View Full Version : >>Motorola V3 / V3i Charging Problem<<
Hi Guys,
Dose anyne know the solution for V3 charging problem...the phones charging wen plugged to charger but dose not charge the battery
any ideas...pls HELP!!!!!!!!!!!!!
thanx in advance:confused:
samirsana
02-02-2007, 15:05
post rusulta is tested 100%
mobile.gsm
02-06-2007, 12:50
post rusulta is tested 100%
Thank so mucho, good:D
contraicuagio
02-06-2007, 13:14
Thank for schema .
Best & regards
post rusulta is tested 100%
bro , ihave v3x show charging , but say charge complete after few secs , battery not charged.
changed battery and charger , same prob.
any solution ?
samirsana
02-07-2007, 20:39
@TRABEL change r911 IS OK
market_3b2002
02-08-2007, 17:31
SAmirsana I used to change that part aas shown in the picture but
when charger is on the procesor become hot very hot
any idea?
mehedi.h.j
02-08-2007, 18:09
thank u ....................& u.
.:KHALIFA:.
02-23-2007, 22:16
good wrk sana..........
hightechsquare
02-23-2007, 23:47
thanks samir for ur reply in pm but i have a v3 normal so i didn't found the q904 in manual can u help me more
thanks
samirsana
02-24-2007, 08:52
@ hightechsquare
http://rs65.rapidshare.com/files/18001662/v3_no_charging_by_samirsana_2.JPG
rahat ali
02-24-2007, 14:13
thank for sana
...........................
MATRIX.REAL
02-24-2007, 14:23
thanks it work for me
thanks to share
tested today:D :D :D
please how i can open motorola v3
Thanks very much! It's very good for me
samirsana
03-09-2007, 11:26
hir new solution for V3 with patch & jumper for Q958 work 100%%%%%%%%
http://forum.gsmhosting.com/vbb/showthread.php?t=380655
link for download solution http://forum.gsmhosting.com/vbb/attachment.php?attachmentid=97966&d=1172864950
tarunvishal
05-16-2007, 10:18
hello brother plz help me i try to jumper like u suggest after that set doing charging with computer usb but with charger no show charging
..::Mr_Fone::..
05-16-2007, 13:14
thanks MR............. U R VERY GREAT ;)
..::Mr Fone::..
ahhongchai
05-16-2007, 21:53
yes this solution work 1000%%%%
thanks............
but problem is not show charging for v3
i try it.... it workzzzzz.... thanks.....
hsimpsom
05-17-2007, 14:15
Hi,where can find the q904?Is there some phone with that
part?or have to buy it?
thanks
My V3i Batt pin 2 & 3 don't have 2.8VDC, only have 0.1VDC, I tried to change Q904 ic already, still the same, when plug in charger the the phone nothing comes out. Please help & advice.:confused:
..::Sunil::..
07-13-2007, 07:48
Thanks sir your solution is working....
B.r.
Sunil.;)
post rusulta is tested 100%
i having problem with v3 INVALID BATTERY showing pls help me
thanks for the solutoin budyy... great job.. :)
Thanks for your solution
working....
samirsana, thanks a lot!
And I've got v3x. And one of four small bga, that need for charging is not exist after breaking :-( Any ideas...
post rusulta is tested 100%
good jib!
thanks !:p
i have problem with v3i,phone is charging,but dont show charging???:confused::confused:solution for that??:rolleyes:
got the same problem
but cant understand these pictures u guys are posting
anyone could help me
this pictures for not charging,because this circut is for charging,our problem is different!!
dang dinh van
08-21-2007, 17:31
i have problem with V3i , phone untill charging but in waiting mode battery is empty abouet 3h .please help me ??
adrian_1_
08-21-2007, 19:50
i have one v3 and every time i want to charge the battery its unable to charge, anybody can show me the solution in a picture please? :confused:
click190
11-19-2007, 20:08
wen i conect charger it detect usp wat solution
thank u 4 help
tarek hamd
02-09-2008, 16:05
th***x sooo muchhhhhh
nj_suresh
02-15-2008, 08:03
Dear all,
I bought 2 V3 RAZR Motorola and both of them were working fine. By mistake one of the charger got short circuited and stop charging. But the pone is still working fine. Problem is I could not charge the battery through that phone. Instead I can charge that battery with the second phone and put it back in the first one and its working fine. Even I tried to charge with new charger but it is not.
Guru's please help me to solve this problem. Apprecaite your valuable response and help!
Thanks in advance!
imran tec
02-25-2008, 12:10
hey guys pls any one tell me i replace v3i charging ic during removin ic 2 prints damag now set show 21 short how i can alive it bacc pls
samirsana
03-03-2008, 17:26
@imran tec
PLS POST PICTURE
hi
I need charging way for v3i
pls
munnachikku
05-21-2008, 15:53
i have one v3i the problem is charging . i will chek the connector power is came but power is not came in battery connecter . can u gave me the shematic of v3i charging path
gsmstyle_1
05-24-2008, 11:52
Thank you............................................... ....
sanv_singh
05-24-2008, 14:50
Hi Guys,
Dose anyne know the solution for V3 charging problem...the phones charging wen plugged to charger but dose not charge the battery
any ideas...pls HELP!!!!!!!!!!!!!
thanx in advance:confused:
THE SOLUTION WILL BE LIKE FOLLOW THE STEPS BELLOW:
1. CONNECT THE BOARD TO POWER SUPPLY SEE HOW MUCH CURRENT IT IS CONSUMING ,A GOOD BOARD SHOULD CONSUMES ON 30 TO 31 mAMP CURRENT IF IT IS NOT TAKING ANY CURRENT CHECK USB CONNECTOR, NEXT IS ATLUS(POWER MANAGEMENT IC)
2. IF IT IS TAKING MORE CURRENT JUST STRIKE AT ATLUS.
IT MAY SOLVE THE ISSUE.
hamza7995
06-01-2008, 01:35
hello islam kya hall hai app ak
Amazimg experiancethanks alot brother
BIOHAZARD16
03-23-2009, 20:10
Thanks 10000000% Solution
sanv_singh
05-29-2009, 15:02
charging ic ,atlus might be faulty.
Hi Guys,
Dose anyne know the solution for V3 charging problem...the phones charging wen plugged to charger but dose not charge the battery
any ideas...pls HELP!!!!!!!!!!!!!
thanx in advance:confused:
imranparis
10-31-2009, 10:58
hi
I need charging way for v3i
pls
same i also need plz help
MOHAMMED_RAFIQ1
11-05-2009, 15:56
hi guys,
dose anyne know the solution for v3 charging problem...the phones charging wen plugged to charger but dose not charge the battery
any ideas...pls help!!!!!!!!!!!!!
Thanx in advance:confused:
charger ok but mobile is not charging
blaiso85
11-06-2009, 20:28
bro u need a screew driver. open the back cover and unscreew. the nuts. it si very easy