PDA

View Full Version : BE4 v139 PLEASE HELP ME !!!

evilspell
03-22-2002, 21:49
Hi,
Could you help me to unlock this version please (be4 v139) ?
best regards
Evilspell
jarys
03-23-2002, 01:29
http://alcatel.prolidi.cz/software.html

read flash -> unlock it -> write back to phone
evilspell
03-24-2002, 03:09
Hi,
Thanks for your answer,but i tried to read the flash and also with extern power but impossible!!
?????
best regards
Evilspell
din
03-24-2002, 04:20
What sw have you used? Where is the problem with reading flash? You cannot connect or what ?
evilspell
03-24-2002, 06:32
hi Din,
i tried with Mcomm2002,Martech v1.91 and Alca Flasher by Vygis v1.51 but nothing happened (only 4% reading)!!
best regards
Evilspell
Abe
03-24-2002, 08:33
Try the GsmBoy flasher
hacker1gsm
03-24-2002, 10:22
hi evilspell
contact me plz
icq 112906176

regards
din
03-25-2002, 14:03
Maybe your battery is low
evilspell
03-26-2002, 01:46
Hi,
I know that there is some sw with only "unlock bottom" ,so if someone can help me ???
all my thanks to Din ,Abe,Jaris and Hacker1gsm for your help.
Evilspell
din
03-26-2002, 13:29
I have never heard about FREE sw for BE4 v139, except the DUMP UNLOCKER by OrbiTele, but you must read/write flash.

I know about only one BE4 v139 unlocker in 2 seconds, which is NOT for about 200USD, but ONLY for 50 USD. If you want to see it, you can have a look on my web.

If you will look on my web in FREE section, you will find there Alcatel ToolBox. Try to read your BE4 with this sw. Maybe it will better work than another sw you have tried.

But you haven`t answered on my question: Is your battery GOOD charged ?
Bert
03-26-2002, 13:32
Hello
For read/write or unlock alcatel be series phone I never use the battery, if you need the schematic , contact me :)
evilspell
03-26-2002, 17:39
To Din,
Thanks for your help man!!
yes my battery was full.
I've tried with tool box v1.015,i've extract the flash now .
Also Thanks to Bert,but i leave now this cheat phone!!!
best regards and thanks for all the help
Evilspell