K800 update

[emil3d]

after many tries of updating my K800i with kulan kendi
i have:


Color: Red ; OTP CID: 49
EROM CID:51
Phone Model:K800i
Operator:ORANGE_GEN
CDA: CDA102511/108 R3A
Phone Firmware:R1GB001

When i start phone i get "configuration error, contact...."
what can i do?

[Daves69Man]

Did you Finalize OK?

[sprakash]

flash with latest ver. both arm and fs after that give "customize fs "
then from the File System tab, select the "Shutdown FS button"
i hope your problem will slove

[emil3d]

flash with latest ver. both arm and fs after that give "customize fs "
then from the File System tab, select the "Shutdown FS button"
i hope your problem will slove


where is customize fs?
am i blind?

[KulanKendi]

For correct flashing use "Finalization" option when U flashing phone.
When U flashing only MAIN file then U don't need to use Finalization, this option is required when U flash FS(or both) file(s).
After flash phone power on and wait till "please wait..." will dissapear.
I hope U have account with credit(s) :)

b.r.

after many tries of updating my K800i with kulan kendi
i have:


Color: Red ; OTP CID: 49
EROM CID:51
Phone Model:K800i
Operator:ORANGE_GEN
CDA: CDA102511/108 R3A
Phone Firmware:R1GB001

When i start phone i get "configuration error, contact...."
what can i do?

[HOUSEQUAKE]

Mr Kendi, I too am having major problems with my K800i on Orange network.

I have installed latest client and downloaded:

Main: K800i_R1GB001_MAIN_ORANGE_CID51.min
FS: K800i_R1GB001_FS_ORANGE_GEN_CID51.fsm

I can only get phone to connect using keys 2+5, if I try C button I get nothing.

I press Read Info and use keys 2+5 with the following result:

Hold 'C' button and plug DCU60 USB cable.
Phone Connected...
Detected: DB2020: K610,K790,K800,W850,V630,W710i(c),Z710i(c),Z610 Series
Error: K
Wrong BOOT mode!Be sure that You hold 'C' Key.

So next I try to Flash phone using C key and get:

Hold 'C' button and plug DCU60 USB cable.
Phone Connected...
Error: No response.Remove battery and put back.

So now I try to Flash phone, selecting EROM update button and use keys 2+5 with this result:

Hold 2 and 5 buttons together and plug DCU60 USB cable.
Phone Connected...
Detected: DB2020: K610,K790,K800,W850,V630,W710i(c),Z710i(c),Z610 Series
Flash ID: 0x897E - Supported
Error: EROM CT FL Not Accepted!

PLease, what is wrong???

[emil3d]

for read info you need to press C
after u use c or 2+5 key to boot the phone second time you plug the phone you need to remove battery and put it back
2+5 key is only for updating erom, for flashing, read info and so you need to press c
first read info, check the erom cid, use the proper firmwire

[KulanKendi]

correct. thanks emil3d.
HOUSEQUAKE: After every operation remove battery and put back.

b.r

for read info you need to press C
after u use c or 2+5 key to boot the phone second time you plug the phone you need to remove battery and put it back
2+5 key is only for updating erom, for flashing, read info and so you need to press c
first read info, check the erom cid, use the proper firmwire

[HOUSEQUAKE]

Hi and thanks for the reply, maybe I didn't say that it won't respond to the C key, only 2+5.

I have like you said, been removing the battery after/before every attempt.

I have now been informed that it is one of two things:

1. An unsupported certifiacte
2. Problem with security zone

I still don't know how normal every day use could have brought either of these about though

[KulanKendi]

If phone is working(power on) then it must connect with C key pressed.
Is better to remove battery than power off phone, coz when U power off normally then phone need really 3-5 seconds to shut down all(U really see that is totally off).
Try this:

1. remove battery and cable from phone.
2. put back
3. Hold C Key and plug cable
4. Click read info in KKClient

b.r.

Hi and thanks for the reply, maybe I didn't say that it won't respond to the C key, only 2+5.

I have like you said, been removing the battery after/before every attempt.

I have now been informed that it is one of two things:

1. An unsupported certifiacte
2. Problem with security zone

I still don't know how normal every day use could have brought either of these about though