whats wrong with c75

[uqbah]

dear sir i recieved c75 on beep today which went to this on free unlocking soultion try ...
i flashed it but same result whats else i should do...

log i s here

Power On the phone ... OK
Hint : Now the probe might be disconnected
Sending loader ... OK
Testing RAM ...OK
Flash Chip = Intel 28F256L18T, size 32768 Kb
Flash IMEI = 356272-00-399140-8
Bootcore: SIEMENS C7V
Warning : Check phone model selection.
Firmware: SIEMENS C75 v13 lg95
Warning : Firmware info different from Bootcore.!!!
Phone IMEI = invalid IMEI
SPLock FAILED
Warning : setting default lock data
Setting IMEI = 356272-00-399140-8
Writting speed is 64746 cps
Hint : Please connect next phone

Power On the phone ... OK
Hint : Now the probe might be disconnected
Sending loader ... OK
Testing RAM ...OK
Flash Chip = Intel 28F256L18T, size 32768 Kb
Flash IMEI = 356272-00-399140-8
Bootcore: SIEMENS C7V
Warning : Check phone model selection.
Firmware: SIEMENS C75 v13 lg95
Warning : Firmware info different from Bootcore.!!!
Phone IMEI = 356272-00-399140-8
SPLock CRC = OK
Phone Code = < NOT SET > : FF
Setting IMEI = 356272-00-399140-8
Writting speed is 64912 cps

waiting for ur reply
br khalid

[GSM Dream]

Sorry, but I can't understand what do you mean...

[uqbah]

dear sir its mean that set is still dead how to revive this phone ...
when i power on the phone it only give beep and nothing else ...
what i should do know..
thanks for ur reply
br khalid

[DreamSupporter]

dear sir its mean that set is still dead how to revive this phone ...
when i power on the phone it only give beep and nothing else ...
what i should do know..
thanks for ur reply
br khalid
Hi, uqbah!
Please, do the next:
1. Select Options -> Siemens -> Repair setup table after flashing firmware area.
2. Select Options -> Siemens -> Repair IMEI after flashing EEFULL or EELITE area (use OTP IMEI).
3. Run Repair IMEI (Use factory IMEI from flash OTP area).

[salim86]

i had the same prob. now its ok but the phone reset when the sim in it . its ok with out sim only :(

[notgood]

dear sir its mean that set is still dead how to revive this phone ...
when i power on the phone it only give beep and nothing else ...
what i should do know..
thanks for ur reply
br khalid
-------------------------------------------------------------------------

try to flash the phone again DON"T FORGET the way like dreamsupporter said
after flashing, DO repair securities data, don't forget cek the use imei from flash OTP and then do unlock all lock,

i try flashing this way in 5 phone c75 and it's 100% succes

sorry bad english

BR

notgood

[rukon_nishi]

flash it again then repair imei using otp imei, then unlock it.

[vampire13]

I have same problem with c75.i try to full flash but nothing.i just want to unlock but the phone become dead.

Read phone info
User selected phone C75 using Test Point boot mode

Power On the phone ... OK
Hint : Now the probe might be disconnected
Sending loader ... OK
Testing RAM ...OK
Flash Chip = AMD S29WS256N, size 32768 Kb
Flash IMEI = 357982-00-438386-3
Phone ID = 470EC5C1
Bootcore = SIEMENS C75
Firmware = SIEMENS C75 v24 lg7

Full flash process
User selected phone C75 using Test Point boot mode

Power On the phone ... OK
Hint : Now the probe might be disconnected
Sending loader ... OK
Testing RAM ...OK
Flash Chip = AMD S29WS256N, size 32768 Kb
Flash IMEI = 357982-00-438386-3
Phone ID = 470EC5C1
Bootcore = SIEMENS C75
Firmware = SIEMENS C75 v24 lg7
File name : D:\DREAM BOX\C Series\C75\C75_110300.fullflash.dtf
Address : 008000 (95638 cps)

Thanks

[DreamSupporter]

Hi, vampire13!
What version of DBSS do you use?
Write fullflash from our support section at www.boot-loader.com. And run Repair Security Data (Use factory IMEI from flash OTP area).

[vampire13]

use latest version DBSS 2.5.flash process always stop. :confused:
Phone was dead when i try to unlock.

Thanks dream supporter

[DreamSupporter]

Please, try to use Force "Safe mode" option.

[vampire13]

Still not working.always hang at this process.

Many thanks

[DreamSupporter]

Still not working.always hang at this process.

Many thanks

Try to choose Slow (Safe Mode) speed in Options!

Don't post screen shots of DBSS with a serial number of your box!