"Unlock Success", Pantech C300 [Archive]

bok_46

12-03-2006, 09:03

Here is my Log..

Action: unlock
COM2 selected
Phone must be POWERED-ON !
Cable must be in "DATA" mode !
Connecting, wait...
Phone connected. Working...
file saved: Backup_sp-unlock_log_2006-12-3_16-5-23.8FX.bin
active lock(s) found, working...
Finished, time used: 21 sec
Power-off phone by "Power" button (don't remove battery).

Big thanx to Infinity Team.....:D

inat

12-07-2006, 03:01

wow good for you? can you share about the cable detail?:D

ethiomobile

12-07-2006, 08:01

hi,

WHICH CABLE YOU HAVE USED TO UNLOCK PANTECH c300 AND DO U HAVE THE PIN OUT PLEASE?

tHANKS
Ethio Mobile Soltuions
Here is my Log..

Action: unlock
COM2 selected
Phone must be POWERED-ON !
Cable must be in "DATA" mode !
Connecting, wait...
Phone connected. Working...
file saved: Backup_sp-unlock_log_2006-12-3_16-5-23.8FX.bin
active lock(s) found, working...
Finished, time used: 21 sec
Power-off phone by "Power" button (don't remove battery).

Big thanx to Infinity Team.....:D

benguetcowboy1

12-07-2006, 09:13

keyboard top
1.........24

12: Phone Tx: RJ-45 pin 3
15: Phone RX: RJ-45 pin 2
24: Gnd

Expertcell

12-07-2006, 14:16

works 100% with original cable (switch in data )

ethiomobile

12-11-2006, 10:58

keyboard top
1.........24

12: Phone Tx: RJ-45 pin 3
15: Phone RX: RJ-45 pin 2
24: Gnd

Hi brother,

Thank you for the cable pinout and i have sucessefuly unlocked Pantech C300 here is the log.

But because of the IMEI is 01 it doesn't work here anyways thax for the pinout again.

ethiomobile

12-11-2006, 12:00

Hi brother,

Thank you for the cable pinout and i have sucessefuly unlocked Pantech C300 here is the log.

But because of the IMEI is 01 it doesn't work here anyways thax for the pinout again.

For all,

The IMEI 01 Pantech C300 works with 900/1800 MHZ now phone is ok and works good.

Take Care
Ethio-Mobile-Solutions

H.Y.K

12-11-2006, 12:29

I tried search on google and found C300 doesn't support 900mhz! What does this mean when you said C300 working with 900 mhz Mr ethiomobile ?

InfinitySupport

12-11-2006, 13:20

My personal PG-C300 work perfect in 900/1800 network w/o any problems (I don't know exactly is it works on 900 or 1800).

ethiomobile

12-11-2006, 14:14

I tried search on google and found C300 doesn't support 900mhz! What does this mean when you said C300 working with 900 mhz Mr ethiomobile ?

hi brother,

I am in the frequency of 900/1800Mhz and phone is working fine i unlocked it today.

Take Care
Ethio-Mobile-Solutions

shawgsm

12-11-2006, 16:29

yes pantech works on 900/1800mhz.just unlock one today using furious gold...

vertz

12-12-2006, 14:06

i have unlock one just a few minutes ago using InfinityBox. thanks to bok_46 (bobby) for giving me the confidence.

br

bok_46

12-14-2006, 05:03

wow good for you? can you share about the cable detail?:D

I just follow the supports pin-out..

=== Pantech DATA MODE ===

keyboard top
1.........24

3: connect to phone pin 4
4: connect to phone pin 3
10: Phone Rx: RJ-45 pin 2
11: Phone Tx: RJ-45 pin 3
24: Gnd

br. bok_46

bok_46

12-14-2006, 05:07

hi,

WHICH CABLE YOU HAVE USED TO UNLOCK PANTECH c300 AND DO U HAVE THE PIN OUT PLEASE?

tHANKS
Ethio Mobile Soltuions

I just modified my cable , Look for an extra lg7050 cable and simply follow the supports pin-out..

=== Pantech DATA MODE ===

keyboard top
1.........24

3: connect to phone pin 4
4: connect to phone pin 3
10: Phone Rx: RJ-45 pin 2
11: Phone Tx: RJ-45 pin 3
24: Gnd

Good luck ....:D

mrfixit

12-17-2006, 00:59

My personal PG-C300 work perfect in 900/1800 network w/o any problems (I don't know exactly is it works on 900 or 1800).

specifications of c300 pantech:
GSM: 850 / 1800 / 1900
Phone's dimensionsDimensions 2.8" x 1.7" x 0.7" (70 x 43 x 18 mm)
Phone's weightWeight 2.5 oz (70 g)
display Size: 128 x 128 pixels
Colors: 26144
battery Capacity: 850 mAh
Stand-by time: 250 hours
Talk time: 2.50 hours

so we know that it would not work with any 900 mhz network

crazy71

12-20-2006, 17:17

hi,somebody can tell me how i put tha cable in data mode for c300 infinity box and the unlock procedure??thanks

InfinitySupport

12-20-2006, 22:57

hi,somebody can tell me how i put tha cable in data mode for c300 infinity box and the unlock procedure??thanks

How to put cable in data mode: use pinout for "DATA MODE" cable from support area
Unlock procedure:
connect cable
connect phone
power on phone
press unlock button

ethiomobile

02-07-2007, 17:16

hi Brother,

I want to know exactly which color of cables are to be conected to 3,4,10,11 AND 24 to make cable using LG7050 phone.

I just modified my cable , Look for an extra lg7050 cable and simply follow the supports pin-out..

Pls replay me via my msn online or here.

Take Care
Ethio-Mobile-Solutions
=== Pantech DATA MODE ===

keyboard top
1.........24

3: connect to phone pin 4
4: connect to phone pin 3
10: Phone Rx: RJ-45 pin 2
11: Phone Tx: RJ-45 pin 3
24: Gnd

Good luck ....:D

InfinitySupport

02-07-2007, 18:29

@ethiomobile
cable wires color has no any standards.
please, use pinout (count pins numbers) instead of use wires colors.

ethiomobile

02-07-2007, 18:46

hi,

WHICH CABLE YOU HAVE USED TO UNLOCK PANTECH c300 AND DO U HAVE THE PIN OUT PLEASE?

tHANKS
Ethio Mobile Soltuions

hello again,

I have made the second time pantech cable using LG 7050 pinout and unlock so I confirm again both ways is possible to unlock this phone .

Take Care
Ethio-Mobile-Solutions

sweetboy

06-30-2007, 23:52

thanks bok 46

for pinouts ' it work unlock pantech c300

cmartinezsv

07-16-2007, 23:01

ok Pinuot in infinity documents iis ok!!!! thx!!!! man!!!

GsmXplorer

07-17-2007, 17:35

it nice to see thanx for informing
wbr

crowys

10-27-2007, 19:18

error infinity pantech c300

COM14 [VCP0] selected
Phone must be POWERED-ON !
Cable must be in "DATA" mode !
Connecting, wait...
error: connection failed, try again !
error: operation not finished properly
Finished, time used: 13 sec
Power-off phone by "Power" button (don't remove battery).

crowys

10-27-2007, 19:19

How to put cable in data mode: use pinout for "DATA MODE" cable from support area
Unlock procedure:
connect cable
connect phone
power on phone
press unlock button

error pantech c300

COM14 [VCP0] selected
Phone must be POWERED-ON !
Cable must be in "DATA" mode !
Connecting, wait...
error: connection failed, try again !
error: operation not finished properly
Finished, time used: 13 sec
Power-off phone by "Power" button (don't remove battery).

InfinityHelp

10-27-2007, 19:45

hello!

do you use tested cable? looks like cable fault

crowys

10-27-2007, 21:57

The cable that came with the box

InfinityHelp

10-27-2007, 22:08

hello!

is this DATA mode cable?

vandal

01-02-2008, 14:30

COM31 selected
Phone must be POWERED-ON !
Cable must be in "DATA" mode !
Connecting, wait...
error: connection failed, try again !
error: operation not finished properly
Finished, time used: 18 sec
Power-off phone by "Power" button (don't remove battery).
am having this problem with pantech c300 unlocking

InfinitySupport

01-02-2008, 23:06

@vandal
Please, double check that you have used correct cable. You can see "DATA MODE" cable information if you select required model in Infinity-Box Shell.

nambenal

01-13-2008, 10:11

pantech c300 unlock ok.

*01763*3641# open WP phone mode enginr
help me

InfinitySupport

01-13-2008, 13:05

pantech c300 unlock ok.

*01763*3641# open WP phone mode enginr
help me

Hello,

Please, explain the problem little bit more detailed, attach text from software Log window.

nambenal

01-13-2008, 13:06

Instructions to exit "enginr mode" :

1.put simcard into phone,
2.power on the phone,(now phone will show Enginr.Mode)
3.now press & keep the upper right button untill see the
phone's main display screen where shows manu & names
function.
4.now enter the code *01763*3640# & then ur phone will be back as normal.
5.enjoy.
test ok

nestone

04-25-2008, 23:00

pls bro help me unlock pantech c300 with furious and infinity box

hanen

04-25-2008, 23:04

keyboard top
1.........24

12: Phone Tx: RJ-45 pin 3
15: Phone RX: RJ-45 pin 2
24: Gnd
thanksssssssssssssssssssssssssss

InfinitySupport

04-26-2008, 08:41

pls bro help me unlock pantech c300 with furious and infinity box

Hello,

Connect cable
Power-on phone
Press software "unlock" button

yemen23

05-19-2008, 12:29

Hello, any body can help me please to unlock my mobile.

i have a pantech PG-C300 that is locked

Pantech PG-C3

Model:PG-C3

FCC ID:JYCPG

IMEI :***

S/N :639064752

UPC :843124000286

InfinitySupport

05-19-2008, 14:13

Hello, any body can help me please to unlock my mobile.

i have a pantech PG-C300 that is locked

Pantech PG-C3

Model:PG-C3

FCC ID:JYCPG

IMEI :***xx

S/N :639064752

UPC :843124000286

I strongly suggest you to respect forum rules to avoid deleted messages in future.

appolo

07-10-2008, 00:07

pantech c300 unlock successfuly
just follow this
=== Pantech DATA MODE ===

keyboard top
1.........24

10: Phone Rx: RJ-45 pin 2
11: Phone Tx: RJ-45 pin 3
24: Gnd

NOTE: no need to do this

3: connect to phone pin 4
4: connect to phone pin 3

tested by me
and here is the log

Action: unlock
COM2 [VCP0] selected
Phone must be POWERED-ON !
Cable must be in "DATA" mode !
Connecting, wait...
Phone connected. Working...
file saved: C:\Program Files\InfinityBox\PNModule\backup_sp-unlock_log_20080709-215837.8FX.bin
active lock(s) found, working...
Finished, time used: 11 sec
Power-off phone by "Power" button (don't remove battery).

thanks infinity team

freedomqn

02-21-2009, 15:02

InfinityN

02-21-2009, 17:44

=== Pantech DATA MODE ===

keyboard top
1.........24

10: Phone Rx: RJ-45 pin 2
11: Phone Tx: RJ-45 pin 3
24: Gnd

NOTE: no need to do this

3: connect to phone pin 4
4: connect to phone pin 3
Action: unlock
COM27 [VCP3] selected
Phone must be POWERED-ON !
Cable must be in "DATA" mode !
Connecting, wait...
Phone connected. Working...
file saved: C:\Program Files\InfinityBox\PNModule\c300\backup_sp-unlock_log_20090221-204638.8FX.bin
active lock(s) found, working...
Finished, time used: 27 sec
Power-off phone by "Power" button (don't remove battery).

it work thx thx

Thank you very much for test report !
Each test report with attached logs is very important for us
so we can see how is Infinity-Box software works, what is phone hardware configuration (f.e. flash chip type)
and what is possible problems (so we will be able to fix it) and successfully done work.

cdmagsm03

02-25-2009, 06:03

=== Pantech DATA MODE ===

keyboard top
1.........24

10: Phone Rx: RJ-45 pin 2
11: Phone Tx: RJ-45 pin 3
24: Gnd

COM6 [VCP0] selected
Phone must be POWERED-ON !
Cable must be in "DATA" mode !
Connecting, wait...
Phone connected. Working...
file saved: C:\Program Files\InfinityBox\PNModule\backup_sp-unlock_log_20090225-005612.8FX.bin
active lock(s) found, working...
Finished, time used: 18 sec
Power-off phone by "Power" button (don't remove battery).

good work infinity team