V3 LCD & Camera problems!

[Skippy]

Hi all,

I have here a V3 with 2 problems that I can't find sollution.

This is a water damaged phone, that the LCD is allways too bright, even when I put brightness to the minimum value, and when I select the camera, I allways get a noisy imge on LCD, It looks like analog TV ehehe.

I inserted a good working board to test FLEX and Camera, and ALL is OK, so the problem is only on the board.

I already performed a repair PDS, FULL flash with the latest firmware availabble, Master reset, Master Clear, and cleaned the board 3 times, each time 30min long in the Ultrasound cleaning machine.

I had to make the jumper procedure in the Q960IC pads because the phone booted and worked fine, but no Display and no Lights.

Is there anyone that had this malfunction on a V3?

Thanx in advance,
Skippy

[Blitzkrieg_Hop]

Hi, did u try to flash it via pst? sometimes i have phones like this that on smart-clip after i flash stay with this problem, but if i flash through pst it works fine.

[Skippy]

Hi,

Yes I already tried to Flash with PST and with RSD_LITE.

The other board I tried that worked fine, I FULL flashed It with Smart-Clip and it works fine.

Thanks,
Skippy
Hi, did u try to flash it via pst? sometimes i have phones like this that on smart-clip after i flash stay with this problem, but if i flash through pst it works fine.

[Skippy]

Hi,

Search for Q960 IC and you will find the solluton.

Regards,
Skippy

help PLZ any boddy motorola V3 power on but donot sow display
& display light varry argent solve this prov???????????

[lethanhnghi]

lcd proplem,.,. resunt camera proplem oki