k750 dead. Won't turn on after W800 flash!

[discodog1]

I had a working k750i that I tried to flash to a W800, the flash completed fine but the phone just flashed with a white screen. Soon after it started to vibrate with nothing on the screen, now, after trying to repair / recover using various versions of setool the phone won't even turn on. :eek:

Can anybody suggest a step by step way of recovering this phone, and the suggested software to do it. I have cruiser cable.

Also, I keep getting ERROR 300312 with semc_tool 3.3

and the following when trying to repair with seTool2

GUI v0.91373/UNI
standalone version engaged.
Card serial:00001283
Loaded 49 flash descriptors
RECOVERY MODE STARTED
Open COM port OK
Recovery:041213 1452 MATCXC1326739_COMPACTCERTLOADER R2L
Fetching phone data from OTP
OTP status:0 locked:1 CID:36 PAF:1 IMEI:xxxxxxxxx CERT:BROWN
bad file, will not flash it.
Recovery failed. Phone dead.
Elapsed:1 secs.


Thanks...

[discodog1]

anybody any ideas?

I have read so much conflicting information on here, anyone got a "definitive" answer? anybody had the same experience???

[discodog1]

managed to flash the following w800 files:
W800_R1BC002_MAIN_EU_EMEA.mbn
W800_R1BC002_FS_EU1.fbn

but got error when trying to complete phone.

GUI v0.91373/UNI
standalone version engaged.
Card serial:00001283
Loaded 49 flash descriptors
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:115200
OTP status:0 locked:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxxxxxxxxCERT:RED
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:36
Speed:115200
OTP status:0 locked:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxxxxCERT:BROWN
Loader:041214 0816 LLECXC1326743_COMPACTPRODUCTION R2AB
Flash ID check:200D
Flash props sent ok
Flashing MAIN firmware: W800_R1BC002_MAIN_EU_EMEA.mbn
CURRENT FLASH FILE CID:36
Matching CID according file...
SSW uses dynamic hash, dynamic hash len is:291
Will flash 291 blocks...
SSW loading returns:0
Flashing FS image: W800_R1BC002_FS_EU1.fbn
CURRENT FLASH FILE CID:36
Matching CID according file...
SSW uses dynamic hash, dynamic hash len is:149
Will flash 149 blocks...
SSW loading returns:0
Don't forget check complete !
Open COM port OK
OTP status:0 locked:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxxxxCERT:RED
CSloader version:
051101 1900 NPACXC1327364_COMPACT_SEMC_CS_LOADER__R3J
loader startup: executed
csloader refused to start fs services,error is:1
loader filesystem startup failed, that is fatal
Elapsed:2641 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:115200
loader payload not accepted
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:4 secs.
Open COM port OK
Elapsed:2 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
OTP status:0 locked:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxxxxCERT:RED
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:36
Speed:921600
OTP status:0 locked:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxCERT:BROWN
Loader:041214 0816 LLECXC1326743_COMPACTPRODUCTION R2AB
Flash ID check:200D
Flash props sent ok
Flashing FS image: W800_R1BC002_FS_EU1.fbn
CURRENT FLASH FILE CID:36
Matching CID according file...
SSW uses dynamic hash, dynamic hash len is:149
Will flash 149 blocks...
SSW loading returns:0
Don't forget check complete !
Open COM port OK
OTP status:0 locked:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxCERT:RED
CSloader version:
051101 1900 NPACXC1327364_COMPACT_SEMC_CS_LOADER__R3J
loader startup: executed
csloader refused to start fs services,error is:1
loader filesystem startup failed, that is fatal
Elapsed:189 secs.

[jamespond]

Try to reflash with right flash files.

The .mbn files are semctool flashes.
The flash files must be in .st2 format for setool2

If you need some help PM for me.

[GSM MIND]

managed to flash the following w800 files:
W800_R1BC002_MAIN_EU_EMEA.mbn
W800_R1BC002_FS_EU1.fbn

but got error when trying to complete phone.

GUI v0.91373/UNI
standalone version engaged.
Card serial:00001283
Loaded 49 flash descriptors
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:115200
OTP status:0 locked:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxxxxxxxxCERT:RED
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:36
Speed:115200
OTP status:0 locked:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxxxxCERT:BROWN
Loader:041214 0816 LLECXC1326743_COMPACTPRODUCTION R2AB
Flash ID check:200D
Flash props sent ok
Flashing MAIN firmware: W800_R1BC002_MAIN_EU_EMEA.mbn
CURRENT FLASH FILE CID:36
Matching CID according file...
SSW uses dynamic hash, dynamic hash len is:291
Will flash 291 blocks...
SSW loading returns:0
Flashing FS image: W800_R1BC002_FS_EU1.fbn
CURRENT FLASH FILE CID:36
Matching CID according file...
SSW uses dynamic hash, dynamic hash len is:149
Will flash 149 blocks...
SSW loading returns:0
Don't forget check complete !
Open COM port OK
OTP status:0 locked:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxxxxCERT:RED
CSloader version:
051101 1900 NPACXC1327364_COMPACT_SEMC_CS_LOADER__R3J
loader startup: executed
csloader refused to start fs services,error is:1
loader filesystem startup failed, that is fatal
Elapsed:2641 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:115200
loader payload not accepted
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:4 secs.
Open COM port OK
Elapsed:2 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
OTP status:0 locked:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxxxxCERT:RED
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:36
Speed:921600
OTP status:0 locked:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxCERT:BROWN
Loader:041214 0816 LLECXC1326743_COMPACTPRODUCTION R2AB
Flash ID check:200D
Flash props sent ok
Flashing FS image: W800_R1BC002_FS_EU1.fbn
CURRENT FLASH FILE CID:36
Matching CID according file...
SSW uses dynamic hash, dynamic hash len is:149
Will flash 149 blocks...
SSW loading returns:0
Don't forget check complete !
Open COM port OK
OTP status:0 locked:1 CID:36 PAF:1 IMEI:xxxxxxxxxxxxxCERT:RED
CSloader version:
051101 1900 NPACXC1327364_COMPACT_SEMC_CS_LOADER__R3J
loader startup: executed
csloader refused to start fs services,error is:1
loader filesystem startup failed, that is fatal
Elapsed:189 secs.


USE NEW FRIMWARE ALSO WRITE GDFS IN FORMAT.SWW AND FLASH UR PHONE ALL WELL BE OKEY OR TELL ME THAT HOW U FLASH UR PHONE

REGARDS

GSM MIND

[teknisi bloon]

USE NEW FRIMWARE ALSO WRITE GDFS IN FORMAT.SWW AND FLASH UR PHONE ALL WELL BE OKEY OR TELL ME THAT HOW U FLASH UR PHONE

REGARDS

GSM MIND

in which table we put gdfs_with_ssw format? in "Files" table or "MISC Files" table?

[algerienbox]

flash gdfs in ssw format +erom + full flash+unlock