china n91 pinout need urgently

[.::Zafar Communication::.]

hi

need urgently nokia 91 china


thanks and regards


Zafar Janjua

[InfinitySupport]

Hello,

http://forum.gsmhosting.com/vbb/showpost.php?p=2163163&postcount=180

What to do if you have "Made in China" phone but you don't have pinout:

1. what is full phone name
2. what is full text from phone back label
3. what is phone bottom connector type ?
4. attach phone connector photo (if possible)
5. go to support area, download existing pinouts and try to use pinouts from support area that looks suitable for you phone connector
6. if no luck: open phone, probably you will see test points with "Rx", "Tx", "Gnd" marks
7. if no luck: find on phone bottom connector all "Gnd" pins, all "+ battary" pins and all "charge" pins and give me this info (InfinityHelp@yahoo.com.hk), we will try to find pinout.

[.::Zafar Communication::.]

Hello,

http://forum.gsmhosting.com/vbb/showpost.php?p=2163163&postcount=180

What to do if you have "Made in China" phone but you don't have pinout:

1. what is full phone name
2. what is full text from phone back label
3. what is phone bottom connector type ?
4. attach phone connector photo (if possible)
5. go to support area, download existing pinouts and try to use pinouts from support area that looks suitable for you phone connector
6. if no luck: open phone, probably you will see test points with "Rx", "Tx", "Gnd" marks
7. if no luck: find on phone bottom connector all "Gnd" pins, all "+ battary" pins and all "charge" pins and give me this info (InfinityHelp@yahoo.com.hk), we will try to find pinout.

Nokia
model N91
type:RH-64
IC:661U-RH19


i have usb cable plus charger

8pin mini connector

thanks for immidiate reply


thanks & regards


Zafar Janjua

[InfinitySupport]

Hi,

cool info about phone. It looks like you did not read my previous message carefully.

where is 4 USB wires located (+V, Usb-, Usb+, Gnd) on phone connector ?

also, if phone has 8 pin mini-usb connector: check support area to see standard pinout for 8-pin miniusb connector

[halongmobile]

connector_1x8_mini.gif
1: Gnd
2: Tx
3: Rx

[stivubicco]

connector_1x8_mini.gif
1: Gnd
2: Tx
3: Rx

yes it tested with me and works perphect thanx:)

[el-safwa]

connector_2x6_mini.
any help

[InfinityHelp]

hello el-safwa!

what help you need with connector 2x6?

[el-safwa]

hi sir yes my phone n91

.................................................. .....my connector_2x6_mini .............................


and I understand tihis post


Due to a lot of different models with the same name but absolutely different hardware (f.e. exist at least 5 phones with name "Chinese Nokia-N95" but different pinouts),
bottom connectors and different pinouts we recommend you to include the next info:
1. detailed description of model
2. phone CPU chip name
3. phone PCB photo (Rx/Tx/Gnd test-points may exist on phone PCB)
4. attach phone photo
5. attach phone bottom connector photo
6. include information about Gnd and Charge pins on phone bottom connector
After you have this information prepared, check the next detailed description how to get pinout for your model:
use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297
if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle\
if not helps, please read: http://www.gsmhosting.com/vbb/showpo...36&postcount=7
if not helps, please read: http://www.gsmhosting.com/vbb/showthread.php?t=433447

[InfinitySupport]

@el-safwa
Very good that youmhave read and understand. Now it's time to follow all steps that was given in my instruction.

[AL - YASEEN]

hi

need urgently nokia 91 china


thanks and regards




Zafar Janjua


Just open the phone and remove the black sticker from the circuit u will get the rx,tx,gnd printed on the board.



B,r.

[MGT SOFTWARE]

yes it tested with me and works perphect thanx:)

can you post or upload circuit diagram for n91