PDA

View Full Version : zv10 unlock problem


garcea10ro
02-06-2007, 09:17
Phone Model: SGH-ZV10
Revision: ZV10BUFD1
IMEI: 359115000676356
Manufacturer: SAMSUNG ELECTRONICS CORPORATION

Reading data from phone...
ERROR - Can't get simlock data from phone!

lins97
02-06-2007, 16:00
Connecting to phone...
ERROR - Can't connect to phone!

Check your cable connection and be sure to select correct port1 (SAMSUNG CDMA Modem)
Remember - Phone must be switched ON with some SIMCARD inside
Trying to unlock z560 useing original data cable that came with phone.

aErOm
02-07-2007, 11:24
Phone Model: SGH-ZV10
Revision: ZV10BUFD1
IMEI: 359115000676356
Manufacturer: SAMSUNG ELECTRONICS CORPORATION

Reading data from phone...
ERROR - Can't get simlock data from phone!
- This error can be coz of Data Phone damaged, ensure that phone data is ok, or try to reflash in case that itīs not ok to restore original data in this phone.

Connecting to phone...
ERROR - Can't connect to phone!

Check your cable connection and be sure to select correct port1 (SAMSUNG CDMA Modem)
Remember - Phone must be switched ON with some SIMCARD inside
Trying to unlock z560 useing original data cable that came with phone.

Verify that phone is well installed as CDMA SAMSUNG MODEM and has no extensions like CDMA MODEM #2 or #3 or something, is this is problem, unistall your CDMA MODEMS and reinstall, be sure that itīs correct installed like "CDMA SAMSUNG MODEM" and try again unlocking itīd be ok then.

Please take a read at Userīs Manual coz this "problems" and "solutions" are almost all explained there to prevent this delay since you ask till I post, take a read on the manual and if problem persists contact me.

Best Regards !!