C72v issue

[07heaven]

Had a C72v for unlocking, choose test point method, selected C72v.
and the following log came up:

- Unlocking------------------------------------------------------------------
User selected phone C72V using Test Point boot mode
Warning : You should conect power to your phone

Power On the phone ... OK
Hint : Now the probe might be disconnected
Sending loader ... OK
Testing RAM ...OK
Flash Chip = AMD S29WS256N, size 32768 Kb
Flash IMEI = 357364-00-515843-0
Bootcore: SIEMENS C72V
Firmware: SIEMENS C72 v22 lg1
Warning : Check phone model selection.
Warning : Firmware info different from Bootcore.!!!
Error : Please select correct model.
Hint : Strict model validation is turned on
Error : Failed.

So then choose, C72, and got the following log:
- Unlocking------------------------------------------------------------------
User selected phone C72 using Test Point boot mode

Power On the phone ... OK
Hint : Now the probe might be disconnected
Sending loader ... OK
Testing RAM ...OK
Flash Chip = AMD S29WS256N, size 32768 Kb
Flash IMEI = 357364-00-515843-0
Bootcore: SIEMENS C72V
Warning : Check phone model selection.
Firmware: SIEMENS C72 v22 lg1
Warning : Firmware info different from Bootcore.!!!
Phone IMEI = 357364-00-515843-0
SPLock CRC = OK
Phone Code = < NOT SET > : FF
Writting speed is 240 cps
Done.

[DreamSupporter]

Hello, 07heaven!
Please, select Options -> General -> Disable strict model and firmware validation.