opo
01-29-2007, 14:16
For this operation, you can use cable from the following boxes: UFS, Twister, Jaff, N-box, Uni-box, Griffin (not compatible with GTI, MT-Box, PBB, PBB II ). Also I have found various type of cable on the market, some long cable (had problem even with UFS)and some small cable, very good connection. If the cable you have doesn't work with UFS, it will not work with Blueclip.
How to use:
* You can use either 9v power supply or USB cable connected to PC
* Connect phone to Blueclip on Special RJ-45 connector on the right side of the clip.
* Power on the phone, and wait until the phone display "Insert Sim card".
* Now choose from the menu <Nokia> and <DCT4> if you just want to unlock or <DCT4+Factory> if you want also to reset the phone to Factory settings.
* Now press RIGHT button on the clip The phone will reboot and enter in "Local Mode". The clip will itself detect the phone ASIC and will execute the correct operation. Here some people have made mistake by pressing CANCEL button. You have in the right one button named RIGHT(sorry to mention this but since some people have already made the mistake, I had to mention it)
The phone is unlocked.
How to use:
* You can use either 9v power supply or USB cable connected to PC
* Connect phone to Blueclip on Special RJ-45 connector on the right side of the clip.
* Power on the phone, and wait until the phone display "Insert Sim card".
* Now choose from the menu <Nokia> and <DCT4> if you just want to unlock or <DCT4+Factory> if you want also to reset the phone to Factory settings.
* Now press RIGHT button on the clip The phone will reboot and enter in "Local Mode". The clip will itself detect the phone ASIC and will execute the correct operation. Here some people have made mistake by pressing CANCEL button. You have in the right one button named RIGHT(sorry to mention this but since some people have already made the mistake, I had to mention it)
The phone is unlocked.