Also maybe phones hardware is faulty
Maybe cable is not compatible have you checked it with pinouts on support?
Also maybe phones hardware is faulty
hi actually i just got this box and am not sure anything abt pinout do you mind to enlighten me . AS i have been using setools all along .
InfinitySupport
01-08-2007, 22:32
hi actually i just got this box and am not sure anything abt pinout do you mind to enlighten me . AS i have been using setools all along .
Box information/pinouts: http://forum.gsmhosting.com/vbb/showthread.php?t=342807
Phones pinouts: www.infinity-box.com (http://www.infinity-box.com) -> support -> cables/pinouts
how can i unlock a zte 3 f 866 can the chinese miracle unlock it
pastor good
01-11-2007, 14:48
Since the list of phones Chineese Miracle can do are infinite, can it unlock motorola phone say model V360. I would like to also use this forum to as you to give solution to the problem of infinity box that says "Division by zero" whenever i start to motorol COMPAL software. What is realy wrong. Does it work at all.
pastor good
01-11-2007, 14:54
I also wish to ask if Chineese Miracle can work of Bird phones made in China, say Model S1180, S1160, V09, V10 etc.
InfinitySupport
01-11-2007, 16:35
@pastor good
1. "division by zero": http://forum.gsmhosting.com/vbb/showpost.php?p=2049170&postcount=4
also, be sure that you start Infinity-Box software but not other software (we never call any of Infinity-Box modules with "COMPAL" name).
2. S1180, S1160:: not supported
3. V09, V10: supported by Infinity-Box alreday long time (it's always good idea to check support area or at least sticky thread before this kind of questions: http://forum.gsmhosting.com/vbb/showthread.php?t=266144)
4. other models: it's good idea to read sticky FAQ thread first: http://forum.gsmhosting.com/vbb/showpost.php?p=2049170&postcount=4
Masud-GSM
01-12-2007, 19:52
Really good work from infinity team.Thankx Infinity Team............
.:Nadim:.
01-14-2007, 16:37
mpeg4 cect s560 cable pinout please help.(------------------)18 pin keyboard top:)
pastor good
01-16-2007, 12:58
The above link you referred me to does not have anything that has any relation with the "Division by zero" problem of the only motorola software programme that Infinity Box has. So pls let me have the solution to this problem and please forget the "COMPAL" terminology wrongly used. Thanks.
InfinitySupport
01-16-2007, 13:17
@pastor good
link that I gave you was absolutely right: always give so detailed problem description that you can give. Untill now I did not understand what software you tried to use and what is the error that you see.
is it error when you start software or is it error during some operations ? Do you think I can read your mind or see what's happen on your PC ?
rajeshbahri
01-17-2007, 16:08
;) sir i need docomo foma d902i unlocking solution
plz help infinty team
Hi
I have Mpeg4 W608C Phone .......... Looks like a Sony Erricson copy touch screen ..
Its a mini usb port on the side ... 6pins i need a cable pinout please help me
It is dead .. went to support site didnt see any 6 pin cable pinout and also No flash file
Please kindl help me i need to revive this phone and once again thanks to Infinity for your wonderful support
thanks
Mike
InfinitySupport
01-19-2007, 21:08
Hi
I have Mpeg4 W608C Phone .......... Looks like a Sony Erricson copy touch screen ..
Its a mini usb port on the side ... 6pins i need a cable pinout please help me
It is dead .. went to support site didnt see any 6 pin cable pinout and also No flash file
Please kindl help me i need to revive this phone and once again thanks to Infinity for your wonderful support
thanks
Mike
Hi Mike,
Here is some info: http://forum.gsmhosting.com/vbb/showpost.php?p=2212036&postcount=7
in most cases you can make phone alive w/o flashing, only via "Format FFS".
Ok i will try since remaining pins are only 3 so no big deal ,, :) let me see if i can read the phone and revive with format FSS
Thanks again bro ,, and if i find out the pinout i will post it here
thanks
Mike
InfinitySupport
01-19-2007, 21:54
Ok, thanks.
also, make full backup (Read flash) before "format FFS" for emergency case. And this backup also welcome to: InfinityHelp@yahoo.com.hk
Dear sir. a customer brought to me a MP4 S608 just to reset the userlock. I tried it with infinity many times and after process the phone is still userlocked. what I appreciate in this software is that though the eeprom of the phone was rewriten the phone is still alive. I was afraid to use it cos it (Chinese miracle) was my first time to use it. the phone is not reseted but it is still alive and this is very important for us (unlockers): IF YOU CAN NOT SOLVE THE PROBLEM DON'T AT LEAST MAKE THINGS BECOME WORSE:D
InfinitySupport
01-19-2007, 22:45
If you make backup you always have ability to return phone to it's original state.
user code: what is the problem ? software can't connect or something wrong during unlock process ? post log to see.
in fact when u enter the menu of the phone and u want to access the a section like pictures the phone asks u to enter a user code. I just got my infinity with chinese miracles cables so the softawre connects with the phone but the only thing is that the software auto find the correct eeprom area to deal with. so at the end of the process the user code is still there. I will try to bring u log (if customer still have the phone) but u will not be able to get the full log cos when the log window is full the software erase it an start a new one untill process is finished. so u can only get log of ending process which is even sucessfull (no error). but user lock still there.
I forgot. thanks for ur quick reply. it seems u do not sleep in order to help customer.
InfinitySupport
01-19-2007, 23:15
try to use codes like: 1122, 3344, 1234, 5678
Chinese phones has not ordinary default user codes.
ok I will try and let u know. big thanks
halongmobile
01-20-2007, 06:41
plz CHECK.....ALL NEW FW CPU MT 6226BA NOT GOOD......FLASH PHONE NOT LIVE
TEST T689-6226- O2 MINI-N72I ?????? NOT GOOD
PLZ CHECK
*Diablo*
01-20-2007, 07:45
hi Infinity Team. I have some chinese phones named TEСNO.
they r locked to one operator. with other operators sim card it say insert sim.
i read flash file and send to u with log file. but still no answer.... plz need u help.
thanks
*Diablo*
01-20-2007, 08:06
and one little problem with formatting FFS. after download new latest version CM software, formatting done ok. but phone not power on after it. then i do format with other software, all is ok. tryed on 2pcs N73. plz check
systemworm
01-20-2007, 11:22
There are several types of N73 flash, infinity can not format all of them I think I use flash tool for formatting
Infinity team please help with this
InfinitySupport
01-20-2007, 18:12
@*Diablo*
your Tecno flash file is in work, hope to give some results today-tomorrow.
also, pls, send me by mail some info about this phone:
full text from phone back label and also connector description.
@*Diablo*
@systemworm
if it was some problems wth "format ffs", please, give me "format ffs" log so I can see what is the problem.
*Diablo*
01-21-2007, 06:35
i sent full info.
About formatting, now i have not any chinese phone , when i get it i'll send u formatting log,
But u have to know, Chinese Miracle 1.1 format this phone very well, and phone working w\o problem.
Kanwalgee
01-21-2007, 09:55
I need to pinouts for Sung Ericssun look like W800 SonyEricsson and same system conector at on back sticker only imei no any other info i open the phone but no any RX or Tx showing any help.
Prosesser info is here,
MT6219At
0603-EVS
QGPQ5
MLYLNcd
InfinitySupport
01-21-2007, 12:04
I need to pinouts for Sung Ericssun look like W800 SonyEricsson and same system conector at on back sticker only imei no any other info i open the phone but no any RX or Tx showing any help.
Prosesser info is here,
MT6219At
0603-EVS
QGPQ5
MLYLNcd
Hi,
here is info: http://forum.gsmhosting.com/vbb/showpost.php?p=2212036&postcount=7
sunil kumar
01-21-2007, 12:27
Upload S198,s199 Bird Unlocker
Need Very Urgent
giorgi2002
01-21-2007, 17:43
N73 same pin out like cect s560
/ 1 2 3 4 5 6 \
| 7 8 9 10 11 12
6: Rx
7: Tx
8: Gnd
hi bro, it support MTK 6226 6227 flash 71PL127N?
InfinitySupport
01-23-2007, 09:39
hi bro, it support MTK 6226 6227 flash 71PL127N?
Yes.
for all 6226, 6227: make full backup before any procedure !
dog_baby
01-23-2007, 11:04
I have Problem With CPU Chip MT6226BA and Flash 71PL127N.
After flash with flash file in support : CM_Nokia-N72i_MT6226_S01_Y730_HYF[1].1.12_PCB01_GPRS_MT6227_S01.Y730_HYF3_1_1_YW26_05C _2006-10-16_En_Vn.B0M Phone is DEAD.
Pls fix Prob in MT6226BA(6227).
Thanks Advance.
My phone look like D820 SS , it's named GStar. Chip MT6226M . Anyone have backup of that phone please share for me ! Thank you very much.
B.R
InfinitySupport
01-25-2007, 22:28
I have Problem With CPU Chip MT6226BA and Flash 71PL127N.
After flash with flash file in support : CM_Nokia-N72i_MT6226_S01_Y730_HYF[1].1.12_PCB01_GPRS_MT6227_S01.Y730_HYF3_1_1_YW26_05C _2006-10-16_En_Vn.B0M Phone is DEAD.
Pls fix Prob in MT6226BA(6227).
Thanks Advance.
Do you have original backup from this phone ?
InfinitySupport
01-25-2007, 22:32
Attention for all users !
Always make full backup ("Read flash" function) if you work with phones based on 6226 and newer CPU !
It's VERY important !
How to find CPU name: in my example CPU name is 6227:
=============================================
Device: Autodetect
Checking data, wait...
Action: Read information
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6227:8A02]...
Release Power button now !
=============================================
hi InfinitySupport,i have 6226cpu, 71PL127N flash, is written by me the wrong material, may use Chinese Miracle 1.1 backup full falsh to write the handset?
Heard the encryption position is locked, may decipher?
InfinitySupport
01-27-2007, 11:02
@gsmcall
could you, please, explain more detailed what do you mean ?
@InfinitySupport: please update VietNam language pack for model Everfor E591,E592 which were used MT6226 chip.(It's look like O2 mini phone)..thank you.
And..Why can't i make full backup for this phone? Please see log below:
Reading [flash_part_1_of_2]...
file saved: Backup_flash_part_1_of_2_2007-1-27_22-13-0.B0X.bin
Reading [flash_part_2_of_2]...
Err: wrong answer[3B]
Finished, time used: 183 sec
Remove/Install battery now !
InfinitySupport
01-27-2007, 16:40
@InfinitySupport: please update VietNam language pack for model Everfor E591,E592 which were used MT6226 chip.(It's look like O2 mini phone)..thank you.
if you still have this phone on hands pls make this:
check "detect firmware version" box and make "Read info".
pls, tell me firmware version
also, my ICQ: 347191919
And..Why can't i make full backup for this phone? Please see log below:
try again with fully charged battery.
Thanks for fast reply!..This is firmware version: _S01.00_1.BIN =>i can't find flash file for this phone in support area! Please help me revive my phone which was dead aftrer wrong flash file!
~mr_Ten$ion~
01-27-2007, 19:18
>>>>>>>>Thanz Infinity Team ......... Gr8 work ..........thanz
Br
InfinitySupport
01-27-2007, 19:31
Thanks for fast reply!..This is firmware version: _S01.00_1.BIN =>i can't find flash file for this phone in support area! Please help me revive my phone which was dead aftrer wrong flash file!
I need to know what was original phone firmware version.
@InfinitySupport: please update VietNam language pack for model Everfor E591,E592 which were used MT6226 chip.(It's look like O2 mini phone)..thank you.
And..Why can't i make full backup for this phone? Please see log below:
Reading [flash_part_1_of_2]...
file saved: Backup_flash_part_1_of_2_2007-1-27_22-13-0.B0X.bin
Reading [flash_part_2_of_2]...
Err: wrong answer[3B]
Finished, time used: 183 sec
Remove/Install battery now !
i have same problem,please upload that file in support,now my phone is dead!:(
I need to know what was original phone firmware version.
@InfinitySupport:
This phone was dead after wong flash file cause infinity can't detect correct software version.
I tried backup flash of another working everfor E592 (part1+2,eeprom) to flash this phone but still dead.
Please tell me how about this file: CM_MP4_O2_mini-E59_MT6226_OV7660_M503T_D12[1].00.0_M500Z_05C_HW_2006-10-23_En_Vn.B0M I got it in support area 2 week ago.Now,i saw this file has been removed in support are.
Help me,please :mad:
InfinitySupport
01-29-2007, 09:10
@InfinitySupport:
This phone was dead after wong flash file cause infinity can't detect correct software version.
Could you, please, explain, what do you mean ? I don't understand this explanation "cause infinity can't detect". What can't be detected ?
I tried backup flash of another working everfor E592 (part1+2,eeprom) to flash this phone but still dead.
Please tell me how about this file: CM_MP4_O2_mini-E59_MT6226_OV7660_M503T_D12[1].00.0_M500Z_05C_HW_2006-10-23_En_Vn.B0M I got it in support area 2 week ago.Now,i saw this file has been removed in support are.
Help me,please :mad:
This file removed from support area by some reasons.
What was original firmware version in your phone ?
plz what cable can i use to unlock zetta .