View Full Version : K800i - cant recognise
Im trying to fix red blinking problem with EROM recovering, but when I insert my phone - it can't recognise it...USB driver seems same as for davinci program, and when i run davinci it recognise my phone as SEk800i, but I can't buy log for davanchi while I can for kulankendi.Please help!Thank you.
All it says:Hold 2 and 5 buttons together and plug DCU60 USB cable.Phone Connected...Detected: Unknown! Series
yashirotcm
12-31-2006, 23:01
I get the exact same error!
ryaz1993.
01-01-2007, 17:09
try this
remove battery and sim card from phone
reinsert battery
then u press and hold "c" button and connect dcu60 cable
then u install drivers
and repair your phone EROM and flash it
regards'
ryaz
KulanKendi
01-02-2007, 15:32
Thanks for explantations :)
For more precise:
1. When phone is RED blinking, remove battery, disconnect cable from phone, put battery back.
2. Hold 2+5 keys, plug cable to phone, windows will detect phone, install USB drivers.
3. Remove battery, disconnect cable from phone, put battery back.
4. Select EROM UPDATE option, click FLASH button, Hold 2+5 keys, plug cable to phone, EROM update procedure will start.
5. After EROM update, remove battery, disconnect cable, put battery back, power on phone.
try this
remove battery and sim card from phone
reinsert battery
then u press and hold "c" button and connect dcu60 cable
then u install drivers
and repair your phone EROM and flash it
regards'
ryaz
Thanks for explantations :)
For more precise:
1. When phone is RED blinking, remove battery, disconnect cable from phone, put battery back.
2. Hold 2+5 keys, plug cable to phone, windows will detect phone, install USB drivers.
3. Remove battery, disconnect cable from phone, put battery back.
4. Select EROM UPDATE option, click FLASH button, Hold 2+5 keys, plug cable to phone, EROM update procedure will start.
5. After EROM update, remove battery, disconnect cable, put battery back, power on phone.
¿Con que cable se debe de hacer, con DCU-60 o con cruiser?
¿y si es con cruiser como? no lo detecta el programa
Disculpar mi ingles, soy español
Mi telefono tiene la erom mal y al intentar encender parpadean los IR y no enciende.
With which cable one should make, with DCU-60 or with cruiser?
and if it is with cruiser like? it doesn't detect it the program
To excuse my English, i am Spanish
My phones with damaged EROM ( red led blinking ), is k800i CID 49 R1ED001
With which cable one should make, with DCU-60 or with cruiser?
and if it is with cruiser like? it doesn't detect it the program
To excuse my English, i am Spanish
My phones with damaged EROM ( red led blinking ), is k800i CID 49 R1ED001
DCU-60!!
Here is another tip: Charge batt full first (usually blinking may be two problem : low batt or EROM problem). Then take out batt and cable longer (up to 5 mins), this may help.
KulanKendi
01-25-2007, 11:47
U can use DCU60 and COM port cable(only EROM Update)
1. For use DCU60 cable U just push 2+5 in phone and select "EROM Update" in client and click Flash button.
2. For COM port/Virtual COM etc, click SETTINGS small button, new window will pop up, then click DETECT button(it can take few seconds, dipend how many devices what can emulate com port are connected). U will see ALL available COM ports and all possible speeds what KKClient can work with it. Select COM port and select "Use RS232 Communication" and ACCEPT. now KKClient will use only COM port like Cruiser etc. repeat step 1 to update EROM.
For set cable type back to DCU60, just deselect "Use RS232 Communication" and click ACCEPT.
b.r.
¿Con que cable se debe de hacer, con DCU-60 o con cruiser?
¿y si es con cruiser como? no lo detecta el programa
Disculpar mi ingles, soy español
Mi telefono tiene la erom mal y al intentar encender parpadean los IR y no enciende.
With which cable one should make, with DCU-60 or with cruiser?
and if it is with cruiser like? it doesn't detect it the program
To excuse my English, i am Spanish
My phones with damaged EROM ( red led blinking ), is k800i CID 49 R1ED001
No puedo conectarlo con el DCU-60 porque mi telefono esta con la erom mal (IR parpadean al intentar encender) y no lo detecta Windows.
Con el cable cruiser (TMS) esta en el com 13 Selecciono EROM UPDATE option, le doy a FLASH button, aprieto teclas 2+5, conecto el cable al teleono y me dice:
Connect and Power ON phone. Y ahi se queda y no hace nada mas ni dice nada.
I cannot connect it with the DCU-60 because my telephone this with the bad erom (red led blinking) and it doesn't detect it Windows.
With the cable cruiser (TMS) this in the com 13 Select EROM UPDATE option, click FLASH button, Hold 2+5 keys, plug cable to phone and he/she tells me:
Connect and Power ON phone.
And there he stays and he doesn't make anything but neither he says anything.
KulanKendi
01-25-2007, 15:50
use DCU60 cable for this test.
try this way carefully:
1. be sure that battery is charged(take from another phone)
2. disable option "Use RS232 Communication" and click ACCEPT, so U will use DCU60 cable
3. remove battery and cable from phone, put back battery
4. select "EROM UPDATE" option ONLY and click FLASH
5. Hold 2+5 keys together(be sure that U push both keys), and plug cable to phone
6. If U had drivers installed then windows will only play "usb plugged" sound, if U have not installed then windows should find new hardware and ask for drivers.
If windows detect it as unknown or can't detect then probably:
1. Battery is discharged
2. Phone is like "hanged", remove battery for 10-30 min and put back and try EROM Update procedure.
b.r.
No puedo conectarlo con el DCU-60 porque mi telefono esta con la erom mal (IR parpadean al intentar encender) y no lo detecta Windows.
Con el cable cruiser (TMS) esta en el com 13 Selecciono EROM UPDATE option, le doy a FLASH button, aprieto teclas 2+5, conecto el cable al teleono y me dice:
Connect and Power ON phone. Y ahi se queda y no hace nada mas ni dice nada.
I cannot connect it with the DCU-60 because my telephone this with the bad erom (red led blinking) and it doesn't detect it Windows.
With the cable cruiser (TMS) this in the com 13 Select EROM UPDATE option, click FLASH button, Hold 2+5 keys, plug cable to phone and he/she tells me:
Connect and Power ON phone.
And there he stays and he doesn't make anything but neither he says anything.
use DCU60 cable for this test.
try this way carefully:
1. be sure that battery is charged(take from another phone)
2. disable option "Use RS232 Communication" and click ACCEPT, so U will use DCU60 cable
3. remove battery and cable from phone, put back battery
4. select "EROM UPDATE" option ONLY and click FLASH
5. Hold 2+5 keys together(be sure that U push both keys), and plug cable to phone
6. If U had drivers installed then windows will only play "usb plugged" sound, if U have not installed then windows should find new hardware and ask for drivers.
If windows detect it as unknown or can't detect then probably:
1. Battery is discharged
2. Phone is like "hanged", remove battery for 10-30 min and put back and try EROM Update procedure.
b.r.
1. battery is charged, ok
2. disable option "Use RS232 Communication" and click ACCEPT, ok
3. remove battery (30 min) and cable from phone, put back battery, ok
4. select "EROM UPDATE" option ONLY and click FLASH, ok
5. Hold 2+5 keys together, and plug cable to phone, ok
6. windows not sound, and windows not new hardware and ask for drivers (The dirver installs them with another k750 and they are well installed)
only : Hold 2 and 5 buttons together and plug DCU60 USB cable.
And there he stays and he doesn't make anything but neither he says anything.
I repeat, myphone is with damaged EROM ( red led blinking )
Do I thank your help, some suggestion? my kkclient is 1.41
Hi
My phone has the EROM damaged.
Like i said, i have a K800 CID49.
I have the DCU-60 and a TMS cable (Service Cable)
I probed all:
2+5, holding "C", power on, all the things.
I probed with DCU-60 and with the TMS cable.
Nothing works.
I have a question: If my phone is with the EROM damaged, NEVER will turn on, so, Windows never detect new hardware.
Please, i really want to repair my dead phone.
Help me please.
Thanks a lot.
Bye
KulanKendi
01-27-2007, 12:02
So it's problem, if even RS232 communication don't works then looks like:
1. EROM completly erased.
2. Hardware problem
3. Phone CPU is in "freeze mode" ( I name it like this)
for be sure for 100% U can open phone and short + and - on realtime battery for few seconds. This is small battery solderer on phone pcb.
Let me know if it helps
b.r.
Hi
My phone has the EROM damaged.
Like i said, i have a K800 CID49.
I have the DCU-60 and a TMS cable (Service Cable)
I probed all:
2+5, holding "C", power on, all the things.
I probed with DCU-60 and with the TMS cable.
Nothing works.
I have a question: If my phone is with the EROM damaged, NEVER will turn on, so, Windows never detect new hardware.
Please, i really want to repair my dead phone.
Help me please.
Thanks a lot.
Bye