my new dreambox 2 didnt even work for a minute!!!!

[Sigma]

--- Updating Box Firmware------------------------------------------------------
Connecting to server ...OK
Warning : Update not found.

There are no new updates on server
or your device is already up to date
Done.

--- Reading Box Info-----------------------------------------------------------
Box SN : XXXX
Firmware Version : 0
Firmware Build Info : 2329 19 May 2006 15:00:02
Hardware version : 1.2
Done.


what shuold i do?

[DreamSupporter]

Hello, Dj_SiGma!
Please, send me by PM a serial number of your box and we will help you.

[Sigma]

still not working ! :(

[GSM Dream]

Try to update it again now.

[bibi019]

hi best team
Mr i have a big problem with mu dreambox when i do any operation it say battery volt 0mv
power is shorted to ground whan i habe opened the box i found the the diod B2 is damaged near the usb port with witch one i can repalece them thanks in advance
Abdelouahab
its very very emergency i wait your reply verry verry soon
bibi192004@yahoo.fr

[GSM Dream]

To bibi019
Please check your mailbox.

[west_bound]

To bibi019
Please check your mailbox.
hi i have the same problem too..pls help me
br

[DreamSupporter]

hi i have the same problem too..pls help me
br
Hi, west_bound!
If you can not update your box, please, run Read Box Info and then Update Firmware and send me an information from logs by Pm and we will help you with update ;).

[west_bound]

Hi, west_bound!
If you can not update your box, please, run Read Box Info and then Update Firmware and send me an information from logs by Pm and we will help you with update ;).

thanks Dream Supporter
i think i blew a diode near the usb. due to grounding or wrong testpoint. anyway i substituted the SMD diode with a low wattage type and the box is working now....
can you post the value and power rating of the original SMD diode here so that users can find the replacement part and keep to the box's specs ?
br

[DreamSupporter]

thanks Dream Supporter
i think i blew a diode near the usb. due to grounding or wrong testpoint. anyway i substituted the SMD diode with a low wattage type and the box is working now....

In the next time, if you will connect TP to ground, probably will be a problem with this diode.
We replaced this diode by resistor in new DreamBox Plus.

[mamirza]

In the next time, if you will connect TP to ground, probably will be a problem with this diode.
We replaced this diode by resistor in new DreamBox Plus.


Hi !

shall b grateful if u kud specify resistor value in ohms with modification schematic.

U shall agree as this a matter of product improvement, thus mimizing downtime !

Best regards,:)

[nirvanka]

hi. use resistor: 5.6 ohm + 5% 0.25 Watt minimum

[bibi019]

hi i have alredy the probleme in my dreambox always it say power is shorted to ground inside the box i found the the diod B2 is damaged near the usb port i changed them with resistor 5.6 ohm the problem still now i want to try the change in BoxImproveManual witch you have send to me but i can't find th max810r sheet any where if you can tell me where i can found it in ant motherboard of pc or cellphone or any things because i don't find them at salle
thanks in advance i wait you reply best team
bibi192004@yahoo.fr

[DreamSupporter]

Hello!
Please, check your PM. Thanks.